[BeastMode335i]

Anybody happen to know where this clip goes..??? I've tried several lines and little hoses but can't for the life of me remember where it came off of, and I labeled everything except this piece..

Thank you!!

[Jeff@TopGearSolutions]

There are hard boost lines that hover over the valve cover.

That clips in underneath the boost lines to protect them from moving and rubbing on valve cover.

It's the 2 boost lines that go towards boost solenoids.

Send a picture when your done and i'll verify if you got it right.

Edit -



Ok so the area highlighted in red box is not the one you have in your hand.

There is a second set further down the line towards the turbo's in line with the coil packs.

[theweebabySeamus]

Originally Posted by BeastMode335i

Anybody happen to know where this clip goes..??? I've tried several lines and little hoses but can't for the life of me remember where it came off of, and I labeled everything except this piece..

Thank you!!

Good, you didn't do it right if you don't have extra parts.

[Lambobimmer]

The other solution is to trash those hard plastic boost lines and replace them with 3.5mm silicone vacuum lines.

[musc]

Originally Posted by theweebabySeamus

Good, you didn't do it right if you don't have extra parts.

+1

[BeastMode335i]

Lol yeah I knew I should have left it alone or something..

Thanks for ur feedback guys.. I thought about replacing all those lines with silicone hose but before I upgrade anything I want to make sure my initial problem is solved I suppose..

And Jeff@TopGearSolutions thanks brother I'll let you know once I get home today!