[themyst]

Originally Posted by NjRep335i

I went to Yosolo tuning in NJ when I dyno'd my car. I was the only one there and I must have gotten 9 runs for 100 bux. I'm sure this doesn't happen all the time but Eric was really cool and let me operate the dyno and do what ever I needed. I put down 386whp,416lb on tune, DCI, meth. Kinda expected a bit more but conditions weren't ideal. I might make another trip after my vacation, with the new E85 maps and Down Pipes.

I did the method Bryce was explaining. Baseline was 276hp and 292lb.

i did 277 whp baseline and made 406 whp with FBO + meth on Cobb's alpha race map. Folks, see what a baseline can show us?

[jippii ensio]

Is this a trick question

[NjRep335i]

Originally Posted by benzy89

Where's Yosolo, never heard of them?

Garwood NJ, next to 1320 Racing.They tune Honda's and EVO's usually and they have a dynojet of course.

[secretsquirrel]

Originally Posted by NjRep335i

I went to Yosolo tuning in NJ when I dyno'd my car. I was the only one there and I must have gotten 9 runs for 100 bux. I'm sure this doesn't happen all the time but Eric was really cool and let me operate the dyno and do what ever I needed. I put down 386whp,416lb on tune, DCI, meth. Kinda expected a bit more but conditions weren't ideal. I might make another trip after my vacation, with the new E85 maps and Down Pipes.

I did the method Bryce was explaining. Baseline was 276hp and 292lb.

A delta of 140hp is nothing to sneeze at!

[benzy89]

Originally Posted by NjRep335i

Garwood NJ, next to 1320 Racing.They tune Honda's and EVO's usually and they have a dynojet of course.

Let me know when you go -- Garwoods not far far from me & if they have a good dyno price I could go for some pulls. I've been running the COBB Stg 2+ maps, but want to log on Aggressive & would like to get dyno #s at the same time.

[themyst]

Originally Posted by secretsquirrel

A delta of 140hp is nothing to sneeze at!

It's a 110 whp delta.

[NjRep335i]

Originally Posted by benzy89

Let me know when you go -- Garwoods not far far from me & if they have a good dyno price I could go for some pulls. I've been running the COBB Stg 2+ maps, but want to log on Aggressive & would like to get dyno #s at the same time.

No doubt, gotta clean my valves and some other small maintenance I.E. move meth tank to trunk. LOL So I'm thinking maybe around the 4th of July week since I'm on vacation. Does that work for you?

[benzy89]

Originally Posted by NjRep335i

No doubt, gotta clean my valves and some other small maintenance I.E. move meth tank to trunk. LOL So I'm thinking maybe around the 4th of July week since I'm on vacation. Does that work for you?

That'd be perfect, by then I'll have my new DPs in & some necessary evil maintenance done -- head gasket needs to get replaced + an oil change

[STONEY_M5]

Originally Posted by bryce

lol that 400whp dinan dyno will be 600whp rb turbo's

Lets hope so....

Originally Posted by bryce

lol we were never saying it was a 600whp dyno. it could very well only be 465 on a different dyno. without a baseline, we don't really know how his car is running.


why don't you go congratulate the 400whp dinan stage 2 car? lol

Why??? Im grown and definitely don't need it, You can congratulate my oldest son on his commencement to 3rd grade and all A's on his report card tho...

Originally Posted by benzy89

Same dyno means your car should be pumping out ~750 WHP then

Give or take 1 or 2 hp.

Originally Posted by themyst

LMAO if that happened Shiv would have to change his sig

Originally Posted by themyst

I'll be dynoing on 90/10 and 93 octane only.

Originally Posted by themyst

+1 if the baseline is 280 whp with bolt-ons on stock tune, those numbers are amazing. if the baseline is 320 whp, those numbers aren't all that great.

I'm going to that same dyno the 400whp Dinan guy went to when I get my car back from the body shop. Acid damage

When you do dyno try to get a run in with no meth, if you can...

[mrbillytalent]

D-D-D-D-D-Drop the Base (line)
bayer nayer
wub wub wub wub wub wub wub wub wub

[NjRep335i]

Originally Posted by benzy89

That'd be perfect, by then I'll have my new DPs in & some necessary evil maintenance done -- head gasket needs to get replaced + an oil change

Head gasket? Doesn't sound like fun, did you just notice some leaking or mixture of oil and antifreeze?

[benzy89]

Originally Posted by NjRep335i

Head gasket? Doesn't sound like fun, did you just notice some leaking or mixture of oil and antifreeze?

It's not bad -- Changed the plugs out b/c I was getting misfires, 1 plug (cylinder 3) had oil on it. Just changing it now to avoid a big headache later.

Originally Posted by mrbillytalent

D-D-D-D-D-Drop the Base (line)
bayer nayer
wub wub wub wub wub wub wub wub wub

All about that Skrillex remix

[themyst]

Originally Posted by benzy89

It's not bad -- Changed the plugs out b/c I was getting misfires, 1 plug (cylinder 3) had oil on it. Just changing it now to avoid a big headache later.

That's a valve cover gasket not a head gasket.

[benzy89]

Originally Posted by themyst

That's a valve cover gasket not a head gasket.

You are correct sir, just saw the typo

[mrbillytalent]

I was afraid no one would pick up on that...
thanks benzy.

[benzy89]

Haha no problem, took a little while to find a good picture

[benzy89]

Originally Posted by NjRep335i

No doubt, gotta clean my valves and some other small maintenance I.E. move meth tank to trunk. LOL So I'm thinking maybe around the 4th of July week since I'm on vacation. Does that work for you?

Giving this a bump just to see if you're still planning on going that weekend & to remind myself

[nkadisha]

Love that powerband! Great numbers

[STONEY_M5]

Originally Posted by themyst

That's a valve cover gasket not a head gasket.

did you ever go dyno your car???