|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Upgraded rear m arms?
|
|
05-22-2014, 05:24 AM | #2 |
Lieutenant Colonel
76
Rep 1,518
Posts |
Rear is 5 link and the front has only 2.
With the rears one is the same, one is not interchangeable (toe arm) and one requires different rear dampers (lower arm). Changing just two of them will not have as much of an effect as the front does. Add into that the front arms increase camber whereas the rears will still give you the same limits with regards to geometry. IMO you'll feel a much bigger improvement doing the subframe mounts and front arms. I doubt you'll feel much of a change doing the rears. Coming from a guy who has a full m3 rear end on his with poly subframe bushes |
Appreciate
0
|
05-23-2014, 03:00 AM | #4 |
Colonel
112
Rep 2,621
Posts |
I'll have front and rear for sale.
The rears are worth doing as they have the stiffer m3 bushes. I had a bush fail so decided to go with the rears too.. The fronts are necessary to run more camber as mentioned.
__________________
Car: e91 330d with Viezu map
Gone but not forgotten: 2010 Jaguar XFR (Cat-back exhaust, pulley, intake mods and map), Highly Modified E90 335i LCI M Sport Manual (circa 480BHP/500lb ft) |
Appreciate
0
|
05-23-2014, 10:30 AM | #6 |
Colonel
112
Rep 2,621
Posts |
Sorry mate, deal just fell through...
We agreed a price and he still sold them anyway. Was due to collect tomorrow.. Back to the drawing board.
__________________
Car: e91 330d with Viezu map
Gone but not forgotten: 2010 Jaguar XFR (Cat-back exhaust, pulley, intake mods and map), Highly Modified E90 335i LCI M Sport Manual (circa 480BHP/500lb ft) |
Appreciate
0
|
Bookmarks |
|
|