[GSEN820]

two weeks...Im out of town next week

[Gumball335]

I'm down for a meet this week, next week, whenever.

[hp jnkey]

Originally Posted by taylors335

im in for a local meet next week if anyone else wants too

Mason, you heading to HRE next weekend?

[Bimmer335i]

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

[vertspeed]

I was just contemplating doing the same thing myself. While getting my car smogged last week at Bright Tech Auto here in Santee I asked the guy and he said he would just charge me like $20 if I brought all the materials. David Tran - His #619-449-0741

[Bimmer335i]

Originally Posted by vertspeed

I was just contemplating doing the same thing myself. While getting my car smogged last week at Bright Tech Auto here in Santee I asked the guy and he said he would just charge me like $20 if I brought all the materials. David Tran - His #619-449-0741

Vertspeed, thanks for the info. I'll give David a call.

[itsyawn]

Can I borrow someones USB cable for a jb4? I think I have a bad cable that's preventing me from connecting to a laptop. I'm trying to update the jb4 g4 board. I am located in Mira Mesa.

[SagaSupra]

Originally Posted by Bimmer335i

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

If you decide to diy, and you are still having issues getting your car on a lift, you can always try driving your car on a couple sheets of wood. That should give you a few inches

[Jeef]

Originally Posted by itsyawn

Can I borrow someones USB cable for a jb4? I think I have a bad cable that's preventing me from connecting to a laptop. I'm trying to update the jb4 g4 board. I am located in Mira Mesa.

Is there an error message? Did you set up the com port?

Originally Posted by Bimmer335i

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

We can do this for you! You need more than oil and an oil filter by the way

[Bimmer335i]

Originally Posted by Jeef

Is there an error message? Did you set up the com port?



We can do this for you! You need more than oil and an oil filter by the way

Hahaha..you know I can do the change myself, done it before, but I guess it doesn't hurt to make friends over a 6-pack or something like that..so where can I bring my car to?

[itsyawn]

Originally Posted by Jeef

Is there an error message? Did you set up the com port?



We can do this for you! You need more than oil and an oil filter by the way

Yes I tried changing the com port and all that. My car went into limp mode.

[deluxe 247]

lookin to get back into a 335i, anyone see a good deal recently?

[Mikkors]

Lets shoot for Tuesday June 17th 7pm for a meet. Maybe meet in Liberty Station. Slater's 50/50?????

June 17th 7pm
Slater's 50/50
Liberty Station

List of people going!!!!!

1. Mikkors

[Schmidty335i]

itsyawn, i have a JB4 usb cable that you can borrow but I live in spring valley and wont be back till saturday.

[Jeef]

Originally Posted by itsyawn

Yes I tried changing the com port and all that. My car went into limp mode.

Limp mode... Check your jb4 wires

[Dmon335]

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

[Jeef]

Originally Posted by Dmon335

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

We are not an Indy shop. Will you let us do it? If not I understand.

[GSEN820]

^^^ Let JEEF do the work...He is really good knows what he is doing....He did my work and will doing more with me in the future....

[Gumball335]

Originally Posted by Dmon335

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

theres "bimmerspeed" in san diego and "dosebmw" in el cajon. both very good shops, but im willing to bet bimmerspeed is a bit cheaper.

[khaye1]

If anybody is in the mood for some bomb ass sandwiches, you guys need to peep supernatural sandwiches on miramar rd. If I'm recommending it, it's good! Super friendly staff too...the co-owner, tony, super nice guy.

What up Peeps,
New to the forum and the 335I community. This is my first euro car so I am excited to see how this project goes.... anyone in the North San Diego area?

I can try and get you a good deal on one. PM me.