10.5 ET20 Rear - 275/30/19 ? on E90 , anyone run this before ?

nsyberg · 03-08-2013, 12:45 AM

Have a set of Varrstoen 9.5 and 10.5 going onto an E90 with mild drop. Has anyone run a 10.5 ET20 with a 275/30/19 ? They recommend the 265/30/19 but I like the 275 for the height due to the mild drop [H&R's springs, not the race]

Rolling and pulling is in order and wondering if the 275 will be a touch too much ?

Thanks much

BMVeh · 03-08-2013, 12:53 AM

ill be doing something similar to this here soon.. however im on the race springs and not sport... 9.5 and 10.5 but ill def be stretching tires...275 might rub for you tho..

07tundra · 03-08-2013, 07:56 AM

I run a 265 et 22 on kv2 and if I have the kids in the back( highschool kids) they rub very little on a huge dip . I think it will depend on your offset

#Tee · 03-08-2013, 07:59 AM

im also running 275.30 rears

napeHbNYC · 05-02-2013, 06:41 PM

^^ what offset?

edirtaynine · 05-02-2013, 07:42 PM

Quote:

Originally Posted by nsyberg

Have a set of Varrstoen 9.5 and 10.5 going onto an E90 with mild drop. Has anyone run a 10.5 ET20 with a 275/30/19 ? They recommend the 265/30/19 but I like the 275 for the height due to the mild drop [H&R's springs, not the race]

Rolling and pulling is in order and wondering if the 275 will be a touch too much ?

Thanks much

after you roll the fenders, youre ok with the pre-lci e90.

#Tee · 05-02-2013, 07:47 PM

Quote:

Originally Posted by napeHbNYC

^^ what offset?

+27

Projekt_BooGie · 05-02-2013, 10:35 PM

wow I didn't know that...what are you sizes again?

napeHbNYC · 05-02-2013, 10:43 PM

Quote:

Originally Posted by ~XxTeexX~

+27

Will these offset work on e90'lci?

#Tee · 05-02-2013, 11:58 PM

Quote:

Originally Posted by napeHbNYC

Will these offset work on e90'lci?

pends on the width, offset is just fine tuning.

napeHbNYC · 05-03-2013, 10:39 PM

I am looking to go 10.5 in the rear with Miro 111 if they make that size, looking for the offset to fit on my e90 lci. Thank you btw.

DC_Oldboy · 05-04-2013, 01:10 AM

Quote:

Originally Posted by nsyberg

Have a set of Varrstoen 9.5 and 10.5 going onto an E90 with mild drop. Has anyone run a 10.5 ET20 with a 275/30/19 ? They recommend the 265/30/19 but I like the 275 for the height due to the mild drop [H&R's springs, not the race]

Rolling and pulling is in order and wondering if the 275 will be a touch too much ?

Thanks much

Yeah I would stick with 265/30. It will only be a slight stretch.

robc1976 · 05-04-2013, 02:28 PM

Quote:

Originally Posted by edirtaynine

after you roll the fenders, youre ok with the pre-lci e90.

you can fit big meaty tires on a pre-LCI...I have 295's....thinking of going to 305's.

#Tee · 05-04-2013, 05:31 PM

Quote:

Originally Posted by napeHbNYC

I am looking to go 10.5 in the rear with Miro 111 if they make that size, looking for the offset to fit on my e90 lci. Thank you btw.

so 10.5 +27 on lci e90? 255.30 /w roll on hnr -2.0

corrected typo

hawaiianeze · 05-06-2013, 12:05 AM

H&R springs with an aggressive wheel setup is no bueno

starbai · 08-02-2013, 08:23 AM

Quote:

Originally Posted by #Tee

so 10.5 +27 on lci e90? 255.50 /w roll on hnr -2.0

how'd this work out?

deathbunny · 08-03-2013, 04:17 PM

Quote:

Originally Posted by robc1976

you can fit big meaty tires on a pre-LCI...I have 295's....thinking of going to 305's.

Do you mind sharing your wheel / tire specs for those and anything additional you needed to do to get those to fit if any? I would love to run some 305, 295 would even be a huge improvement.

Thanks!

kevobmw335 · 08-04-2013, 08:42 AM

I am running a set of Varrstoen wheels they are 19X9.5 front and 19X10.5 in the rear and all i needed to do was roll my fenders and give the car a little negative camber, also I installed H&R springs but just in the front on the car because the car is low enough in the rear end; here are some pictures...

hailpersia · 08-04-2013, 12:33 PM

Quote:

Originally Posted by kevobmw335

I am running a set of Varrstoen wheels they are 19X9.5 front and 19X10.5 in the rear and all i needed to do was roll my fenders and give the car a little negative camber, also I installed H&R springs but just in the front on the car because the car is low enough in the rear end; here are some pictures...

this actually looks really good.

robc1976 · 08-05-2013, 02:29 AM

Quote:

Originally Posted by deathbunny

Do you mind sharing your wheel / tire specs for those and anything additional you needed to do to get those to fit if any? I would love to run some 305, 295 would even be a huge improvement.

Thanks!

Sure, 42 offset with 10MM spacer (so 32 offset). I shaved the fenders and modified the rear quarter panel plastic piece (where quarter panel and bumper meet).

03-08-2013, 12:45 AM	#1
nsyberg Registered 2 Rep 1 Posts Drives: 2006 330i Join Date: Mar 2013 Location: north america iTrader: (0)	10.5 ET20 Rear - 275/30/19 ? on E90 , anyone run this before ? Have a set of Varrstoen 9.5 and 10.5 going onto an E90 with mild drop. Has anyone run a 10.5 ET20 with a 275/30/19 ? They recommend the 265/30/19 but I like the 275 for the height due to the mild drop [H&R's springs, not the race] Rolling and pulling is in order and wondering if the 275 will be a touch too much ? Thanks much
	Appreciate 0 Tweet Quote

03-08-2013, 12:53 AM	#2
BMVeh First Lieutenant 31 Rep 365 Posts Drives: 2006 330i Join Date: Apr 2012 Location: Tampa, FL iTrader: (4)	ill be doing something similar to this here soon.. however im on the race springs and not sport... 9.5 and 10.5 but ill def be stretching tires...275 might rub for you tho.. __________________ 06 330i SGM
	Appreciate 0 Quote

03-08-2013, 07:56 AM	#3
07tundra Lieutenant Colonel 119 Rep 1,525 Posts Drives: 8.1L Chevy 2500hd Join Date: Jan 2012 Location: New Mexico iTrader: (9)	fitment I run a 265 et 22 on kv2 and if I have the kids in the back( highschool kids) they rub very little on a huge dip . I think it will depend on your offset
	Appreciate 0 Quote

03-08-2013, 07:59 AM	#4
#Tee Major General 557 Rep 5,367 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	im also running 275.30 rears __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote

05-02-2013, 06:41 PM	#5
napeHbNYC Captain 234 Rep 990 Posts Drives: 2007 e60 550i RWD 6MT Join Date: Feb 2013 Location: NY,NY iTrader: (7)	^^ what offset?
	Appreciate 0 Quote

05-02-2013, 10:35 PM	#8
Projekt_BooGie Average Car Exceeding Expectations (ACEE) 358 Rep 4,806 Posts Drives: 2007 335i e92 Join Date: Nov 2010 Location: Home random floods and Cajun Navy iTrader: (9) Garage List 2007 e92 [7.00]	wow I didn't know that...what are you sizes again? __________________ too much to list...just know its wide and bagged
	Appreciate 0 Quote

05-03-2013, 10:39 PM	#11
napeHbNYC Captain 234 Rep 990 Posts Drives: 2007 e60 550i RWD 6MT Join Date: Feb 2013 Location: NY,NY iTrader: (7)	I am looking to go 10.5 in the rear with Miro 111 if they make that size, looking for the offset to fit on my e90 lci. Thank you btw. __________________ 2010 Alpine White E90 335i RWD 6MT M/Premium/Cold
	Appreciate 0 Quote

05-06-2013, 12:05 AM	#15
hawaiianeze Major Pain 162 Rep 1,260 Posts Drives: LCI E92 335i Join Date: Mar 2012 Location: Los Angeles iTrader: (0)	H&R springs with an aggressive wheel setup is no bueno __________________
	Appreciate 0 Quote

08-04-2013, 08:42 AM	#18
kevobmw335 Enlisted Member 4 Rep 36 Posts Drives: 335i Brushed Titanium Wrapped Join Date: Oct 2012 Location: Puerto Rico iTrader: (0)	I am running a set of Varrstoen wheels they are 19X9.5 front and 19X10.5 in the rear and all i needed to do was roll my fenders and give the car a little negative camber, also I installed H&R springs but just in the front on the car because the car is low enough in the rear end; here are some pictures... Attached Images
	Appreciate 0 Quote