[335dlci]

I am purchasing a full black headliner conversion from a m3 and want to code the fzd. Does anyone know what I need to code properly for my vehicle? Thanks

[PichaDis11]

Default code the FZD to your VO. Should be good to go

[335dlci]

How do you default the fzd?

[335dlci]

Any further info for how to would be appreciated
Thanks

[Joe@TopGearSolutions]

Originally Posted by 335dlci

Any further info for how to would be appreciated
Thanks

What is the list of profiles that show up in NCS?

[335dlci]

Originally Posted by Joe@TopGearSolutions

What is the list of profiles that show up in NCS?

CNCoding and expert mode. Thanks again.

[Joe@TopGearSolutions]

Originally Posted by 335dlci

CNCoding and expert mode. Thanks again.

1. Start NCSExpert.
2. Load Profile and select Expertmode
3. F1 (VIN/ZCS/FA)
4. F3 (ZCS/FA f .ECU)
5. Choose E89
6. Select CAS
7. F6 (BACK)
8. F4 (Process ECU)
9. Select FZD (or any other module you want to revert back according to your VO)
10. F2->Choose "SG_Codieren->ok (should actually be selected for you)
11. F3->to start coding the ecu with factory settings according to the vehicle VO.

[335dlci]

Thank you. I may have to wait for. A newer set of daten files. After I had my seat mat sensor replaced at the dealer, which it was updated, I always get an error message

[Joe@TopGearSolutions]

Originally Posted by 335dlci

Thank you. I may have to wait for. A newer set of daten files. After I had my seat mat sensor replaced at the dealer, which it was updated, I always get an error message

What error(s) are you getting? Odds are it's not DATEN related, as FZD hasn't received an update in a long time.

[opjose]

Originally Posted by Joe@TopGearSolutions

What error(s) are you getting? Odds are it's not DATEN related, as FZD hasn't received an update in a long time.

Is the FZD involved with the seat sensor?

Isn't it more likely that they misconnected something during the mat repair?

[335dlci]

Originally Posted by Joe@TopGearSolutions

What error(s) are you getting? Odds are it's not DATEN related, as FZD hasn't received an update in a long time.

I received the error message after my car was in the dealer for service
May be NCS related. I forgot my ICOM at work. I can on Monday

[335dlci]

Originally Posted by opjose

Is the FZD involved with the seat sensor?

Isn't it more likely that they misconnected something during the mat repair?

I have been having issues changing code in the FRM after the update.

[opjose]

Originally Posted by 335dlci

I have been having issues changing code in the FRM after the update.

It is likely that they screwed up the K-Can wires.

They probably disconnected them, reversed them, or tapped into them.

You should start there.

Also see what modules appear in INPA.

The seat sensor does not hook into the FZD.

[335dlci]

Originally Posted by opjose

It is likely that they screwed up the K-Can wires.

They probably disconnected them, reversed them, or tapped into them.

You should start there.

Also see what modules appear in INPA.

The seat sensor does not hook into the FZD.

I know it's not directly hooked into the fzd. A seat mat sensor is plug and play. Once I get my icom from work I try it again and post the error.

[Joe@TopGearSolutions]

Originally Posted by 335dlci

I have been having issues changing code in the FRM after the update.

What version of DATENs are you currently using?