Teaser Photos 335i with some m3 style

Joe- · 10-19-2012, 08:45 PM

So Just wanted to give some teaser photo's was able to stop by the body shop today to get an update on my car, and the car is pretty much almost done, waiting for m3 washer tank to come in and a few odds and ends, everything is coming together.

Mods are as followed -

M3 Style Front Bumper Rep - JGMODS
M3 Style Side Skirts - Mod Bargains
Vented FRP Hoods - Mod Bargains
MTech Style Rear Bumper - Mod Bargains
M3 Style Replica Fenders for Non M3 Car - Direct from China company, I have the name somewhere and will list them when I find the name it's in my paper work.

**EDIT: Found the paper work, it's Chieftain Lynn Corp - http://www.usaracingtech.com/ -Fender Fitment was spot on! END EDIT**

Here are some pictures taken with iphone, couldn't find my camera to take good pictures but, color and alignment is spot on.

Hooy · 10-19-2012, 08:48 PM

o_O Tell us how fitment is!

Joe- · 10-19-2012, 09:04 PM

Quote:

Originally Posted by Hooy

o_O Tell us how fitment is!

Fitment is spot on, I was told that the hood had some imperfections and they worked on that alone for 3+hrs but other than that they actually complimented me on the parts saying that they were as close to OEM than they have seen in a long time.

Props to who ever the suppliers are for **********s and JGMODS

Blindside_137 · 10-19-2012, 09:31 PM

oh fawk me that front is sexy

kingofthedemo · 10-19-2012, 09:46 PM

Looking good! My car is in the body shop now also, I'm actually getting very similar parts installed, hope my car will be ready on monday!

tofu- · 10-19-2012, 09:56 PM

I'm a bit confused... If you were changing the hood, bumper, and fenders, why didn't you just go with oem m3 parts?

Joe- · 10-19-2012, 10:13 PM

Quote:

Originally Posted by tofu-

I'm a bit confused... If you were changing the hood, bumper, and fenders, why didn't you just go with oem m3 parts?

Because i wasnt doing oem hood. The hood wouldnt have lined up. If i was doing m3 hood i would have did full oem

Joe- · 10-19-2012, 11:08 PM

Added Fender company, these fenders are not wide m3 fenders they are pretty much 335i fenders with m3 cut outs, although you can purchase the lights from them, I suggest purchasing the OEM m3 lights as they are much better quality than the after market.

The original purchase was made by umnitza but found that their Customer Service = Garbage long story I'd like not to get into, however I ended up returning and purchased directly from china supplier. Chieftain Lynn Corp. http://www.usaracingtech.com/

http://www.usaracingtech.com/product...9%20M3%20style

DC_Oldboy · 10-20-2012, 12:36 AM

Your car looks very nice!

How much did you pay for the fenders if you don't mind me asking?

Yodaime · 10-20-2012, 12:50 AM

You neeedz a Difffuzoorrrr Naooooooooooo sir! but lookin good wit dat hood on da board ya herdz meh?

Mr_PharmD · 10-20-2012, 12:55 AM

are the fenders fiberglass or metal?

Joe- · 10-20-2012, 12:59 AM

Quote:

Originally Posted by Mr_PharmD

are the fenders fiberglass or metal?

Polyurethane same material as oem. Cost was 400 for the set. Not sure if any of forum vendors can get it cheaper but information provided above.

Joe- · 10-20-2012, 01:01 AM

Quote:

Originally Posted by Yodaime

You neeedz a Difffuzoorrrr Naooooooooooo sir! but lookin good wit dat hood on da board ya herdz meh?

I will be changing the diffusor in the future when i do the exhaust as quad exhaust.

Dr. G · 10-20-2012, 04:22 AM

Quote:

Originally Posted by Joe-

Polyurethane same material as oem. Cost was 400 for the set. Not sure if any of forum vendors can get it cheaper but information provided above.

They are $239 freight on board for our vendors, but after everything the price would be the same or higher than what you paid from them so you got a great deal.

I was waiting for someone else to buy them first before me just incase they didn't fit well LOL, thanks for helping me out

Joe- · 10-20-2012, 06:36 AM

Quote:

Originally Posted by Dr. G

Quote:

Originally Posted by Joe-

Polyurethane same material as oem. Cost was 400 for the set. Not sure if any of forum vendors can get it cheaper but information provided above.

They are $239 freight on board for our vendors, but after everything the price would be the same or higher than what you paid from them so you got a great deal.

I was waiting for someone else to buy them first before me just incase they didn't fit well LOL, thanks for helping me out

Np just hoping that m3 washer tank clears and we are good

Javy · 10-20-2012, 08:46 AM

Car is coming out very nice. Cant wait to see it with diffuzoor Naoo and quad exhaust. lol

sterz85 · 10-20-2012, 12:05 PM

you gotta get rid of the fogs. will make the car 10x better

Sean@PYSpeed.com · 10-20-2012, 12:06 PM

Will be waiting to see some outdoor pics.

project335i · 10-20-2012, 12:26 PM

All that crap and you didn't even get a proper suspension set up

Get rid of the fogs and m3 fenders on a non m is just wrong IMO. But hey it's your car right

DanielGonz · 10-20-2012, 01:11 PM

Quote:

Originally Posted by project335i

All that crap and you didn't even get a proper suspension set up

Get rid of the fogs and m3 fenders on a non m is just wrong IMO. But hey it's your car right

I thought I was alone when it comes to disliking 335's with M3 fenders and bumper. Wing is ok though

Joe- · 10-20-2012, 01:57 PM

Quote:

Originally Posted by project335i

All that crap and you didn't even get a proper suspension set up

Get rid of the fogs and m3 fenders on a non m is just wrong IMO. But hey it's your car right

Car is not done

they are teaser photo's suspension is being done as well, I decided to go with KW3 coilovers, but like I said hasn't been installed as of yet, and I may wait until after winter to install so I can decided on ride height. The car has been out of warranty for all of 3 weeks... left the car stock it's whole life since 2007. Let it get a chance to breath!

As far as the fenders, you are entitled to your opinion, however, I can assure everyone that I will not be rocking an M3 Logo on the fenders.

It's not an m3 and I am not trying to be an M3, however I like the style of the rockers, the bumper and the fenders and honestly, not much good "Classy" options out there.

If I wanted to pretend to be an m3, I would have done an M3 rear, fenders, quarters, bumper, rockers, hood.

Vorhies · 10-20-2012, 02:15 PM

Hey man, mad props on the car. Gorgeous

10-19-2012, 08:45 PM	#1
Joe- Lieutenant 17 Rep 522 Posts Drives: 07 E92 335i Join Date: Jun 2011 Location: Greenwich CT iTrader: (2)	Teaser Photos 335i with some m3 style So Just wanted to give some teaser photo's was able to stop by the body shop today to get an update on my car, and the car is pretty much almost done, waiting for m3 washer tank to come in and a few odds and ends, everything is coming together. Mods are as followed - M3 Style Front Bumper Rep - JGMODS M3 Style Side Skirts - Mod Bargains Vented FRP Hoods - Mod Bargains MTech Style Rear Bumper - Mod Bargains M3 Style Replica Fenders for Non M3 Car - Direct from China company, I have the name somewhere and will list them when I find the name it's in my paper work. EDIT: Found the paper work, it's Chieftain Lynn Corp - http://www.usaracingtech.com/ -Fender Fitment was spot on! END EDIT Here are some pictures taken with iphone, couldn't find my camera to take good pictures but, color and alignment is spot on. Last edited by Joe-; 10-19-2012 at 11:05 PM..
	Appreciate 0 Tweet Quote

10-19-2012, 08:48 PM	#2
Hooy Colonel 205 Rep 2,770 Posts Drives: E92 328i, E92 M3 Join Date: Sep 2009 Location: Houston, TX iTrader: (12) Garage List 2008 E92 328 [5.00]	o_O Tell us how fitment is! __________________
	Appreciate 0 Quote

10-19-2012, 09:31 PM	#4
Blindside_137 Lieutenant General 6704 Rep 10,598 Posts Drives: 2011.75 SSII E90 M3 ZCP Join Date: Jun 2010 Location: Raleigh, NC iTrader: (2)	oh fawk me that front is sexy
	Appreciate 0 Quote

10-19-2012, 09:46 PM	#5
kingofthedemo Major 223 Rep 1,100 Posts Drives: BMW E90 Join Date: Mar 2012 Location: USA iTrader: (1)	Looking good! My car is in the body shop now also, I'm actually getting very similar parts installed, hope my car will be ready on monday!
	Appreciate 0 Quote

10-19-2012, 09:56 PM	#6
tofu- Banned 86 Rep 2,854 Posts Drives: 335i Jet Black/Coral Red Join Date: Mar 2010 Location: nyc iTrader: (4)	I'm a bit confused... If you were changing the hood, bumper, and fenders, why didn't you just go with oem m3 parts?
	Appreciate 0 Quote

10-19-2012, 11:08 PM	#8
Joe- Lieutenant 17 Rep 522 Posts Drives: 07 E92 335i Join Date: Jun 2011 Location: Greenwich CT iTrader: (2)	Added Fender company, these fenders are not wide m3 fenders they are pretty much 335i fenders with m3 cut outs, although you can purchase the lights from them, I suggest purchasing the OEM m3 lights as they are much better quality than the after market. The original purchase was made by umnitza but found that their Customer Service = Garbage long story I'd like not to get into, however I ended up returning and purchased directly from china supplier. Chieftain Lynn Corp. http://www.usaracingtech.com/ http://www.usaracingtech.com/product...9%20M3%20style
	Appreciate 0 Quote

10-20-2012, 12:36 AM	#9
DC_Oldboy Q(.)-D Q-(^.~Q) 214 Rep 5,378 Posts Drives: like an old person. Join Date: Aug 2009 Location: Bothell, WA iTrader: (39) Garage List 2006 BMW 330i [8.48]	Your car looks very nice! How much did you pay for the fenders if you don't mind me asking? __________________
	Appreciate 0 Quote

10-20-2012, 12:55 AM	#11
Mr_PharmD Major 44 Rep 1,030 Posts Drives: 335i coupe Join Date: Mar 2011 Location: Fresno iTrader: (19)	are the fenders fiberglass or metal?
	Appreciate 0 Quote

10-20-2012, 08:46 AM	#16
Javy e92javy 46 Rep 1,056 Posts Drives: Alpine White E92 M Join Date: Apr 2010 Location: Miami iTrader: (7)	Car is coming out very nice. Cant wait to see it with diffuzoor Naoo and quad exhaust. lol __________________ Instagram- (javy_e92) 09 335i coupe / M package / Alpine White / Dinan Stage 2 / Alpina B3 Flash / Alufelgen SF71 / ST coils / Lux H8 / AFE Stage 2 intake / 6700k mtech HID / Performance trunk spoiler / Gloss black roof / CF interior wrap / PE Muffler Mod / ETS Charge pipe / Tial BOV / Cyba Quad Diffuser / Cyba Quad Black Chrome tips / Gloss black grills / AW reflectors / LED turn signals / Remote Key +
	Appreciate 0 Quote

10-20-2012, 12:05 PM	#17
sterz85 Second Lieutenant 12 Rep 244 Posts Drives: '07 328xi Join Date: Jan 2011 Location: Troy, MI iTrader: (1)	you gotta get rid of the fogs. will make the car 10x better
	Appreciate 0 Quote

10-20-2012, 12:06 PM	#18
Sean@PYSpeed.com Major General 306 Rep 8,952 Posts Drives: 2009 AW E92 M3 Join Date: Nov 2009 Location: Bay Area iTrader: (22)	Will be waiting to see some outdoor pics.
	Appreciate 0 Quote

10-20-2012, 12:26 PM	#19
project335i Banned 144 Rep 4,501 Posts Drives: Wide Load Join Date: Mar 2011 Location: SAUGA iTrader: (6)	All that crap and you didn't even get a proper suspension set up Get rid of the fogs and m3 fenders on a non m is just wrong IMO. But hey it's your car right
	Appreciate 0 Quote

10-20-2012, 02:15 PM	#22
Vorhies Registered 0 Rep 3 Posts Drives: Black 2008 335xi coupe Join Date: May 2012 Location: East Hanover iTrader: (0)	Hey man, mad props on the car. Gorgeous
	Appreciate 0 Quote