[manueldord]

Hello I have a bmw e90 I would not start and I take a reading and tells me I have no communication with the ews.
that I can encode the problem comes from having bad cas file can do a greeting and thanks

[Ilyas]

Originally Posted by manueldord

Hello I have a bmw e90 I would not start and I take a reading and tells me I have no communication with the ews.
that I can encode the problem comes from having bad cas file can do a greeting and thanks

Why is your CAS bad? Is it hardware or did you unsuccessfully coded it?

[manueldord]

if I coded wrong with cas and now I can not start to do.

Is everything perfect just does not start

[manueldord]

Hello again someone can help me on this issue I'm desperate

[Dtype]

Maybe DDE and EWS get out of sync. Try this that some user here on e90 had posted:

1- Launch inpa
2- Select the engine
3- Choose the model of the engine (in your case
DDE6 = 318d, 320d, 325d, 330d, 335d ( 03/2005 - 09/2007 )
DDE7 = 318d, 320d, 325d, 330d, 335d ( 09/2007 - )

4- Select option: activate (usually F5 but check in your inpa)
5- Select option: EWS
6- Select option: reset ----> in progress ----> click ok
7- Bak to the main menu, ie, back, back, back, and close the INPA
8- Open the inpa and check the errors. That errors should have gone by now.
9- Turn the ignition off, remove the obd connector and start your car.

Thanks

[manueldord]

I'm going to test it later commented

[makkan00]

Originally Posted by Dtype

Maybe DDE and EWS get out of sync. Try this that some user here on e90 had posted:

1- Launch inpa
2- Select the engine
3- Choose the model of the engine (in your case
DDE6 = 318d, 320d, 325d, 330d, 335d ( 03/2005 - 09/2007 )
DDE7 = 318d, 320d, 325d, 330d, 335d ( 09/2007 - )

4- Select option: activate (usually F5 but check in your inpa)
5- Select option: EWS
6- Select option: reset ----> in progress ----> click ok
7- Bak to the main menu, ie, back, back, back, and close the INPA
8- Open the inpa and check the errors. That errors should have gone by now.
9- Turn the ignition off, remove the obd connector and start your car.

Thanks

When you copy something from somewhere then at least give some credit to original author.

[Dtype]

Originally Posted by makkan00

When you copy something from somewhere then at least give some credit to original author.

Sorry man. I was doing this on my iphone because I had copied that to a text note because sometimes when I connect INPA to my 320d I have this problem after that and I don't remember who was the author. If you see I have wrote that is from someone, not me. Won't happen again.

Thanks

[manueldord]

Hola again not work and could not boot.

What if the miles vary with the cas Dashboard start or not?