RENNtech DCT 335is 12.0 ET 115 Mph 1.86 60'

BQTuning · 04-12-2012, 02:10 AM

Sorry about the noise in the car cam. camera arm was not tightened enough

GhostyM · 04-12-2012, 02:21 AM

Amazing. Did you turn down the psi from the tires? What tires? Also; I did the same thing you did at my local track. (Launch control at 3.5k) or did you do something else?

Alessandro · 04-12-2012, 08:29 AM

i am requesting a video how you do the LC with your car please do so

that is a fantastic ET with just tune and FMIC

my 60ft is killing me

Gunzaro · 04-12-2012, 08:32 AM

How do you even do the initial burn out with the DCT?

E90SoFlo · 04-12-2012, 08:41 AM

Great run, impressed by your 60'

You should also mention in your video's is a "IS" with the DCT.

cgom3z · 04-12-2012, 08:44 AM

Quote:

Originally Posted by E90SoFlo

Great run, impressed by your 60'

You should also mention in your video's is a "IS" with the DCT.

It has in the title: DCT 335is.

Lulz_M3 · 04-12-2012, 09:54 AM

You look like Vin Diesel with the single arm strong man grip. I'm not sure but i think you were texting with your right arm? I thought i saw you look down a few times.

marv85 · 04-12-2012, 09:58 AM

Very impressive time! and super clean launch. DCT is holding power nicely as well.
throw the DPs in already

Presidio335xi · 04-12-2012, 10:21 AM

What boost levels does Renntech run?

Also, I wish I could shift that fast =(

AU335i · 04-12-2012, 11:12 AM

damn such nice times!

EZ_TUR90 · 04-12-2012, 11:17 AM

Quote:

Originally Posted by Lulz_M3

You look like Vin Diesel with the single arm strong man grip. I'm not sure but i think you were texting with your right arm? I thought i saw you look down a few times.

Dont text and drive.

rader1 · 04-12-2012, 11:20 AM

Very good run, the DCT is helping out a lot. I wonder what a 6MT would run...

jpsimon · 04-12-2012, 11:57 AM

have you done any logs of any sort since going this route?

RambleJ · 04-12-2012, 12:31 PM

Quote:

Originally Posted by Presidio335xi

What boost levels does Renntech run?

Also, I wish I could shift that fast =(

I have been trying to figure this out for a while.. No response (or info not ready for release. Yet they have a tune for sale to the public.....

) , have basically given up..

BQTuning · 04-12-2012, 12:43 PM

Quote:

Originally Posted by Chipped B6

Amazing. Did you turn down the psi from the tires? What tires? Also; I did the same thing you did at my local track. (Launch control at 3.5k) or did you do something else?

I dropped the tire preasure to 30 psi. I am running Nitto NT555 235/35/19 front, 275/30/19 Rear

I use the kickdown to rev the RPMs into the 2500-3500 RPM range then back off the kickdown, release the brake, then apply the throttle again but not going pass the kick down so I can feather the launch.

The foot work is really quick

Quote:

Originally Posted by Alessandro

i am requesting a video how you do the LC with your car please do so

that is a fantastic ET with just tune and FMIC

my 60ft is killing me

Coming soon....but see if the above helps. You will have to play with it.

Quote:

Originally Posted by Gunzaro

How do you even do the initial burn out with the DCT?

There are two ways I can heat up the tires. Using the LC as I always do which is a minor burn out just to get moisture off the tires, or put the car into S-Mode, press to enable the Sport button, and disable the DSC completely, hold brake, press down pass the kick down, release the brake, RPMs will auto kick to 2500 and then the horse kick comes. This is done quickly

Quote:

Originally Posted by Lulz_M3

You look like Vin Diesel with the single arm strong man grip. I'm not sure but i think you were texting with your right arm? I thought i saw you look down a few times.

Haha...naa I was paranoid about Sport not being on, or DSC wanst on. Just kept double checking.

Quote:

Originally Posted by Presidio335xi

What boost levels does Renntech run?

Also, I wish I could shift that fast =(

At this time, RENNtech does not want me to disclose this info over the "internet". This is only a test tune for their Tune + FMIC stage for the 335is and perhaps the 335is N54

Quote:

Originally Posted by jpsimon

have you done any logs of any sort since going this route?

Not personally no, but I am ordering a DashDaq to be able to have this info.

BQTuning · 04-12-2012, 01:03 PM

Quote:

Originally Posted by RambleJ

I have been trying to figure this out for a while.. No response (or info not ready for release. Yet they have a tune for sale to the public.....

) , have basically given up..

LOL ! You shouldnt....the one they have available to the publinc if is for an all stock car

The test version I am using is their Tune + FMIC stage.

After I am done at this level, then car is goign to be returned for FMIC, Downpipes, and Intake which will be another stage.

BQTuning · 04-12-2012, 01:35 PM

Quote:

Originally Posted by marv85

Very impressive time! and super clean launch. DCT is holding power nicely as well.
throw the DPs in already

LMAO ! I am trying to squeeze as much as I can before getting DPs. We will see what an intake will do.

After adding DPs more than likely the car will get retuned

JB335 · 04-12-2012, 02:09 PM

Good shit

Dieselmd · 04-12-2012, 04:52 PM

11's are up next.

zerep1 · 04-12-2012, 05:21 PM

that dct really does give a .2 every shift

dlbrooks18 · 04-12-2012, 07:07 PM

Quote:

Originally Posted by zerep1

that dct really does give a .2 every shift

+1

Nice work, this tune has my interest for sure!

RnmEvo9 · 04-12-2012, 07:39 PM

Congrats Dimitri, custom tuning FTW! Can't wait to see how you do with downpipes.

04-12-2012, 02:10 AM	#1
BQTuning Banned 469 Rep 4,392 Posts Drives: 2012 Z4 sDrive35i M Sport 6MT Join Date: Nov 2010 Location: bq@bqtuning.com iTrader: (0)	RENNtech DCT 335is 12.0 ET 115 Mph 1.86 60' Sorry about the noise in the car cam. camera arm was not tightened enough Attached Images
	Appreciate 0 Tweet Quote

04-12-2012, 02:21 AM	#2
GhostyM Major 539 Rep 1,463 Posts Drives: plenty Join Date: Mar 2007 Location: US iTrader: (0)	Amazing. Did you turn down the psi from the tires? What tires? Also; I did the same thing you did at my local track. (Launch control at 3.5k) or did you do something else?
	Appreciate 0 Quote

04-12-2012, 08:29 AM	#3
Alessandro Major 109 Rep 1,043 Posts Drives: Audi RS5 Join Date: Mar 2008 Location: Canada iTrader: (8) Garage List 2011 335is [9.50]	i am requesting a video how you do the LC with your car please do so that is a fantastic ET with just tune and FMIC my 60ft is killing me __________________ 19 Audi RS5 15 Audi S5 GIAC Stage 2 white 11 E92 335is DCT FBO 441 whp silver 08 E92 335i FBO 6MT 427 whp space grey 05 E46 M3 red
	Appreciate 0 Quote

04-12-2012, 08:32 AM	#4
Gunzaro First Lieutenant 37 Rep 378 Posts Drives: Speed Racer Join Date: Jan 2011 Location: In transit iTrader: (0)	How do you even do the initial burn out with the DCT?
	Appreciate 0 Quote

04-12-2012, 08:41 AM	#5
E90SoFlo Banned 196 Rep 2,669 Posts Drives: E90 335i Join Date: Jun 2011 Location: Naples, FL iTrader: (9)	Great run, impressed by your 60' You should also mention in your video's is a "IS" with the DCT.
	Appreciate 0 Quote

04-12-2012, 09:54 AM	#7
Lulz_M3 Banned 33 Rep 1,029 Posts Drives: AW 335i 6MT Join Date: Oct 2011 Location: Jax, Fl iTrader: (0)	You look like Vin Diesel with the single arm strong man grip. I'm not sure but i think you were texting with your right arm? I thought i saw you look down a few times.
	Appreciate 0 Quote

04-12-2012, 09:58 AM	#8
marv85 Colonel 70 Rep 2,626 Posts Drives: '07 E92 335i MT Join Date: Jun 2010 Location: Bay Area iTrader: (7)	Very impressive time! and super clean launch. DCT is holding power nicely as well. throw the DPs in already __________________ '07 E92 335i 6MT- HP650, inlets/outlets, ER FMIC, VRSF CP, LPFP stg2, CSF rad, 'is Aux rad, ER OC, Ohlins, M control arms, eibach front sway bar. '05 C55 AMG SOLD - '22 Tesla M3P \| '10 E92 335i M, 6MT COBB, FBO, st2 LPFP, Mfactory LSD \| '07 E90 335i, PTF COBB E50, FBO, HFS4
	Appreciate 0 Quote

04-12-2012, 10:21 AM	#9
Presidio335xi Lieutenant 21 Rep 414 Posts Drives: 335xi coupe Join Date: Oct 2007 Location: San Francisco iTrader: (0)	What boost levels does Renntech run? Also, I wish I could shift that fast =( __________________ 2017 F82
	Appreciate 0 Quote

04-12-2012, 11:12 AM	#10
AU335i Captain 78 Rep 887 Posts Drives: 2008 335i E92 Join Date: Dec 2010 Location: Auburn, AL iTrader: (3)	damn such nice times!
	Appreciate 0 Quote

04-12-2012, 11:20 AM	#12
rader1 Banned 70 Rep 2,197 Posts Drives: Cobb Stage 2+ 135i Join Date: Apr 2011 Location: Roanoke, VA iTrader: (0)	Very good run, the DCT is helping out a lot. I wonder what a 6MT would run...
	Appreciate 0 Quote

04-12-2012, 11:57 AM	#13
jpsimon Team Zissou 3065 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	have you done any logs of any sort since going this route?
	Appreciate 0 Quote

04-12-2012, 02:09 PM	#18
JB335 Banned 33 Rep 1,034 Posts Drives: 335is Join Date: Aug 2008 Location: so cal iTrader: (1) Garage List 2011 BMW 335IS [7.60]	Good shit
	Appreciate 0 Quote

04-12-2012, 04:52 PM	#19
Dieselmd Private 9 Rep 95 Posts Drives: MW SO M4 DCT. EB M235i Join Date: Oct 2011 Location: United States iTrader: (1)	11's are up next.
	Appreciate 0 Quote

04-12-2012, 05:21 PM	#20
zerep1 Lieutenant 40 Rep 462 Posts Drives: 335i E90, 328i F30, 230i G42, Join Date: Nov 2010 Location: Tampa, Florida iTrader: (1)	that dct really does give a .2 every shift __________________ Irub
	Appreciate 0 Quote

04-12-2012, 07:39 PM	#22
RnmEvo9 Banned 247 Rep 1,827 Posts Drives: 2007 335i Join Date: Apr 2011 Location: Pembroke Pines, FL iTrader: (2)	Congrats Dimitri, custom tuning FTW! Can't wait to see how you do with downpipes.
	Appreciate 0 Quote