[Miami Bimmer06]

I just got 20's on today, and I will like to get the back fenders rolled, and most likely the front as well. Can anybody body recommend a high quality shop that can do this.

Thanks, Carlos.

[335iheLLraiseR]

sorry Carlos i had to....

edit: how badly are you rubbing?

[Miami Bimmer06]

Lmao I knew you would lol.... I'm not rubbing in the back. its the front where I am having issues, I am going today to go and get thinner tires. What tires do you have in the front? I know you have 20's as well.

[RRGOO7]

Miami Chassis and Alignment aka MCA customs.....theyre the sh*t....what shoes did you get?

also i doubt theyll be able to roll the front fenders...there really isnt anyting to roll

[335iheLLraiseR]

Originally Posted by Miami Bimmer06

Lmao I knew you would lol.... I'm not rubbing in the back. its the front where I am having issues, I am going today to go and get thinner tires. What tires do you have in the front? I know you have 20's as well.

what offsets are you running and what size tires? i'm running 245/30 in the front, although i have a set of 235s i've been debating to put on.

you might be ok, just running a little bit of neg cam. depends on how bad it is.

Originally Posted by RRGOO7

Miami Chassis and Alignment aka MCA customs.....theyre the sh*t....what shoes did you get?

also i doubt theyll be able to roll the front fenders...there really isnt anyting to roll

he's right, the front fenders are pretty much plastic, they might be able to cut off the interior lip though.

[Miami Bimmer06]

I had to go with 225/35/20.
I got the HP Royalty's. where di you get yours done at?

[335iheLLraiseR]

Originally Posted by Miami Bimmer06

I had to go with 225/35/20.
I got the HP Royalty's. where di you get yours done at?

DAMN! and i was having second thoughts about my 235s.

I got it done at: Ultimate Autowerks 305-235-6344, but i left the fronts alone, i only had to do the rear.

edit: ask for Tato.

[Miami Bimmer06]

ok cool, how much did he charge you.

Update: I went twith the 225/35/20 in the front, and now I have no rubbing at all. Now just some vey minor rubbing in the back, but Im sure rolling the fendors will take car of that.

[335iheLLraiseR]

Originally Posted by Miami Bimmer06

ok cool, how much did he charge you.

Update: I went twith the 225/35/20 in the front, and now I have no rubbing at all. Now just some vey minor rubbing in the back, but Im sure rolling the fendors will take car of that.

i think it was $200, but he had the car for like 5 hours. he has to heat the fender before rolling it so the paint doesn't crack. but he actually just cut most of my interior lip off, then sealed it so it doesn't rust.

there is a place on bird and 90ave that does rolling for liek $50, friend of mine just did it there, 20's on 328.

[fasteddie222]

Originally Posted by 335iheLLraiseR

i think it was $200, but he had the car for like 5 hours. he has to heat the fender before rolling it so the paint doesn't crack. but he actually just cut most of my interior lip off, then sealed it so it doesn't rust.

there is a place on bird and 90ave that does rolling for liek $50, friend of mine just did it there, 20's on 328.

is that place on bird and 90 ave any good for rolling fenders? has your friend had any problems?

[335iheLLraiseR]

Originally Posted by epimps22

is that place on bird and 90 ave any good for rolling fenders? has your friend had any problems?

he says it still rubs but not that often.

[Miami Bimmer06]

Miami chasis did it for $100, they heat it up, then rolled it, ans no paint cracks, nor any deformation on my fender, he did an awesome job.

[fasteddie222]

thanks and how long does this take?

[Miami Bimmer06]

Not too long dude, maybe an hr, the most an hr and a half, the guy at miami chasis does awesome work

[eguti335i]

For those of you in South Miami, not looking into a 1.5 hour drive for a fender roll can hit up Ed - 7 8 6 4 8 6 5 7 8 4. Just got me rears done today. This kid knows what hes doing, you wont regret it.

It seems like 'the fender rolling king of miami', Anthony, no longer does this so Ed is kost likely the best option around this area.

[jimtor]

Originally Posted by eguti335i

For those of you in South Miami, not looking into a 1.5 hour drive for a fender roll can hit up Ed - 7 8 6 4 8 6 5 7 8 4. Just got me rears done today. This kid knows what hes doing, you wont regret it.

It seems like 'the fender rolling king of miami', Anthony, no longer does this so Ed is kost likely the best option around this area.

I rolled my fenders with this guy Ed, he charged me $70, he is a nice guy, i have a 2011 328i with M sport suspension, i got 220M style on it 245/35/19 - 19x8.5+29 front, 265/30/19 - 19x9.5+23 rear, I was having rubbing issues on the rear, it took him about 1 hour 1/2 to 2 hours to roll the fenders, he heated them to prevent paint damage, rolled them and also pulled them out a bit, he said it will make more space for the tire, at the end the car was more bulk and aggressive sport looking, it look very good, i like it but still have rubbing also the right fender got a little deformation when he pulled it out, I was not happy about it, he said shit happens some times lol, it was very hard to notice so i didn’t mind much.

Now im looking some one else to roll my fenders again, the rubbing is not that bad anymore but still there when having 4 people on the car or going through deep uneven waiving road, the rubbing is happening right were the fender meet with the rear bumper, if you know some one else good at rolling fenders please share the info

[Chico305335i]

Hey my boy alfredo u can follow him at on dlaperformance dm him I think his number is on there as well he has a shop in Miami Gardens check him out all he does work on every car he started off fender rolling years ago but specializes on Honda S2000 and Nissan GT-R does any mechanic work he right off the palmetto expressway

[eddiethefendergod]

Just letting everyone know I specialize in fender rolling in the Miami area! My name is Eddie and I've been rolling/pulling/flaring fenders since 2010. I myself drive an e36 m3 . Feel free to call or text me 7864865784 or check my work on Facebook or Instagram @eddiethefendergod