|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Halogen to Xenon
|
|
03-11-2011, 09:48 AM | #1 |
Lieutenant
31
Rep 402
Posts |
Halogen to Xenon
Thought we could have a sub-section on how to do this so we don't have to search through main coding thread. It looks like someone has figured out how to code halogen for xenon and also have high beam function. All credit should go to DIMSUM, DESI4LIFE10, and Junior (sorry if I have the names wrong) and everyone else who helped!!!!!! on this and the other BMW forum that is linked below. No credit should go to me as I have done nothing on this convert and truly give all props to the experts! I just wanted to make this thread to make it easier to find. Also, if anyone has any additional information on this retrofit, please post here if you wish. Thanks to all who have helped and solved this issue!!
http://forums.bimmerforums.com/forum....php?t=1600012 Update: Got the high beams to turn on again (Thanks DIMSUM). It isn`t the same command line as the older models. When you add the xenon lights in the VO option, this line gets updated to this: PWM_ANST_FL_BIXENON wert_02 wert_03 With this setup, the high beams gets switched to your xenons and since we don`t have that bi-xenon wire setup, you lose the high beam feature. What you want to do is get the halogen bulb to be you high beam like old times. In order to do this, you need to first add the xenon option in the VO $522. If you start the car up after this, you will get the self leveling error because by default, the leveling feature is usually installed with the xenon lights. No problem. Using ncs expert, go into the frm module and look for this line AUTO_LWR_ENABLE aktiv change it to AUTO_LWR_ENABLE nicht_aktiv To get the halogen bulb to act as high beams, change the line I outlined at the start of this post to this: PWM_ANST_FL_BIXENON wert_01 wert_01 You must have both those lines there. Voila, you have retrofitted your xenons. You can then tap the high beam wire (for your halogen) to your xenon shutter wire to get the bi-xenon feature. This is for the bmw e90 cars (although it should be the same (not 100% sure) for the 1 series and X3). Thanks guys for your help. Disclaimer: Do it at your own risk. Vehicle coding should be done with the proper tools and knowledge. Quote: Originally Posted by orangedawg I have a 2007 328xi (build date 02/07) and I'm about to do this exact conversion and would like to know the answer as well. Also, I'm going to use OEM pre-lci US xenon housings, OEM ballasts and D1s bulbs, with adaptive modules (I have the OEM adaptive module as well, not to be confused with self-leveling). Did you use adaptive headlights? And if so, does the adaptive work? I understand self leveling won't as neither you nor I have installed the levelers on the suspension, I'm just curious if the adaptive part works if you have OEM adaptive modules. Thanks! So long as you have the adaptive module that comes with the headlights (judging by you post, you should have em) it should work. A VO number does exist for just adaptive headlights (still need to add the xenon headlight VO $522). The VO code for adaptive headlights is $524 (according to the vo code list ) The adaptive feature takes angle readings from your steering wheel, which should do the trick (not 100% sure though). Hope this helps. |
03-22-2011, 05:27 PM | #2 |
Second Lieutenant
5
Rep 202
Posts |
bump, I am also getting adaptive headlights...just making sure all I need to get the xenons to work (without high beam and adaptive) is a eBay cable and software?
please inform me on the exact details, I greatly appreciate it. Thanks |
Appreciate
0
|
04-22-2011, 10:56 AM | #3 |
Second Lieutenant
23
Rep 265
Posts |
quick question how do i add the $522 to vo option..i mean i went into the work folder and opened fa.trc and added $522 but how do i send that to my car?
|
Appreciate
0
|
04-22-2011, 11:17 AM | #4 |
Lieutenant
31
Rep 402
Posts |
Here's a link to show you how to do it (BTW, it seems like it takes forever, like over a minute, for this document to come up):
ftp://94.212.182.18/Other-Software/N..._Order_CAS.pdf |
Appreciate
0
|
04-22-2011, 11:22 AM | #5 | |
Second Lieutenant
23
Rep 265
Posts |
Thank you
Quote:
|
|
Appreciate
0
|
04-24-2011, 01:09 PM | #6 |
Lieutenant
31
Rep 402
Posts |
Okay, I'm stumped now on my halogen to xenon retroift. This is what I've got:
1. pre-lci (build date 02/07) E90 that had stock halogens 2. Bought OEM bixenon US with adaptive feature, has all modules (OEM ballast and adpative modules) and stock D1S bulbs Using NCS, I changed the VO for only FRM using the guides (loaded expertmode, went to add $522, using FA WRITE to FRM, then went back and added $524 using same method, again only added to FRM). I only added $522 and $524 to the FRM module, I didn't add it to any other modules. Read FRM after adding VO's. This is what it said (I only searched for "xenon" in the module as the read-out was really long). PWM_ANST_FL_BIXENON wert_01 BI_XENON_FL_ABSCHALT_OPT wert_02 BI_XENON_BEI_LH aktiv XENON_WIEDER_Z_AUS_PHASE wert_01 PWM_ANST_FL_BIXENON wert_01 XENON_AL_VERBAUT nicht_aktiv BI_XENON_VERBAUT aktiv XENON_WIEDER_ZUEND nicht_aktiv XENON_LI wert_02 XENON_WIEDERHOL_Z_OPT nicht_aktiv AUTO_LWR_ENABLE aktiv I changed the following to get high beams to work, per DESI's post. PWM_ANST_FL_BIXENON wert_01 wert_01 AUTO_LWR_ENABLE nicht_activ However, when I go out to the car, no xenons lights up. All other lights (high beams, DRL, turn signals) work as they should, just no xenons. What should I do? Are there more changes I should make? I thought about adding the VO's to the entire car, using "process car" instead of "process ecu ---> FRM", but I'm not sure what changes that will make to my entore car if I'm using the expertmode profile. I don't want to screw up my sirius retofit. Any help? DESi or Dimsum? Thanks! |
Appreciate
0
|
04-24-2011, 02:00 PM | #7 |
Banned
201
Rep 3,328
Posts
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada
|
Umm..did you modify the headlights first?
You need to tap the low beam negative wire to the high beam negative wire. The pins for the negative wire (low beam) are different for halogen and xenon headlights. Therefore the negative on the low beam xenon headlight points to an empty slot (thus not turning on). http://www.e90post.com/forums/showthread.php?t=143927 It's a 2 part process. One is to do the mod in the headlight while the other part is to do the coding. |
Appreciate
0
|
04-24-2011, 02:16 PM | #8 |
Lieutenant
31
Rep 402
Posts |
DESI, thanks so much!! I though you could do it just by coding, and not have to modify any wiring. Now that I know (or at least I think I do) I should be able to set this up. Sorry about my confusion in having to do the wiring. Thanks!
To clarify, is this correct: 1. Add a new wire (ground) into slot #2 on the connector that goes into headlight 2. Tap that wire (using a wire tap/splice) into wire #4 (also a ground) Once that is done, I should be good to go? Also, can you do the coding first and still run with halogens until I install the xenons? Will it throw any errors/have any issues? Also, does my coding I posted above seem correct for the xenons to work? Thanks again! |
Appreciate
0
|
04-24-2011, 02:43 PM | #9 |
Banned
201
Rep 3,328
Posts
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada
|
I sent you a pm with more details.
You have 2 choices, you can do the mod outside the headlight or inside the headlight (I did it inside for a more oem look (tapping the black wire for lowbeam with the brown wire from the highbeam). While your at it, you need to also tap the wire if you want the bi-xenon feature (details can be found in that same link). I should have posted the steps as a 2 part process. The coding eliminates the need to use hid kits with cancellers etc and use all OEM parts. Once you have the low beams tapped to the ground, you will be good to go. You can do the tapping while the headlight is installed on the car as well. Since you have done the coding, you will most likely get an error when you plug the halogen lights in (I don't recommend it). As for your coding process, it looks right. Send me the FRM .man file. |
Appreciate
0
|
04-27-2011, 03:44 PM | #10 |
Private First Class
11
Rep 151
Posts |
Good thread. If I don't want the high beams can I just use these?
http://cgi.ebay.com/ebaymotors/2PC-X...#ht_5115wt_806 |
Appreciate
0
|
05-10-2011, 07:24 PM | #12 |
new to this
0
Rep 1
Posts |
Light bulbs
I'm looking to change my normal headlight bulbs to bright white ones, i have the new 320d m sport but not sure if its gonna be a straight forward change of bulbs or if there are gonna be other complications? can anyone help?
Many thanks |
Appreciate
0
|
08-29-2011, 09:48 PM | #13 |
Private First Class
11
Rep 151
Posts |
Anyone looking as this thread might be interested in these...
http://www.e90post.com/forums/showthread.php?t=576752 |
Appreciate
0
|
12-17-2011, 09:57 PM | #14 | |
photographer // designer
35
Rep 380
Posts |
Quote:
|
|
Appreciate
0
|
12-17-2011, 10:00 PM | #15 |
Banned
201
Rep 3,328
Posts
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada
|
^^^YES
He has been running this setup fine since he last made the post here after doing the wiring mods required for OEM Xenon lights. |
Appreciate
0
|
04-13-2012, 04:02 PM | #16 |
OBD Port Disabled
77
Rep 617
Posts |
Hi there guys, I have a 2010 model e90 lci with halogen and I brought some lci xenon headlights.
So make the headlight work I need to do coding? And for the shutter can you make it work by doing some coding or do you need tap the wires. And what is VO and the $522 is a price of a part? can some one help me please thank you Cheers guys
__________________
E90 LCI M SPORT BUSINESS EDITION - STAY SAFE & HAPPY MOTORING |
Appreciate
0
|
04-13-2012, 04:43 PM | #17 |
Banned
37
Rep 412
Posts |
You must do wiring to make shutter work-sadly, then you need to code it.
Adding $522 to VO it means you need to add value $522 ( yes its a value to add not actual money lol ) and recode your car. Quite simply proces if you know what you are doing cheers mate |
Appreciate
0
|
04-13-2012, 05:03 PM | #18 | |
OBD Port Disabled
77
Rep 617
Posts |
Quote:
Cheers pal
__________________
E90 LCI M SPORT BUSINESS EDITION - STAY SAFE & HAPPY MOTORING |
|
Appreciate
0
|
04-25-2012, 05:23 AM | #19 | |
Private First Class
2
Rep 136
Posts |
Quote:
|
|
Appreciate
0
|
06-17-2012, 03:41 PM | #21 |
Private First Class
2
Rep 136
Posts |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|