BMW Portable Navigation Part Number Needed

von Schultz · 05-22-2012, 04:32 PM

Can someone tell me what is the difference between the first mount (http://www.e90post.com/forums/attach...1&d=1321409015) and the second one (http://www.e90post.com/forums/attach...1&d=1332161726)

I think they are not the same - first one comes with the cover as well. Do you have part numbers perhaps?

smass · 05-22-2012, 06:10 PM

The second mount was one I recently ordered. My guess is the first mount is the first version of the kit form a few years ago. Reading the instructions for the first version of the mount you were required to screw the bracket into the face of the dash! I was glad that I can remove mine without any permanent damage.

The part number I used is this one
http://www.ecstuning.com/Search/65900445990/ES256206/

ECSTuning · 05-24-2012, 12:11 PM

Quote:

Originally Posted by smassey321

The second mount was one I recently ordered. My guess is the first mount is the first version of the kit form a few years ago. Reading the instructions for the first version of the mount you were required to screw the bracket into the face of the dash! I was glad that I can remove mine without any permanent damage.

The part number I used is this one
http://www.ecstuning.com/Search/65900445990/ES256206/

Smassey is correct, one is the early version and the other is the revised version. The early version requires some changes which can not be easily reversed.

von Schultz · 05-25-2012, 07:04 AM

So, your version is also oem bmw part? I can't see any cover for the mount, did you get one?

One more thing - is your mount compatible with other Garmin devices as well? For instance, i have 1490T.

Thanks.

Quote:

Originally Posted by smassey321

The second mount was one I recently ordered. My guess is the first mount is the first version of the kit form a few years ago. Reading the instructions for the first version of the mount you were required to screw the bracket into the face of the dash! I was glad that I can remove mine without any permanent damage.

The part number I used is this one
http://www.ecstuning.com/Search/65900445990/ES256206/

smass · 05-25-2012, 07:47 AM

Quote:

Originally Posted by Catalyst Group

So, your version is also oem bmw part? I can't see any cover for the mount, did you get one?

One more thing - is your mount compatible with other Garmin devices as well? For instance, i have 1490T.

Thanks.

Yes I bought the OEM part from Tischer. ECS sells the identical part number. I did not get a cover. The mount has a Garmin ball and will mount to any Garmin that uses the ball mount.

In the pic above without the GPS shown, the BMW mount / ball has the Garmin 1450T bracket snapped on it. Here is a good pic of the ball.

getby25 · 06-27-2012, 11:49 PM

hi guys i am interest this navigation mount kit.

so the kit from the picture is all we need for setting up ?

smass · 06-28-2012, 05:53 AM

The kit in this thread is for mounting a BMW Nuvi. Most of us mounted a generic Nuvi. All I used from the kit was the actual bracket and screws. I then wired a female cigarette power outlet to the car using the wiring diagram provided by the kit. Plug the Nuvi into the female plug. Hide the wire behind the bracket. I notched the dash rather than drilling a hole because the micro usb would not fit through the hole. Then snap your Nuvi bracket into the ball shown in the picture above.

skepsis · 07-27-2012, 08:44 AM

is there any installation guide for the new kit. or do you follow the same general instructions as the old kit

smass · 07-27-2012, 09:16 AM

Quote:

Originally Posted by skepsis

is there any installation guide for the new kit. or do you follow the same general instructions as the old kit

Here you go. You can ignore most of these. Only worry about the bracket mounting, power and ground wire.
http://www.e90post.com/forums/showpo...31&postcount=6

skepsis · 07-27-2012, 11:03 AM

thank you smassey

whats the best way to get power to the unit. im going to be putting a generic nuvi into the ball mount.

jan31 · 12-30-2012, 09:47 AM

does the vehicle needs to be coded after the installation regardless which unit i use?

Dino355 · 12-30-2012, 10:17 AM

Quote:

Originally Posted by jan31

does the vehicle needs to be coded after the installation regardless which unit i use?

No coding required.

smass · 12-30-2012, 10:18 AM

Coding is only needed if you wanted the radio to mute when directions are voiced with the BMW kit. This is not possible with the Garmans. I did not even hook up the voice muting wires that came with the kit. I simply cut and taped them off.

CrAzY ChInOz · 12-30-2012, 11:24 AM

Coding only require if u are using the BMW navigation device if you want the sound to come out the car speakers.

If you using regular garmin GPS, it does not require coding since sound is not possible through car speaker once coded. I coded mine anyways for shits and giggles and no sound from radio

jan31 · 12-31-2012, 10:06 AM

thanks for the info!

Kbimmer · 04-09-2013, 02:11 PM

Quote:

Originally Posted by smassey321

Yes I bought the OEM part from Tischer. ECS sells the identical part number. I did not get a cover. The mount has a Garmin ball and will mount to any Garmin that uses the ball mount.

In the pic above without the GPS shown, the BMW mount / ball has the Garmin 1450T bracket snapped on it. Here is a good pic of the ball.

Sorry for resurrecting this thread, but I just bought this mount and I have a quick question:

I plan to use a generic garmin that I have that does use the ball mount, but the ball in the bmw socket has this "little pin" sticking out in the centre...

Does new garmins make use of that ? can I "shave" it off ? Mine (which probably is about 3 years old) will not fit in the ball if I do not shave that pin off.

thanks !

smass · 04-09-2013, 02:34 PM

I think you could shave it off without issue. The bmw ball w/ pin snapped right in to the Nuvi I bought a year ago. The mount has a hole for the pin to go in. I don't think it does anything except prevent it from rotating to far to the left or right. Any chance you have the Garmin mount upside down?

Kbimmer · 04-09-2013, 03:58 PM

thanks for the feedback

It doesnt matter, I tried both sides and will not snap in with this little pin in there... I just wanted to double check before I shave it off because I plan to use my unit for another 2-3 weeks until I get the new one, and I was worried that the new ones may need this pin for something.

steveindabmer · 10-29-2014, 11:54 AM

Has anyone mounted a Nexus 7 to this? Looking at using this for a tablet mount? What do you guys think? Will it be sturdy enough?

Dino355 · 10-29-2014, 11:56 AM

Quote:

Originally Posted by steveindabmer

Has anyone mounted a Nexus 7 to this? Looking at using this for a tablet mount? What do you guys think? Will it be sturdy enough?

It won't fit without extensive modification of course. I have a Nexus 7 and it's heavier than the Garmin unit that this mount is intended for.

steveindabmer · 10-29-2014, 01:08 PM

Thanks for the response Dino335. do you use your N7 in the car? If so, what do you use for mounting?

Dino355 · 10-29-2014, 01:10 PM

Quote:

Originally Posted by steveindabmer

Thanks for the response Dino335. do you use your N7 in the car? If so, what do you use for mounting?

No never! It's too big! I do use my HTC One M8 though.

I have one of these univeral mounts and it's brilliant: CLICKY

05-22-2012, 04:32 PM	#23
von Schultz Private 5 Rep 59 Posts Drives: 2011 Join Date: Jan 2012 Location: Croatia iTrader: (0)	Can someone tell me what is the difference between the first mount (http://www.e90post.com/forums/attach...1&d=1321409015) and the second one (http://www.e90post.com/forums/attach...1&d=1332161726) I think they are not the same - first one comes with the cover as well. Do you have part numbers perhaps?
	Appreciate 0 Quote

05-22-2012, 06:10 PM	#24
smass Lieutenant Colonel 396 Rep 1,578 Posts Drives: 06 325i - 10 335i Join Date: Sep 2010 Location: Scottsdale, AZ iTrader: (1) Garage List 2010 E90 335i [0.00] 2016 F15 35i [0.00] 2003 E53 3.0 [0.00] 2006 E90 325i [0.00]	The second mount was one I recently ordered. My guess is the first mount is the first version of the kit form a few years ago. Reading the instructions for the first version of the mount you were required to screw the bracket into the face of the dash! I was glad that I can remove mine without any permanent damage. The part number I used is this one http://www.ecstuning.com/Search/65900445990/ES256206/
	Appreciate 0 Quote

06-27-2012, 11:49 PM	#28
getby25 Private 7 Rep 86 Posts Drives: 06 325xi Join Date: Jun 2012 Location: RI USA iTrader: (0)	hi guys i am interest this navigation mount kit. so the kit from the picture is all we need for setting up ?
	Appreciate 0 Quote

06-28-2012, 05:53 AM	#29
smass Lieutenant Colonel 396 Rep 1,578 Posts Drives: 06 325i - 10 335i Join Date: Sep 2010 Location: Scottsdale, AZ iTrader: (1) Garage List 2010 E90 335i [0.00] 2016 F15 35i [0.00] 2003 E53 3.0 [0.00] 2006 E90 325i [0.00]	The kit in this thread is for mounting a BMW Nuvi. Most of us mounted a generic Nuvi. All I used from the kit was the actual bracket and screws. I then wired a female cigarette power outlet to the car using the wiring diagram provided by the kit. Plug the Nuvi into the female plug. Hide the wire behind the bracket. I notched the dash rather than drilling a hole because the micro usb would not fit through the hole. Then snap your Nuvi bracket into the ball shown in the picture above.
	Appreciate 0 Quote

07-27-2012, 08:44 AM	#30
skepsis New Member -2 Rep 20 Posts Drives: 2019 F32 Join Date: May 2011 Location: FL iTrader: (1) Garage List 2011 335i [0.00] 2002 Acura TL [0.00]	is there any installation guide for the new kit. or do you follow the same general instructions as the old kit
	Appreciate 0 Quote

07-27-2012, 11:03 AM	#32
skepsis New Member -2 Rep 20 Posts Drives: 2019 F32 Join Date: May 2011 Location: FL iTrader: (1) Garage List 2011 335i [0.00] 2002 Acura TL [0.00]	thank you smassey whats the best way to get power to the unit. im going to be putting a generic nuvi into the ball mount.
	Appreciate 0 Quote

12-30-2012, 09:47 AM	#33
jan31 First Lieutenant 36 Rep 332 Posts Drives: 2014 F32 428I Xdrive (N26) Join Date: Dec 2012 Location: SA, TX iTrader: (1) Garage List 2014 F32 428I XDRIVE [0.00]	does the vehicle needs to be coded after the installation regardless which unit i use? __________________
	Appreciate 0 Quote

12-30-2012, 10:18 AM	#35
smass Lieutenant Colonel 396 Rep 1,578 Posts Drives: 06 325i - 10 335i Join Date: Sep 2010 Location: Scottsdale, AZ iTrader: (1) Garage List 2010 E90 335i [0.00] 2016 F15 35i [0.00] 2003 E53 3.0 [0.00] 2006 E90 325i [0.00]	Coding is only needed if you wanted the radio to mute when directions are voiced with the BMW kit. This is not possible with the Garmans. I did not even hook up the voice muting wires that came with the kit. I simply cut and taped them off.
	Appreciate 0 Quote

12-30-2012, 11:24 AM	#36
CrAzY ChInOz Second Lieutenant 18 Rep 218 Posts Drives: E92 Join Date: Oct 2011 Location: East Coast iTrader: (16)	Coding only require if u are using the BMW navigation device if you want the sound to come out the car speakers. If you using regular garmin GPS, it does not require coding since sound is not possible through car speaker once coded. I coded mine anyways for shits and giggles and no sound from radio
	Appreciate 0 Quote

12-31-2012, 10:06 AM	#37
jan31 First Lieutenant 36 Rep 332 Posts Drives: 2014 F32 428I Xdrive (N26) Join Date: Dec 2012 Location: SA, TX iTrader: (1) Garage List 2014 F32 428I XDRIVE [0.00]	thanks for the info! __________________
	Appreciate 0 Quote

04-09-2013, 02:34 PM	#39
smass Lieutenant Colonel 396 Rep 1,578 Posts Drives: 06 325i - 10 335i Join Date: Sep 2010 Location: Scottsdale, AZ iTrader: (1) Garage List 2010 E90 335i [0.00] 2016 F15 35i [0.00] 2003 E53 3.0 [0.00] 2006 E90 325i [0.00]	I think you could shave it off without issue. The bmw ball w/ pin snapped right in to the Nuvi I bought a year ago. The mount has a hole for the pin to go in. I don't think it does anything except prevent it from rotating to far to the left or right. Any chance you have the Garmin mount upside down?
	Appreciate 0 Quote

04-09-2013, 03:58 PM	#40
Kbimmer First Lieutenant 18 Rep 306 Posts Drives: 335i M-Sport Join Date: Feb 2012 Location: Brampton iTrader: (3)	thanks for the feedback It doesnt matter, I tried both sides and will not snap in with this little pin in there... I just wanted to double check before I shave it off because I plan to use my unit for another 2-3 weeks until I get the new one, and I was worried that the new ones may need this pin for something. __________________ '11 335i Sapphire Black on Chestnut Brown + Premium \| Cold Weather \| M-Sport '06 325i Black on Terracota + Sports \| Premium \| Cold Weather - SOLD '99 323i Silver on Black + Sports \| Cold Weather - SOLD '97 328i Black on Black - SOLD
	Appreciate 0 Quote

10-29-2014, 11:54 AM	#41
steveindabmer Private First Class 48 Rep 112 Posts Drives: 2019 440i Xdrive M-Sport Join Date: Dec 2013 Location: Allentown iTrader: (0)	Has anyone mounted a Nexus 7 to this? Looking at using this for a tablet mount? What do you guys think? Will it be sturdy enough?
	Appreciate 0 Quote

10-29-2014, 01:08 PM	#43
steveindabmer Private First Class 48 Rep 112 Posts Drives: 2019 440i Xdrive M-Sport Join Date: Dec 2013 Location: Allentown iTrader: (0)	Thanks for the response Dino335. do you use your N7 in the car? If so, what do you use for mounting?
	Appreciate 0 Quote