[makkan00]

Originally Posted by AWBimmer

Not yet Man. Bee busy at work. I've taken car back to my air ride installer as it needed finishing up and have asked him to look into it.

What's strange is that the fuse box diagram suggests it could be fuse #61... but there isn't even a 61 in my fuse box.... so really strange.

My glove box light, boot ligjt and cic screen aren't on which has to be one thing only.... A fuse.

So really baffled why that's not even in there and where it could be.

Its simple then.
Look at the fuse diagram on yours and find the small light. Check the fuse no next to it and check that.

The diagram which you posted in your first post, check the digram of light next to fuse 61. You will have to find that diagram on your fuse box diagram and get the job done. 10 minutes max bud.

[AWBimmer]

Thanks sam
ill tell my installer to chop chop then. Lolll

[AWBimmer]

All fixed. It was indeed fuse number 61.

Thank you all and in particular Mak for the offline help too.

Happy ending

['V']

Woohoooo!!!
Simple fix - always a good thing.

[powerc1015]

I have 2010 E92 335xi with factory CIC and the screen on CIC went black.

It turned on and off by itself couple times while driving and now it wont turn on at all.

Audio and radio is working and CIC controller is litting up orange.

checked the power cable with multimeter on red & brown wire from the 4 wires on the power cable but it only has 1.3V coming out.
I have 12V coming from Cig lighter.

Checked fuse 13,61,77,14,58,76 and there is no fuse for 23,34,2,31,60,18,19 as some of other forums told me to check.
Does it seems like Emulator or am I missing a fuse to check or just need a new screen?
I have no idea on this lol.
ANY HELP??????

[ptpending]

the display is powered from same wire as headunit, so you need carefully isolate these pins and route new from headunit harness