Tool32 simulated soot mass display.

ninja_zx11 · 09-25-2017, 04:00 PM

Hi,
Trying to read simulated soot mass in my DPF with tool32 on my 2009 X5 35D.

Reading doesn't seem to be right.My regen starts when soot level hits 3.0 g as per tool32.But it doesnt make sense.I think decimal place in the result is somehow wrong and i belive its supposed to be 30g.Its not like my X5 is regenerating too often.Regens are happening at normal intervals from 250 kms to 300 kms city driving and as per tool32 result,it takes 250 to 300 kms for the soot to go from 0 to 3g which doesn't make sense.I am using D73N57C0.prg in tool32.Any ideas please?

Here are my results from all possible stat jobs but i am not able to understand them because of German.

Code:

STAT_PFltLd_mSotSimCont_EINH    = g
  STAT_PFltLd_mSotSimCont_INFO    = kontinuierlich simulierte Partikelmasse
  STAT_PFltLd_mSotSimCont_WERT    = 2.180000E+000
  STAT_PFlt_mSotNoComplMax_mp_EINH = g
  STAT_PFlt_mSotNoComplMax_mp_INFO = Kennfeld zur Bestimmung Überwachungsgrenze
  STAT_PFlt_mSotNoComplMax_mp_WERT = 4.360000E+000
  STAT_PFlt_mSotSumMeasFlt_mp_EINH = g
  STAT_PFlt_mSotSumMeasFlt_mp_INFO = digital gefilterter Wert der gemessenen Rußmasse
  STAT_PFlt_mSotSumMeasFlt_mp_WERT = 0.000000E+000
  STAT_PARTIKELMASSE_SIMULIERT_EINH = g
  STAT_PARTIKELMASSE_SIMULIERT_INFO = simulierte Rußmasse
  STAT_PARTIKELMASSE_SIMULIERT_WERT = 2.180000E+000
  STAT_PFlt_mSotMeasNoCompl_mp_EINH = g
  STAT_PFlt_mSotMeasNoCompl_mp_INFO = gemessene Rußmasse
  STAT_PFlt_mSotMeasNoCompl_mp_WERT = 0.000000E+000
  STAT_PFlt_mSotSumSimActEff_mp_EINH = g
  STAT_PFlt_mSotSumSimActEff_mp_INFO = Ergebnis der Summation des simulierten Wertes
  STAT_PFlt_mSotSumSimActEff_mp_WERT = 0.000000E+000
  STAT_PFlt_mSotSumMeasActEff_mp_EINH = g
  STAT_PFlt_mSotSumMeasActEff_mp_INFO = Rußmassenintegral des gemessen Werts (gefiltert)
  STAT_PFlt_mSotSumMeasActEff_mp_WERT = 0.000000E+000
  STAT_RUSSMASSE_IM_PARTIKELFILTER_EINH = g
  STAT_RUSSMASSE_IM_PARTIKELFILTER_INFO = Rußmasse
  STAT_RUSSMASSE_IM_PARTIKELFILTER_WERT = 2.166778E+000
  STAT_PFlt_mSotSumMeasActEffFlt_mp_EINH = g
  STAT_PFlt_mSotSumMeasActEffFlt_mp_INFO = Rußmassenintegral des gemessen Werts
  STAT_PFlt_mSotSumMeasActEffFlt_mp_WERT = 0.000000E+000

Yozh · 09-25-2017, 09:19 PM

Have you tried running those parameters in TestO?

ninja_zx11 · 09-25-2017, 09:46 PM

Quote:

Originally Posted by Yozh

Have you tried running those parameters in TestO?

Never thought about it.Good idea.will try that.

09-25-2017, 09:19 PM	#2
Yozh Colonel 870 Rep 2,615 Posts Drives: 2011 335d M-Sport Join Date: Mar 2014 Location: Wet Coast iTrader: (4)	Have you tried running those parameters in TestO?
	Appreciate 0 Quote