[beaucz]

Hi guys, I've been learning how to code for a little while now and I've successfully coded Mirrors with fob, Dension Gateway video with ipod, and all my lights (minus headlights) after installing leds but I ran into one problem that I can't seem to find an answer for after few days of searching. I have no errors in dash or nav but for some reason my brake lights still flickers like crazy at start like its still running the light test but only brake light. Any body have any idea Please let me know. would be greatly appreciated.

2007 e92 (2006 production)

coded so for for the brake lights in frm

KALTUEBERWACHUNG_BL_L
nicht_aktiv
KALTUEBERWACHUNG_BL_M_1
nicht_aktiv
KALTUEBERWACHUNG_BL_R
nicht_aktiv
WARMUEBERWACHUNG_BL_L
nicht_aktiv
WARMUEBERWACHUNG_BL_M_1
nicht_aktiv
WARMUEBERWACHUNG_BL_R
nicht_aktiv
CC_MELD_BFD_BL
nicht_aktiv
FEHLERMELDUNG_CC_BFD_L
nicht_aktiv
FEHLERMELDUNG_CC_BFD_R
nicht_aktiv

[xelion]

Dump your FSW_PSW.trc file here, we'll see

[beats]

hey guys, I have read the first 40 pages, and haven't found the answers yet in this thread, or any other from what I can tell...

So I apologize if this has been asked numerous times before, but I can't find the answer (yet).

Anyway, I have been able to connect with NCSExper, but got an error message of "Following feature is invalid for FA:$6NR", I have found info that leads me to believe my Daten files are outdated.

I have a 2011 M3 Coupe

I have downloaded SP-Daten E89 V48.1 (15.3GB file) and Ediabas 7.2

Will these files work for me? What exactly do I copy from this 15gb Daten file?

Help is greatly appreciated.

Cheers!

[euro92]

Originally Posted by vadim77

Did you try together with ANLASSERSPERRE_P? or another function in sum?

Anyone figure this out? Start 6MT without depressing clutch?

[xelion]

Originally Posted by skru_fase

hey guys, I have read the first 40 pages, and haven't found the answers yet in this thread, or any other from what I can tell...

So I apologize if this has been asked numerous times before, but I can't find the answer (yet).

Anyway, I have been able to connect with NCSExper, but got an error message of "Following feature is invalid for FA:$6NR", I have found info that leads me to believe my Daten files are outdated.

I have a 2011 M3 Coupe

I have downloaded SP-Daten E89 V48.1 (15.3GB file) and Ediabas 7.2

Will these files work for me? What exactly do I copy from this 15gb Daten file?

Help is greatly appreciated.

Cheers!

Standard Tools 2.12 will resolve your FA issue.

[beats]

Originally Posted by xelion

Standard Tools 2.12 will resolve your FA issue.

I'm getting a 'chassis is faulty' error now. Anyone know how to resolve this?

The version of NCSExpert I have only came with the default profile, so I copied another profile set over and was using Expermode (OFFEN) if that makes any difference...

Thanks xelion / everyone for your help

[xelion]

Originally Posted by skru_fase

I'm getting a 'chassis is faulty' error now. Anyone know how to resolve this?

The version of NCSExpert I have only came with the default profile, so I copied another profile set over and was using Expermode (OFFEN) if that makes any difference...

Thanks xelion / everyone for your help

Create E89 folder in C:\NCSEXPER\DATEN\ and copy all files from SP-daten\daten\ into it.

[beats]

Xelion, thanks again, I actually ended up using BMW Coding Tool 2.5 which did the same thing and took all the guesswork out. Great program....

[undermine]

Originally Posted by bumere90

guys, don't buy cheap eBay cables, they do not work.
don't waste your time and money

I bought two of them on eBay first one worked for a while, I may have damaged it from rolling it up, 2nd one was it's replacement, I honestly think for the $20. or less it's been worth it, I have just retrofit Adaptive Xenon Headlamps in place of stock Halogen to my 2011 328i.

Looks awesome, cool to see them working when turning the wheel. COM Box for BT Audio Stream, and possibly CAS next for FOB Window Roll-up.

[alexwhittemore]

Originally Posted by undermine

I bought two of them on eBay first one worked for a while, I may have damaged it from rolling it up, 2nd one was it's replacement, I honestly think for the $20. or less it's been worth it

When they cost $20-25 vs $100, 4 or 5 tries is certainly a lot of chances to get it right. My ebay special worked first try.

[marconi118]

How to code Head unit to HIFI?
I start from zero, have only coded N54 injectors with inpa

[undermine]

Lets not be negative, or shall we, I certainly hate sending money over seas but yeah it was cheap, it's not that it didn't work, it worked perfectly, eventually it died but this was after a few months, not sure why, I am on my second one and I use it a lot, I mean at least 20 times a week, I just coded windows, mirrors close from fob, so many features disabled from dealer.

Originally Posted by alexwhittemore

When they cost $20-25 vs $100, 4 or 5 tries is certainly a lot of chances to get it right. My ebay special worked first try.

[gimmethemuumuu]

Originally Posted by euro92

Anyone figure this out? Start 6MT without depressing clutch?

I would also like to know the answer to this. I believe I was able to set this previously on my E46 M3. And I'd like to do so now on my 2008 E90 M3.

Any ideas or successes, anyone?

TIA

[razorback5]

Hey guys, I'm getting a "Chassis is Faulty" After loading EXPERTMODE and selecting E89. Are my daten files outdated? INPA works great but I'm sure there is a simple solution for this. Any help much appreciated! If someone has the current files for INPA and NCSExpert I would gladly start over with those.

[xelion]

Originally Posted by razorback5

Hey guys, I'm getting a "Chassis is Faulty" After loading EXPERTMODE and selecting E89. Are my daten files outdated? INPA works great but I'm sure there is a simple solution for this. Any help much appreciated! If someone has the current files for INPA and NCSExpert I would gladly start over with those.

go to c:\NCSEXPER\DATEN\ and creat here new E89 folder, then copy all files from sp-daten\DATEN\*.* to C:\NCSEXPER\DATEN\E89 and all will be fine.

[razorback5]

Originally Posted by xelion

go to c:\NCSEXPER\DATEN\ and creat here new E89 folder, then copy all files from sp-daten\DATEN\*.* to C:\NCSEXPER\DATEN\E89 and all will be fine.

Thanks for the reply but I can't find sp-daten\DATEN\*.* to put into the new folder. Could you help me with that step. Again, thanks for the quick reply! Edit: I removed INPA and NCSexpert and reinstalled the S/W from the beginning of this thread from the Russian site. Again same problem...INPA works great and can complete all the steps in NCS with the profiles and consistency check is O.K but after I load a profile and select E89 I still get Chassis is faulty. Does anyone have the newer daten files?

[razorback5]

Finally got it...after I erased all the different versions I had downloaded to get it to work and reinstalled it again and changed the sp-daten files thanks to Paul. Changed the port setting to 1 and it all worked. Now onto programming some options,

[beats]

I have a U.S. (but live in Canada) M3, and I've been able to switch most info over to metric however when I set the cruise control it shows in the display in MPH. Does anyone know if there is a setting to code this to Metric/KMH?

Thanks!

[ethok]

I am new to this forum. My issue is my front passenger side low beam was out (2007, 328i). It had the stock headlamp housing from Valeo. The headlamp was fine except that the wires were kind of exposed. I replaced the headlamp assembly with an aftermarket product. Still the front passenger side low beam will not turn on. So I think the issue is with my FRM. Is it possible that FRM had anticipated the short circuit in the stock headlamp assembly and cut off the power? SO it is still thinking I have the stock one?

Or it is possible that I need to replace my FRM.

Sorry for my ignorance, but some questions come to my mind.

1) where is the FRM located?
2) How i check whether it is damaged or it just need to be recoded.
3) How do i do the recoding?
4) If i have to buy a new FRM, which model/part number should i get?

Please help me

[lito29]

Just like to write Thanks! to all forum members that contributed to the forums post. I have been able to work on my BMW with confidence! I am currently working on my 3rd BMW (got rid of the first one bc I didn't know how to take care of it back in 2005 ) my 2nd BMW I still have since 2007( Blue 2002 e46 330i) done several DIY's with multiple forum help... My 3rd BMW is a Black 2009 e90 335i xDrive w/iDrive 6sp-MT, just replaced the CDV for better shifting. I want to do more upgrades that's why I'm here get info on how to code, learning a lot.

Thanks Again!

[sillygoat]

Originally Posted by ethok

I am new to this forum. My issue is my front passenger side low beam was out (2007, 328i). It had the stock headlamp housing from Valeo. The headlamp was fine except that the wires were kind of exposed. I replaced the headlamp assembly with an aftermarket product. Still the front passenger side low beam will not turn on. So I think the issue is with my FRM. Is it possible that FRM had anticipated the short circuit in the stock headlamp assembly and cut off the power? SO it is still thinking I have the stock one?

Or it is possible that I need to replace my FRM.

Sorry for my ignorance, but some questions come to my mind.

1) where is the FRM located?
2) How i check whether it is damaged or it just need to be recoded.
3) How do i do the recoding?
4) If i have to buy a new FRM, which model/part number should i get?

Please help me

i need help with resetting the FRM as well.. if you guys can help id appreciate it!

thanks

[xelion]

Originally Posted by sillygoat

i need help with resetting the FRM as well.. if you guys can help id appreciate it!

thanks

Resetting? You should use EXPERTMODUS profile and SG_CODIEREN in NCS Expert, that's it.