[JDrago1926]

Any idea why that error is showing?

[BD_F22]

Originally Posted by JDrago1926

Any idea why that error is showing?

Check the connection on the tablet and obd port.. Unplug it and try again and i got a message asking me if i drive a 135 make sure you click no

[akotten]

Will this new version fix my updating issue? And my corrupted protocol file?

[Msport335]

Shiv,

all is good now after the new updates ....boost guage working as it should

[n54door]

Originally Posted by Msport335

Shiv,

all is good now after the new updates ....boost guage working as it should

Quick question, will the boost gauge hack still work if the tablet is not plugged in you set it?

[Msport335]

Originally Posted by n54door

Quick question, will the boost gauge hack still work if the tablet is not plugged in you set it?

actually didn't try that but i highly doubt it....i beleive the tablet will still need to be plugged into the OBD port in order for the fuel/boost guage to work.

[BD_F22]

Originally Posted by n54door

Quick question, will the boost gauge hack still work if the tablet is not plugged in you set it?

It wont work unplugged, as soon as i unplug the tablet the fuel gauge goes back to normal

[akotten]

Originally Posted by #teambimmer

It wont work unplugged, as soon as i unplug the tablet the fuel gauge goes back to normal

Will it immediately return as soon as its plugged back in? Or does it need to be switched on again?

[BD_F22]

Originally Posted by akotten

Will it immediately return as soon as its plugged back in? Or does it need to be switched on again?

It has to be switched back on

[JDrago1926]

Originally Posted by #teambimmer

Check the connection on the tablet and obd port.. Unplug it and try again and i got a message asking me if i drive a 135 make sure you click no

I got that as well and did click no.... I re-downloaded OFM and the template file.. will update here shortly.

[JDrago1926]

I'm still having the issue with the "In Dash Boost Gauges" I updated the tablet two separate times manually with the template 2 upgrade as well as manually re-downloading the v.1.02 or whatever Open Flash Manager.... I am getting the following error after enabling dash gauges.. it takes about 15-30 seconds to come up after viewing the realtime data display "Sorry operation failed, please quit"

[OpenFlash]

Originally Posted by #teambimmer

Check the connection on the tablet and obd port.. Unplug it and try again and i got a message asking me if i drive a 135 make sure you click no

+1
Another cause for that error message is running another canbus device at the same time.

[OpenFlash]

Originally Posted by akotten

Will this new version fix my updating issue? And my corrupted protocol file?

Definitely update to the new files/applications posted on our website.

[BD_F22]

Originally Posted by JDrago1926

I'm still having the issue with the "In Dash Boost Gauges" I updated the tablet two separate times manually with the template 2 upgrade as well as manually re-downloading the v.1.02 or whatever Open Flash Manager.... I am getting the following error after enabling dash gauges.. it takes about 15-30 seconds to come up after viewing the realtime data display "Sorry operation failed, please quit"

The next step i would take if i were you is completely uninstall openflash manager software on your computer and then start fresh by downloading the v.1.02 off the vishnu website so you know you definitely have the correct updated version and then after its downloaded start up openflash manager and then plug your device in and update to template 2 and try to reconnect to the car

[Dmacc]

Originally Posted by akotten

Will this new version fix my updating issue? And my corrupted protocol file?

I was getting this message before, what computer are you running? I was using parallels on my MacBook and it would always lose connection with the tablet halfway through the update process, which would corrupt my protocol file. I ended up using someone else's PC and the update worked no problem and haven't got that message since.

[JDrago1926]

Originally Posted by #teambimmer

The next step i would take if i were you is completely uninstall openflash manager software on your computer and then start fresh by downloading the v.1.02 off the vishnu website so you know you definitely have the correct updated version and then after its downloaded start up openflash manager and then plug your device in and update to template 2 and try to reconnect to the car

I uninstalled and have now downloaded v.1.02 off the vishnu website and upgraded to template 2. I am still getting the same error

[OpenFlash]

Originally Posted by JDrago1926

I uninstalled and have now downloaded v.1.02 off the vishnu website and upgraded to template 2. I am still getting the same error

At this point, I would try doing the update on another laptop.

[BD_F22]

Originally Posted by shiv@vishnu

At this point, I would try doing the update on another laptop.

+1 are you using a pc or mac?

[JDrago1926]

Originally Posted by shiv@vishnu

At this point, I would try doing the update on another laptop.

Originally Posted by #teambimmer

+1 are you using a pc or mac?

I don't have another laptop, this is a brand new laptop with Windows 8...

http://imageshack.us/photo/my-images/11/zlbg.png/

[OpenFlash]

Originally Posted by JDrago1926

I don't have another laptop, this is a brand new laptop with Windows 8...

http://imageshack.us/photo/my-images/11/zlbg.png/

You don't need a laptop. Even a desktop computer with a wifi connection will work.

[Alessandro]

Originally Posted by JDrago1926

I don't have another laptop, this is a brand new laptop with Windows 8...

http://imageshack.us/photo/my-images/11/zlbg.png/

maybe a long shot but check your firewall settings disable and try again.

[JDrago1926]

Originally Posted by #teambimmer

+1 are you using a pc or mac?

Originally Posted by shiv@vishnu

You don't need a laptop. Even a desktop computer with a wifi connection will work.

My desktop is old and outdated, it wouldn't even run this... can someone try connecting to my computer and helping?