[KaOsTiK]

Product: MyCarr's Angel Eye kit

Note: bolts that have been illustrated for removal, must be done so on both sides of the car.

Tools Required:
- socket wrench (socket kit would be better)
- 8mm socket
- 10mm socket
- flathead screwdriver
- flathead stubby
- torx driver set

Optional Tools:
- car jack
- monkey (to hold your work lights)

Instructions:
- jack up car (optional)
- if you're doing a ghetto install like we did, jack up one side of the car

note these two locations


- remove these screws (8mm socket)


- use a flathead stubby to remove this access panel. i forgot to take a proper picture, but just above this panel (above the second red circle) is another 8mm bolt you'll need to remove.


- remove this 8mm bolt behind the wheel


- remove this 10mm bolt from behind the wheel


- remove these two bolts underneath the car


- remove this bolt from the edge of the bumper, under the car


- on the passenger side, you'll see a grill similar to this. remove the four 8mm bolts


monkey holding the work lights (optional)


- once the bolts are all removed, yank out the fender liner


- use a flathead to remove this plastic cover by the two tabs (top and bottom). behind it, there's a bulb held in by two torx screws. i don't have a picture of it, but it'll be blatantly obvious once you remove this black cover. be sure to disconnect the two wires connected to the bulb in addition to removing the 2 torx screws.


- connect the two wires to the +/- pins on your aftermarket angel eyes. note the brown is your negative.


- replace the angel eyes with the wires on the bottom, and screw in place. replace your fender liner and bolts.


here's the MyCarr box with the oem angel eye bulb removed


Finished product


more...Finished product

[dr004]

Thanks for the write up....will be installing mine this weekend

[dar2008]

Wow, what a big job! I've just ordered some GP Thunder H8's for my e93,... hoping I can install those from inside the engine bay, like on the e92(?)

[EZ_TUR90]

Originally Posted by dar2008

Wow, what a big job! I've just ordered some GP Thunder H8's for my e93,... hoping I can install those from inside the engine bay, like on the e92(?)

e93 is the same as e92 you shouldnt have any trouble.

NICE DIY!!!

[perfectg]

it was a task thats for sure. no where as easy as they said in the instructions

[KaOsTiK]

Originally Posted by perfectg

it was a task thats for sure. no where as easy as they said in the instructions

no shit...
the stupid instructions only had three small pics and no text. and those other diy's that were dug up were ill-informative and had crappy pics

[BillLee]

the hardest part is removing the fender liners! it took me so long

[Spydeputy]

mucho graseas. cheers

[Delta0311]

I must say you keep your monkey pretty well dressed.

[E92-Lighting]

nice write up

[sowrab]

These instructions are great but i just dont think i can do it by myself

[sowrab]

So i might be able to get this installed, and i want to be using the red angel eyes
http://www.nlmotoring.com/BMW-E90-E9...p/1102267r.htm
is that good or no?

[E92-Lighting]

Originally Posted by sowrab

So i might be able to get this installed, and i want to be using the red angel eyes
http://www.nlmotoring.com/BMW-E90-E9...p/1102267r.htm
is that good or no?

no, its not good, they are selling version 1, not version 2, its not even that bright at all

[Darin911]

Do u have to do it from the front?? can you install it from the hood???

[ZuerstBMW]

How much was this kit?

[KaOsTiK]

Originally Posted by Darin911

Do u have to do it from the front?? can you install it from the hood???

not on the e90s..iirc

[iheartsole]

the best DIY yet! nice job! looks awesome. where did you get the AE?

[KaOsTiK]

Originally Posted by iheartsole

the best DIY yet! nice job! looks awesome. where did you get the AE?

thanks
my friend bought them thru geformt-performance.com

[mds82]

Much more clear instructions can be found here: http://www.namotorsports.net/detail....t_cd/MDSLUX5.0 Under the Instructions Page

[eazye]

Used a combo of these Angel Eye DIY's to change mine tonight. Great write-ups and VERY EASY to install. I didn't even use the guides after looking them over initially. If you can put a socket on a nut or use a screw driver, it is crazy simple! I am a new 330i owner but it is my baby and was a little nervous at first, didn't want to hurt it. With the guides and a little common sense, piece of cake! Thanks everyone for the effort to make these guides!

[Mega Man]

Great! How do they look during the day?

[ankman]

i cant get the plastic cover with the tabs on the top and bottom off over the angel eyes. i got the top the bottom wont budge..if i undo the bottom i cant get the top out. any suggestions? Also how do i remove the DRL bulbs?