Windows 64bit testers needed for PROcede software

OpenFlash · 06-02-2009, 03:48 PM

Hi guys,
I think we may have a solution for you Windows 64bit users. If you want to give it a try, email me at shiv@vishnutuning.com. Please put "Windows 64bit tester" in the subject line.
Cheers,
shiv

Slidewayz · 06-02-2009, 04:07 PM

Are there any new features or is this a straight port?

OpenFlash · 06-02-2009, 04:11 PM

Same exact software but just a different way to install it.

getInline · 06-02-2009, 04:23 PM

Sure would be nice to use my 64-bit Vista Tablet instead of my 17-inch, 42lb blast furnace of a laptop.

I suppose I could install XP on the tablet but that just smacks of effort.

Gen_E92 · 06-02-2009, 04:34 PM

email sent

yankis · 06-02-2009, 05:17 PM

email sent! I hope this works!!!

Ramos · 06-04-2009, 04:54 PM

Updates??

yankis · 06-04-2009, 05:22 PM

Good news! I have a 64-bit Vista Laptop and I followed Shivs instructions! I was able to hook up my car to the PROCEDE!!!

Thanks Shiv! Good work!

Ramos · 06-04-2009, 05:31 PM

That is good news... Anyone else try it? So how does it work if the software is the same according to Shiv?

jonm42 · 06-04-2009, 08:17 PM

Quote:

Originally Posted by got psi

Shiv, sorry for the offtopic post here...

Would you be interested in a software port to Mac OSX ?

I believe this is something i might be able to tackle. If interested, shoot me a PM and we'll discuss it.

+1

godot · 06-04-2009, 08:25 PM

Quote:

Originally Posted by Ramos

That is good news... Anyone else try it? So how does it work if the software is the same according to Shiv?

It also worked for me with Vista 64.

I think the problems are with the installer rather than the software itself. We just ran the software without doing an actual install.

Not sure what the plan is going forward.

Longbow64 · 06-04-2009, 08:56 PM

Awesome news!

OpenFlash · 06-04-2009, 11:09 PM

Quote:

Originally Posted by godot

It also worked for me with Vista 64.

I think the problems are with the installer rather than the software itself. We just ran the software without doing an actual install.

Not sure what the plan is going forward.

Simple... I'm just going to make the software downloadable from our site. All you will need to do is save it to your HD and run the program. No installation shield. Very simple.

Gen_E92 · 06-05-2009, 02:21 AM

Oh well the software does work...but there's no 64bit driver for my USB cable

, did you guys have to install a 64bit driver for the cable to work?

mwahlert · 06-05-2009, 08:41 AM

Quote:

Originally Posted by getInline

Sure would be nice to use my 64-bit Vista Tablet instead of my 17-inch, 42lb blast furnace of a laptop.

I suppose I could install XP on the tablet but that just smacks of effort.

lmao

Slidewayz · 06-05-2009, 11:06 AM

There's a chance your 32 bit driver will work in Vista compatibility mode. Have you tried it?

Quote:

Originally Posted by Gen_E92

Oh well the software does work...but there's no 64bit driver for my USB cable

, did you guys have to install a 64bit driver for the cable to work?

Ramos · 06-05-2009, 11:19 AM

We need our testers to test connecting to the Procede not just running the software.

OpenFlash · 06-05-2009, 01:17 PM

Quote:

Originally Posted by Gen_E92

Oh well the software does work...but there's no 64bit driver for my USB cable

, did you guys have to install a 64bit driver for the cable to work?

We used the radio shack cable with it's own drivers and it worked just fine.

Shiv

Soni · 06-05-2009, 01:21 PM

Quote:

Originally Posted by shiv@vishnu

We used the radio shack cable with it's own drivers and it worked just fine.

Shiv

My Radio Shack drivers doesn't work on my VISTA laptop

I remember reading a threads few months ago that you need to run another drivers in order to get the USB work on VISTA...now I couldn't found the thread

Slidewayz · 06-05-2009, 01:33 PM

I use this serial to USB connector: http://www.centralcomputers.com/comm...=1244225782343

$15.95, works perfect, and is Vista-compatible.

Gen_E92 · 06-05-2009, 02:57 PM

Quote:

Originally Posted by Slidewayz

There's a chance your 32 bit driver will work in Vista compatibility mode. Have you tried it?

that sounds like a good idea...will let you guys know after I try it!

godot · 06-05-2009, 06:44 PM

Quote:

Originally Posted by Ramos

We need our testers to test connecting to the Procede not just running the software.

It has been stated that people have connected to the Procede.

Quote:

Originally Posted by Soni

My Radio Shack drivers doesn't work on my VISTA laptop

I remember reading a threads few months ago that you need to run another drivers in order to get the USB work on VISTA...now I couldn't found the thread

I found the thread, but it involved going to a web site that no longer exists.

However, I just found ANOTHER web page that says the Radio Shack 26-183 cable uses the Prolific PL2303 chipset. If that's true, you should be able to download and use the latest driver directly from Prolific, here: http://www.prolific.com.tw/eng/downloads.asp?ID=31

Quote:

Originally Posted by Slidewayz

I use this serial to USB connector: http://www.centralcomputers.com/comm...=1244225782343

$15.95, works perfect, and is Vista-compatible.

I use an $18 TrendNet cable from Amazon that is Vista64 compatible. I downloaded the latest driver from TrendNet's web site, after which it worked like a champ.

06-02-2009, 03:48 PM	#1
OpenFlash 1736 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Windows 64bit testers needed for PROcede software Hi guys, I think we may have a solution for you Windows 64bit users. If you want to give it a try, email me at shiv@vishnutuning.com. Please put "Windows 64bit tester" in the subject line. Cheers, shiv
	Appreciate 0 Tweet Quote

06-02-2009, 04:07 PM	#2
Slidewayz Major 33 Rep 1,177 Posts Drives: 2007 335i Join Date: Jan 2009 Location: Oakland, CA iTrader: (5)	Are there any new features or is this a straight port?
	Appreciate 0 Quote

06-02-2009, 04:11 PM	#3
OpenFlash 1736 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Same exact software but just a different way to install it.
	Appreciate 0 Quote

06-02-2009, 04:23 PM	#4
getInline Lieutenant 12 Rep 412 Posts Drives: 2008 335 Coupe, c32 AMG Join Date: Nov 2007 Location: Parts Unknown iTrader: (1)	Sure would be nice to use my 64-bit Vista Tablet instead of my 17-inch, 42lb blast furnace of a laptop. I suppose I could install XP on the tablet but that just smacks of effort.
	Appreciate 0 Quote

06-02-2009, 04:34 PM	#5
Gen_E92 Brigadier General 118 Rep 3,432 Posts Drives: slow Join Date: Oct 2006 Location: Vancouver iTrader: (17) Garage List 2007 335i [7.80]	email sent
	Appreciate 0 Quote

06-02-2009, 05:17 PM	#6
yankis Freelance Photographer 40 Rep 301 Posts Drives: MW E93 M3 Join Date: Oct 2006 Location: Miami iTrader: (0)	email sent! I hope this works!!!
	Appreciate 0 Quote

06-04-2009, 04:54 PM	#7
Ramos Colonel 861 Rep 2,896 Posts Drives: G20 2020 M340 Join Date: Nov 2007 Location: So-Cal iTrader: (6)	Updates??
	Appreciate 0 Quote

06-04-2009, 05:22 PM	#8
yankis Freelance Photographer 40 Rep 301 Posts Drives: MW E93 M3 Join Date: Oct 2006 Location: Miami iTrader: (0)	Good news! I have a 64-bit Vista Laptop and I followed Shivs instructions! I was able to hook up my car to the PROCEDE!!! Thanks Shiv! Good work!
	Appreciate 0 Quote

06-04-2009, 05:31 PM	#9
Ramos Colonel 861 Rep 2,896 Posts Drives: G20 2020 M340 Join Date: Nov 2007 Location: So-Cal iTrader: (6)	That is good news... Anyone else try it? So how does it work if the software is the same according to Shiv?
	Appreciate 0 Quote

06-04-2009, 08:56 PM	#12
Longbow64 _______ 169 Rep 1,088 Posts Drives: 15 M3, 13 X3 35i MSport Join Date: Apr 2008 Location: Orlando iTrader: (4)	Awesome news!
	Appreciate 0 Quote

06-05-2009, 02:21 AM	#14
Gen_E92 Brigadier General 118 Rep 3,432 Posts Drives: slow Join Date: Oct 2006 Location: Vancouver iTrader: (17) Garage List 2007 335i [7.80]	Oh well the software does work...but there's no 64bit driver for my USB cable , did you guys have to install a 64bit driver for the cable to work?
	Appreciate 0 Quote

06-05-2009, 11:19 AM	#17
Ramos Colonel 861 Rep 2,896 Posts Drives: G20 2020 M340 Join Date: Nov 2007 Location: So-Cal iTrader: (6)	We need our testers to test connecting to the Procede not just running the software.
	Appreciate 0 Quote

06-05-2009, 01:33 PM	#20
Slidewayz Major 33 Rep 1,177 Posts Drives: 2007 335i Join Date: Jan 2009 Location: Oakland, CA iTrader: (5)	I use this serial to USB connector: http://www.centralcomputers.com/comm...=1244225782343 $15.95, works perfect, and is Vista-compatible.
	Appreciate 0 Quote