code that won't go away

mwahlert · 02-24-2009, 09:37 PM

2F0D: 2F0D Radiator blind, input signal, (GLF) Error will not cause a warning light Error is currently present Test conditions have been completed Timeout  Event 1
Odometer
43752kms
27186miles
Engine speed
640.00
rpm
Speed
0.00
km/h
voltage Kl. 87
14.62
V
pulse-duty factor vent flap
9.77
%

any ideas? i can clear it - but it comes right back.

Bubbles · 02-25-2009, 06:43 AM

Quote:

Originally Posted by mwahlert

2F0D: 2F0D Radiator blind, input signal, (GLF) Error will not cause a warning light Error is currently present Test conditions have been completed Timeout  Event 1
Odometer
43752kms
27186miles
Engine speed
640.00
rpm
Speed
0.00
km/h
voltage Kl. 87
14.62
V
pulse-duty factor vent flap
9.77
%

any ideas? i can clear it - but it comes right back.

Hmmm, I have a "missing data" code that comes back all the time as well. But I think its due to Dinan Flash.

J.P. · 02-25-2009, 08:33 AM

We need a separate board for the BT tool and codes.

ezatnova · 02-25-2009, 10:43 AM

Brilliant idea. MODS! lol

Choolgooz · 09-11-2009, 10:25 PM

Its likely that you are clearing the code but it repopulates immediately. Whatever it is sounds like a real issue, it says "present" in the output.

Mr. 5 · 09-11-2009, 10:39 PM

Quote:

Originally Posted by J.P.

We need a separate board for the BT tool and codes.

We have a Sticky.
I think that's good enough.

mwahlert · 09-11-2009, 11:47 PM

Quote:

Originally Posted by Choolgooz

Its likely that you are clearing the code but it repopulates immediately. Whatever it is sounds like a real issue, it says "present" in the output.

ive had this code for as long as i can remember - i can clear it and yes then it pops right back up...

HERR FSTIR · 09-12-2009, 01:41 AM

I have the same code and am unable to clear it (or it recurs). The code has been present for several thousand miles. No idea what the problem is, or if there really is a problem.

mwahlert · 09-12-2009, 09:50 AM

Quote:

Originally Posted by HERR FSTIR

I have the same code and am unable to clear it (or it recurs). The code has been present for several thousand miles. No idea what the problem is, or if there really is a problem.

yeah very strange...

Bmanny · 09-12-2009, 11:13 AM

Same code i have, i clear it it comes right back...

mwahlert · 09-12-2009, 12:17 PM

Quote:

Originally Posted by Bmanny

Same code i have, i clear it it comes right back...

well i am happy i am not alone.... now if we can only figure out what is causing it...

dmurray14 · 09-12-2009, 12:20 PM

Well it says error is currently present, so that means whatever is tripping it is still tripped. So there's probably something wrong. Take it to the dealer and let them deal with it...

Donald-335i · 09-12-2009, 01:41 PM

i have a SES Light for about 13k miles now and serviced it Twice!!!!!!!!!!!!!!!

and BT Scanned it once and it will not go away for anything...

Choolgooz · 09-23-2009, 09:40 PM

What was it?

mwahlert · 09-23-2009, 09:42 PM

Quote:

Originally Posted by Choolgooz

What was it?

no idea was just bumping for more views/help...

i don't want to ask the dealer about it.... don't want to raise suspicion..

Choolgooz · 09-23-2009, 09:45 PM

ahh IC. GL man.

mwahlert · 10-12-2009, 06:01 PM

they flashed my car with the latest software last time it was in for service and now the code is gone and hasn't come back

02-24-2009, 09:37 PM	#1
mwahlert Lieutenant Colonel 95 Rep 1,659 Posts Drives: 2009 335i Join Date: Apr 2008 Location: NC iTrader: (8)	code that won't go away 2F0D: 2F0D Radiator blind, input signal, (GLF) Error will not cause a warning light Error is currently present Test conditions have been completed Timeout  Event 1 Odometer 43752kms 27186miles Engine speed 640.00 rpm Speed 0.00 km/h voltage Kl. 87 14.62 V pulse-duty factor vent flap 9.77 % any ideas? i can clear it - but it comes right back.
	Appreciate 0 Tweet Quote

02-25-2009, 10:43 AM	#4
ezatnova Colonel 97 Rep 2,188 Posts Drives: C63 AMG Join Date: Jan 2006 Location: West Chester, PA iTrader: (5)	Brilliant idea. MODS! lol
	Appreciate 0 Quote

09-11-2009, 10:25 PM	#5
Choolgooz Lieutenant 8 Rep 450 Posts Drives: 08 335i coupe Join Date: Dec 2007 Location: Bay Area iTrader: (3)	Its likely that you are clearing the code but it repopulates immediately. Whatever it is sounds like a real issue, it says "present" in the output. __________________
	Appreciate 0 Quote

09-12-2009, 01:41 AM	#8
HERR FSTIR Captain 119 Rep 771 Posts Drives: LBB M2C, VO 1M, GSA 1200 Join Date: Sep 2007 Location: Frozen Tundra iTrader: (0) Garage List 2021 BMW X3M Compet ... [0.00] 2019 BMW S1000R [0.00] 2019 M2 Competition [0.00] 2018 BMW 1200 GSA [0.00] 2011 1M Coupe [9.75]	I have the same code and am unable to clear it (or it recurs). The code has been present for several thousand miles. No idea what the problem is, or if there really is a problem.
	Appreciate 0 Quote

09-12-2009, 11:13 AM	#10
Bmanny Lieutenant 41 Rep 405 Posts Drives: Beamer Join Date: Jul 2008 Location: New York iTrader: (1)	Same code i have, i clear it it comes right back...
	Appreciate 0 Quote

09-12-2009, 12:20 PM	#12
dmurray14 The Stig 31 Rep 1,232 Posts Drives: Quickly Join Date: Apr 2005 Location: US iTrader: (1)	Well it says error is currently present, so that means whatever is tripping it is still tripped. So there's probably something wrong. Take it to the dealer and let them deal with it... __________________
	Appreciate 0 Quote

09-12-2009, 01:41 PM	#13
Donald-335i Banned 191 Rep 3,588 Posts Drives: The Hoes Crazy! Join Date: Nov 2008 Location: Central NJ iTrader: (13)	i have a SES Light for about 13k miles now and serviced it Twice!!!!!!!!!!!!!!! and BT Scanned it once and it will not go away for anything...
	Appreciate 0 Quote

09-23-2009, 09:40 PM	#14
Choolgooz Lieutenant 8 Rep 450 Posts Drives: 08 335i coupe Join Date: Dec 2007 Location: Bay Area iTrader: (3)	What was it? __________________
	Appreciate 0 Quote

09-23-2009, 09:45 PM	#16
Choolgooz Lieutenant 8 Rep 450 Posts Drives: 08 335i coupe Join Date: Dec 2007 Location: Bay Area iTrader: (3)	ahh IC. GL man. __________________
	Appreciate 0 Quote

10-12-2009, 06:01 PM	#17
mwahlert Lieutenant Colonel 95 Rep 1,659 Posts Drives: 2009 335i Join Date: Apr 2008 Location: NC iTrader: (8)	they flashed my car with the latest software last time it was in for service and now the code is gone and hasn't come back
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search