[tmaghack]

Can anyone take a look at my logs and tell me what they think?*
I installed bms dci today and looks like I lost some boost. Any suggestions?

First log is stock mhd stage 1 91
http://www.datazap.me/u/tmaghack/sta...og=0&data=4-20

Second is mhd stage 1 91 with dci
http://www.datazap.me/u/tmaghack/mhd...data=4-6-15-20

[csu87]

your max boost went from 13.9 to 13.7.

You are fine.

[tmaghack]

Ok I was just concerned with the boost fall off of two psi between the two logs.

[mike@x-ph.com]

Originally Posted by csu87

your max boost went from 13.9 to 13.7.

You are fine.

+1

Originally Posted by tmaghack

Ok I was just concerned with the boost fall off of two psi between the two logs.

you did not lose 2 psi.
You lost .2 psi which is irrelevant and within the margin of error

[tmaghack]

I guess I was just concerned between the difference in boost at 5500 rpm. Sounds like I'm good. Thanks for the help guys.

[derrick603]

No, things don't look right. After 5k rpm, you seem to have lost about 1 psi until near redline where you lose 2 full psi. Peak boost is about the same in the midrange, but you've lost some at the top of the rev range.

[csu87]

I figured he let of the throttle the way the boost curve is.

Appears to be a boost leak in each logs is my guess.

[tmaghack]

Guess I have some searching to do then.

[tmaghack]

Could it have anything to do with my low pressure fuel sensor being shot?