[johnniewalker]

Can someone explain how to disable fog lights via coding?
I followed the pdf, do i just delete $520 ?

any info would be appreciated.

[neilvosko]

Yep. That's it.
But make sure to code both cas and Nfrm module.

[Najt]

i am curious if the rear fog lights will be also gone...i think yes...but thats not wanted, or???

[PichaDis11]

Why would you disable your fog lights? Just curious.

[Najt]

coz I bought front and rear m packet bumpers and I dont like the look with front lights... e92 M3 doesnt have them also. So I will put there only grills.



on ex e46, the fog lights glass was anyway alwas broken from the stones...

[pweber]

Just disable cold and warm bulb check errors and that's it, you don't need to change VO.

[jwzimm]

Okay, bumping from the dead. I am trying to delete the fogs (for the same reason as the OP) but I don't see $520 in my VO. Am I missing something?

[cyrano]

Dont bother deleting from VO just do what was wrote above, tunr off cold and warm test plus CC_MELD for fogs and thats pretty much it

[Venom692x]

I have LED fogs, that give this error. If I delete the code, it will only delete the warning for the fogs? So if another light goes out, it will still give me a warning about it?

[jwzimm]

Originally Posted by cyrano

Dont bother deleting from VO just do what was wrote above, tunr off cold and warm test plus CC_MELD for fogs and thats pretty much it

I understand I can do this but I would like to "properly" delete the option from the car as that is what I am effectively doing. I guess it just isn't possible. It looks like the $520 option is not used on my car to add the fog lights. I may not have any choice.

[jwzimm]

Originally Posted by cyrano

Dont bother deleting from VO just do what was wrote above, tunr off cold and warm test plus CC_MELD for fogs and thats pretty much it

So in case anyone researches this in the future, I ran into an issue with trying to code out my foglight checks. I went looking for the codes KALTUEBERWACHUNG_NSW_L and KALTUEBERWACHUNG_NSW_R in my NFRM module but they weren't there! I dug through the trace file and I found these though:

KALTUE_NSW_M2_37_M1_3_C32
aktiv
WARMUE_NSW_M2_37_M1_3_C32
aktiv

I changed them to nicht_acktiv and the errors went away!

By the way cyrano, you mention to code off the CC_MELD value for fogs. I found the following line in the NFRM trace file:

CC_MELDUNG_NSW_L
wert_01
CC_MELDUNG_NSW_R
wert_01

What should they be changed to? What will this do with having deleted the cold and warm checks for the fogs? I know that MELDUNG means notification in German but I'm not sure what changing this value will do.

[Cbozz]

Originally Posted by jwzimm

So in case anyone researches this in the future, I ran into an issue with trying to code out my foglight checks. I went looking for the codes KALTUEBERWACHUNG_NSW_L and KALTUEBERWACHUNG_NSW_R in my NFRM module but they weren't there! I dug through the trace file and I found these though:

KALTUE_NSW_M2_37_M1_3_C32
aktiv
WARMUE_NSW_M2_37_M1_3_C32
aktiv

I changed them to nicht_acktiv and the errors went away!

By the way cyrano, you mention to code off the CC_MELD value for fogs. I found the following line in the NFRM trace file:

CC_MELDUNG_NSW_L
wert_01
CC_MELDUNG_NSW_R
wert_01

What should they be changed to? What will this do with having deleted the cold and warm checks for the fogs? I know that MELDUNG means notification in German but I'm not sure what changing this value will do.

I thought it was:

FEHLERMELDUNG_CC_NSW_L
nicht_aktiv
FEHLERMELDUNG_CC_NSW_R
nicht_aktiv

that should do it for you@

[jwzimm]

Originally Posted by Cbozz

I thought it was:

FEHLERMELDUNG_CC_NSW_L
nicht_aktiv
FEHLERMELDUNG_CC_NSW_R
nicht_aktiv

that should do it for you@

I think they have changed a good deal of the codes at some point. The values I posted are in my trace file and they look to be the same as yours in principal.

My question again though is, why do I need to change these? I have had zero issues since I coded out the warm and cold bulb checks. What do these values do?

[Cbozz]

Originally Posted by jwzimm

I think they have changed a good deal of the codes at some point. The values I posted are in my trace file and they look to be the same as yours in principal.

My question again though is, why do I need to change these? I have had zero issues since I coded out the warm and cold bulb checks. What do these values do?

never mind then, since you have no issues you're good. I thought you were coding it all,