This is cool, might try this soon with my 330 (FRM1)

[sono0312]

Originally Posted by *************

this to aktiv:
BFD_1_ALGORITHMUS

this to wert01
BFD_1_MIT_NSL

thanks, it is good to know
you mean BFD1 should be activated as basic function of BFD?
so BFD1 (active and rear-fog) +BFD2 (rear-brake, rear-fog,third-brake) should be activated at the same time?

[joepcrepairs2]

Originally Posted by sono0312

thanks, it is good to know
you mean BFD1 should be activated as basic function of BFD?
so BFD1 (active and rear-fog) +BFD2 (rear-brake, rear-fog,third-brake) should be activated at the same time?

yes

[sono0312]

Originally Posted by *************

yes

I have just tried it around three times with your additional instruction for bfd_1; however it was not possible to get BFD function as expected...

I braked heavily to feel that abs was reacted to make it happen but unfortunately not...

Any missing setting in the coding?

[joepcrepairs2]

Originally Posted by sono0312

I have just tried it around three times with your additional instruction for bfd_1; however it was not possible to get BFD function as expected...

I braked heavily to feel that abs was reacted to make it happen but unfortunately not...

Any missing setting in the coding?

I was able to make it work on fmr1 should be easier for frm2...

ill double check your frm.trc file again in a bit

[sono0312]

Originally Posted by cuco

I updated my NFRM (FRM2) per ******84's TRC codes and it works. Fog lights come on and all three stoplights blink! Only thing I did differently is I also added $5AB to my VO.
[u2b]

[/u2b]

My car e90 325i has frm2 embedded.

I confirmed that my vo includes $5AB but no luck to have BFD activated so it should be ok for vo value. Can you post your trc so that I can compare it with my trc?

[joepcrepairs2]

Originally Posted by sono0312

My car e90 325i has frm2 embedded.

I confirmed that my vo includes $5AB but no luck to have BFD activated so it should be ok for vo value. Can you post your trc so that I can compare it with my trc?

go too page 3 on on this theat I thinknis post # 114 Iuploaded my trc file and my daten file as well go checknit out

[cuco]

Originally Posted by sono0312

My car e90 325i has frm2 embedded.

I confirmed that my vo includes $5AB but no luck to have BFD activated so it should be ok for vo value. Can you post your trc so that I can compare it with my trc?

Yeah, read post #66 and/or try joespcrep's trc (post #114). I'll try and grab a hold of my trc later, currently having inpa/ncs issues on my laptop.

[DUI Elite]

Having only the rear fog lights flashing is not possible to do on NFRM?

[joepcrepairs2]

Originally Posted by DUI Elite

Having only the rear fog lights flashing is not possible to do on NFRM?

has to be. I was able to fugure it out on frm1 why not frm2?

[sono0312]

i would appreciate if someone has a trc file of which bfd was a success with frm2...

[joepcrepairs2]

Originally Posted by sono0312

i would appreciate if someone has a trc file of which bfd was a success with frm2...

ill try it on my buddies car today and post up the instructions later.. i will upload the .trc file as well

[sono0312]

Originally Posted by *************

ill try it on my buddies car today and post up the instructions later.. i will upload the .trc file as well

thanks for that. i will try it this weekend once u upload it...

[cuco]

Here's my NFRM (FRM2) trc file.

[joepcrepairs2]

Originally Posted by cuco

Here's my NFRM (FRM2) trc file.

MAKE SURE YOU SET THIS VALUE TO (5_hz)

BFD2_BLINKEN
5_hz

after do so go test it out you really have to brake hard and feel the abs kicking in then it will start flashing

[sono0312]

Originally Posted by cuco

Here's my NFRM (FRM2) trc file.

Thankyou very much for your info sharing!
I will pick up the delta, test and report you once I confirm the function with the new setting

[cuco]

Originally Posted by *************

MAKE SURE YOU SET THIS VALUE TO (5_hz)

BFD2_BLINKEN
5_hz

after do so go test it out you really have to brake hard and feel the abs kicking in then it will start flashing

Mines already blink a couple of times with 3_hz. Does that change the blinking speed or times?

[joepcrepairs2]

Originally Posted by sono0312

Thankyou very much for your info sharing!
I will pick up the delta, test and report you once I confirm the function with the new setting

let us know if it worked fine for you.. theres alot of people waiting to see this happen on frm2..


i was able to make it work on frm1 , still need to test it out on frm2 hope i get a chance later to do so ... but let me know if yours work

[sono0312]

Originally Posted by *************

MAKE SURE YOU SET THIS VALUE TO (5_hz)

BFD2_BLINKEN
5_hz

after do so go test it out you really have to brake hard and feel the abs kicking in then it will start flashing

Thanks for the info.
You mean that the function doesn't work under 3hz but 5hz?

[joepcrepairs2]

Originally Posted by sono0312

Thanks for the info.
You mean that the function doesn't work under 3hz but 5hz?

has to work under 3_hz as well but will blink very slow..

5_hz will blink very fast n nice..

you can go to earlir posts I post a video of slow flashing n fast flashing..

[joepcrepairs2]

Originally Posted by sono0312

Thanks for the info.
You mean that the function doesn't work under 3hz but 5hz?

heres the slow (3_hz)

Watch "brake force display on rear fog lights e90coding" on YouTube
brake force display on rear fog lights e90coding: http://youtu.be/fO_CltgPduw


heres the fast (5_hz)

Watch "Bd2 on rear fog" on YouTube
Bd2 on rear fog: http://youtu.be/vGxeV33Ncag

[sono0312]

i just made a comparison table as attached using trc file between one from cuco and the another from myself (sono). i do not know if those are the ones i need to change. but anyway i will try according to this.

these are not all delta but i picked up ones that should be something related to bfd...
would you please give me a feedback if there is something missing?

[updated]
i added some missing values that could be needed to the attached table.