BSH Competition Oil Catch Can **FULL REVIEW/DIY**

335si · 04-07-2010, 09:25 PM

Quote:

Originally Posted by Rockstarr

Thanks, i feel better now.

I didn't get the clip with mine however I just did a slight mod using a small amount of 3/4" heater hose, 2 hose clamps and the stock blow-by connection.

I cut the stock plastic tubing off of the stock connection that attaches to the inlet then joined it to the BSH connector using the heater hose. Worked like a charm and I have no concerns that the hoses will come apart since I am using the stock connection.

Overall I am very happy with this OCC.

Very interested. Could you post up a picture?

Rockstarr · 04-08-2010, 04:38 AM

Will do however I won't have a chance to post the pics until the weekend.

I am sure you can pull both ends off the stock blow-by tubing as opposed to cutting the hose. I ended up snapping the inlet side the 1st time around so I had to order a new piece from Tischer ($30). I will post pics of the snapped piece as well.

Former_Boosted_IS · 04-08-2010, 05:14 AM

Quote:

Originally Posted by 335si

Well I couldn't wait to install so I made my own modifications and created my own clip using a drill, some aluminum stock (actually picked up a piece of gutter material at home depot for $0.79 and cut it up) and a screw that I cut using a dremel. Bent the aluminum gutter material to look like the one Former posted. How do you all think it looks?

For those that cannot wait, that does look very close to what I have.

BSH Speedshop · 04-13-2010, 01:47 PM

Just letting everyone know who sent in an email that we have responded to everyone with a couple of options for you. Thanks!

Just to be clear, ALL new kits shipped have this in them and will continue as such hence forth.

ModBargains.com · 04-13-2010, 02:37 PM

Quote:

Originally Posted by BSH Speedshop

Just letting everyone know who sent in an email that we have responded to everyone with a couple of options for you. Thanks!

Just to be clear, ALL new kits shipped have this in them and will continue as such hence forth.

For anyone who has placed an order through **********s.com and are concerned with this replacement piece please feel free to email me at Alan************.com!

BayerischeMW · 04-13-2010, 03:14 PM

Former_Boosted_IS: have you collected any blow-by oil in the can yet? enough to reach the dipstick?

Former_Boosted_IS · 04-14-2010, 07:33 AM

Quote:

Originally Posted by BayerischeMW

Former_Boosted_IS: have you collected any blow-by oil in the can yet? enough to reach the dipstick?

I haven't checked yet to be honest. The car was taken apart almost immediately after this was completed for some other mods. LOL.

ridin135 · 04-14-2010, 09:21 AM

Quote:

Originally Posted by Former_Boosted_IS

I haven't checked yet to be honest. The car was taken apart almost immediately after this was completed for some other mods. LOL.

What other mods?
Also I installed mine yesterday the can is very nice.

nonford · 04-14-2010, 10:54 AM

Quote:

Originally Posted by Former_Boosted_IS

I haven't checked yet to be honest. The car was taken apart almost immediately after this was completed for some other mods. LOL.

I've put about 200 miles on mine and the bottom of the can still doesnt have any oil?? Kind of surprised.

Former_Boosted_IS · 04-14-2010, 10:55 AM

Quote:

Originally Posted by ridin135

What other mods?
Also I installed mine yesterday the can is very nice.

Oh, just a couple of small things. I am not the teaser type.

BSH Speedshop · 04-21-2010, 11:44 AM

To the top.

shifterboy45 · 04-21-2010, 04:14 PM

Quote:

Originally Posted by nonford

I've put about 200 miles on mine and the bottom of the can still doesnt have any oil?? Kind of surprised.

ud expect that much blow by ???

ring sealing would be terrible and power would be non-existent ...

plus with heavy blow by -- to the magnitude ur talking about, youd have caked the intake valves and fouled some spark plugs --

id check in a few thousand miles, for a significant amount to build up -- if at all .. some cars have more blow by than others .. no real rule of thumb to measure by..

nonford · 04-22-2010, 09:46 AM

Quote:

Originally Posted by shifterboy45

ud expect that much blow by ???

ring sealing would be terrible and power would be non-existent ...

plus with heavy blow by -- to the magnitude ur talking about, youd have caked the intake valves and fouled some spark plugs --

id check in a few thousand miles, for a significant amount to build up -- if at all .. some cars have more blow by than others .. no real rule of thumb to measure by..

Nope. I thought at least a mist, but so far, 1300 miles and she is still clean. Which is great, and I agree that you really dont want excessive blow by building up as it it is telling you something isnt properly seated or wearing. Tell you the truth, i dont care if the can stays clean its entire life span.

Thanks

scottp999 · 05-04-2010, 02:39 PM

Quote:

Originally Posted by BSH Speedshop

To the top.

Got the updated part with the clip today. Already installed and sending the original back this afternoon or tomorrow morning. Thanks.

The catch can is very high quality, and I'm very happy with it.

ModBargains.com · 05-04-2010, 03:42 PM

Quote:

Originally Posted by scottp999

Got the updated part with the clip today. Already installed and sending the original back this afternoon or tomorrow morning. Thanks.

The catch can is very high quality, and I'm very happy with it.

Happy to hear that you are enjoying the BSH OCC and It's definitely a great choice! Just to let you guys know all of the BSH OCC units now come with the updated clips on the PVC adapters

Former_Boosted_IS · 05-05-2010, 04:50 AM

Quote:

Originally Posted by scottp999

Got the updated part with the clip today. Already installed and sending the original back this afternoon or tomorrow morning. Thanks.

The catch can is very high quality, and I'm very happy with it.

Nice! BSH is really a class operation. I am glad they got you taken care of.

Synergy 69 · 05-13-2010, 05:07 AM

Hey Former,

what's your take on the BSH vs RSD?

Former_Boosted_IS · 05-13-2010, 05:18 AM

Quote:

Originally Posted by Synergy 69

Hey Former,

what's your take on the BSH vs RSD?

Synergy, I have never seen or had the opportunity to review the RSD so it would not be fair for me to comment on it. I can tell you that the BSH Oil Catch Can is tremendously well constructed and I could imagine there would be a better OCC. I am not saying there aren't others of equal quality either. For me, I wouldn't change out by BSH at this point because the quality is there and the more I learn about BSH, the more I like them as a company. I think they will be a very good "get" for the N54 community.

SpanKyM3 · 05-13-2010, 08:04 AM

Is it only recommended for occ with a lot of mods?is a tune considered enough for a occ?

Yahoo · 05-13-2010, 08:12 AM

An OCC is recommended even stock - blow by is an issue on all N54 platforms and can have long term effects on the efficiency of the charge air cooling system.

Synergy 69 · 05-13-2010, 10:56 AM

thanks for the review and heads up!

Former_Boosted_IS · 05-14-2010, 06:08 AM

Quote:

Originally Posted by Synergy 69

thanks for the review and heads up!

For the price it is worth the safety. This car coats pipes fast with oil and there are tons of possible long term problems from that.

04-08-2010, 04:38 AM	#90
Rockstarr Private 3 Rep 78 Posts Drives: 2020 F33 440ix Join Date: Feb 2009 Location: NJ iTrader: (2)	Will do however I won't have a chance to post the pics until the weekend. I am sure you can pull both ends off the stock blow-by tubing as opposed to cutting the hose. I ended up snapping the inlet side the 1st time around so I had to order a new piece from Tischer ($30). I will post pics of the snapped piece as well.
	Appreciate 0 Quote

04-13-2010, 01:47 PM	#92
BSH Speedshop New Member 0 Rep 19 Posts Drives: All Turbo's Join Date: Jun 2009 Location: Speedshop, Az iTrader: (0)	Just letting everyone know who sent in an email that we have responded to everyone with a couple of options for you. Thanks! Just to be clear, ALL new kits shipped have this in them and will continue as such hence forth.
	Appreciate 0 Quote

04-13-2010, 03:14 PM	#94
BayerischeMW Man with No Name 22 Rep 441 Posts Drives: '07 E92 335i Join Date: Jan 2007 Location: Norway iTrader: (0)	Former_Boosted_IS: have you collected any blow-by oil in the can yet? enough to reach the dipstick? __________________ *E92 335i coupe March 2007*
	Appreciate 0 Quote

04-21-2010, 11:44 AM	#99
BSH Speedshop New Member 0 Rep 19 Posts Drives: All Turbo's Join Date: Jun 2009 Location: Speedshop, Az iTrader: (0)	To the top.
	Appreciate 0 Quote

05-13-2010, 05:07 AM	#105
Synergy 69 www.facebook.com/Synergy69 24 Rep 505 Posts Drives: AW E92 335I MT Join Date: Oct 2009 Location: TX iTrader: (1)	Hey Former, what's your take on the BSH vs RSD? __________________ Use caution when purchasing from Bmanny! http://www.e90post.com/forums/showthread.php?t=396267
	Appreciate 0 Quote

05-13-2010, 08:04 AM	#107
SpanKyM3 Private 3 Rep 60 Posts Drives: 335i Join Date: Aug 2008 Location: Location iTrader: (0)	Is it only recommended for occ with a lot of mods?is a tune considered enough for a occ?
	Appreciate 0 Quote

05-13-2010, 08:12 AM	#108
Yahoo Captain 42 Rep 822 Posts Drives: 335i e91 LCI msport Join Date: Jul 2007 Location: Lincolnshire iTrader: (3)	An OCC is recommended even stock - blow by is an issue on all N54 platforms and can have long term effects on the efficiency of the charge air cooling system.
	Appreciate 0 Quote

05-13-2010, 10:56 AM	#109
Synergy 69 www.facebook.com/Synergy69 24 Rep 505 Posts Drives: AW E92 335I MT Join Date: Oct 2009 Location: TX iTrader: (1)	thanks for the review and heads up! __________________ Use caution when purchasing from Bmanny! http://www.e90post.com/forums/showthread.php?t=396267
	Appreciate 0 Quote