[E90PWR]

i did not lie
i used the same extended bolts supplied by the previous owner
i had no issues

[997turbo]

for the price you were asking, there better of have been so called "FREE" bolts included. too bad they weren't the right ones as claimed in our PM conversation.

should of just bought new ones,
instead of being deceived and belittled by a deceptive seller.

[E90PWR]

they were the exact extended bolts supplied by the previous owner which i had tested with 17" 18" 19" wheels

i did not deceive you

[997turbo]

and what warrants you to submit negative feedback against my account?

i never installed them because they are not the correct bolts for 20mm spacers, which is contrary to your false accusation in the feedback comment.

[997turbo]

if you are so dead set that these bolts are good for 20mm spacers and everyone else should agree as well, then why not provide me with a refund
and sell them to someone else? should be no problem right?

im sure other buyers will agree with you ...?

these will go fast !

[E90PWR]

i sold you the spacers & included the extended bolts at no extra cost
so why should i give you a refund?
i told you i had used them for over a year with no issues
that is your problem whether you want to use them or not

[997turbo]

i like how you allocate monetary value of the parts you were selling..
very deceiving

how about i bought the bolts and u gave me free spacers? same idea no?

obviously you don't read, because had i known you FREE bolts were garbage, i would of never bought your spacers. make sense?

[mister wiggles]

so how much for the 15/20mm spacers? i need a set.

[997turbo]

just buy them new, don't save much buying from this seller
plus it
isn't worth the time with shady parts

[335TWNTURBO]

I think you guys should fight on Pay-per-view

[Kit523]

Originally Posted by 335TWNTURBO

I think you guys should fight on Pay-per-view

[E46toE90]

jerry jerry jerry

where are th moderators?

[DESI4life10]

Getting the proper length bolts for spacers is critical. Sure the smaller length bolts will work with the spacers, but they will not be safe. The load that gets carried through these bolt when taking the car on the track (or even for daily driving) doing sharp turns is very large and will be a safety hazard.

You need a minimum of 7-9 full turns (I believe) when using extended bolts on spacers. The bolts (whether they are free or not) should have never been paired with the spacers that were sold.

With those short bolts, you may only be getting 2-3 full turns on the bolts before it has to be torqued down.
The buyer did the right thing in buying proper size bolts for the spacer. Again normal DD may be fine with those smaller bolts (which is why seller didn’t notice anything wrong), but it’s when you take sharp turns that will exhibit the high loads on the bolts.

Hope this gets resolved for both parties. Goodluck guys.

[merlinfe]

Jesus Guys,

This looks like a text message conversation between me and my soon to be ex-wife. Handle this stuff in email or PM.

OP please rename this thread or something so that innocent people aren't lulled in here thinking they're going to see pictures of "hella flush" stock wheels and then BLAM accusation war, its a bad tease.

997Turbo, you bought used parts. They come with a certain amount of risk. Sucks but its life. If you don't like it buy new parts from one of the vendors here on the site.


Have fun you two!!

[02themax]

It's the principle...

[bolty]

The pictures of the bolts the seller posted do no match the pictures posted by the buyer. The heads are different.

something stinks

[Chewy734]

Looks good! Those are my favorite oem wheels.

[lazie fo0]

Looks really good. This setup doesn't rub whatsoever?

[EmjayDavis]

Change the colour up .. grey looks off

[BFitty8]

Y’all still mad at each over a decade later or what?