|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
How to reset tpms for 335i e92
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
01-06-2011, 10:47 AM | #2 |
Major General
124
Rep 5,627
Posts |
From my '07 manual with iDrive:
Resetting the system Each time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system. < iDrive, for operating principle refer to page 16. 1. Press the button The start menu is called up. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. If necessary, move the highlight marker to the uppermost field. Turn the controller until "TPM" is selected and press the controller. 6. Start the engine, but do not start driving. 7. Select "Reset" and press the controller. 8. Select "Yes" and press the controller. 9. Start to drive. The tires are shown in gray and "Resetting completed during your drive, and can be interwillTPM..." is displayed. After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be monitored. The system reset is And you can download your manual in pdf form here. http://www.bmwusa.com/standard/content/owner/dgh.aspx Tom |
Appreciate
0
|
Bookmarks |
|
|