[cyphr]

303 aerospace. Been using it for years, great stuff.

[didyoufeelit]

did this to my car w/ 3m di-noc vinyl. matte cf. i got about 4' x 3' i think

here are pics:

http://www.e90post.com/forums/showthread.php?t=524379

[gahbouch]

Hi guys, I'm in boston too and want to wrap my e92 m3 center console in CF to look like my CF leather trim. Do you know which wrap resembles it the most? can u wrap the center console even though it is factory leather wrapped? and does anyone know someone who could do the wrap? unfortunately I have no experience

[cyphr]

PM sent

[rayztoy]

Back from the dead... You guys are AWESOME DIY'ers! Your work is incredible. This board has some incredible talent!

[kgroschi]

Originally Posted by cyphr

I've had some experience. There's some finessing and a couple tricks to learn as you climb the learning curve, but it's far from impossible. I can help you out if you'd like, or shoot you some tips if you decide to tackle it yourself. 1.5yds should be more than enough.

Having worked with a number of products, I'm really not a fan of the di-noc for the interior. It's great for exterior use though. The fabric I use is a semi-gloss black cf and compliments the rest of the interior very well. No complaints so far

Where can I get this and who can do this for me?

[rantexan]

Originally Posted by cyphr

I've had some experience. There's some finessing and a couple tricks to learn as you climb the learning curve, but it's far from impossible. I can help you out if you'd like, or shoot you some tips if you decide to tackle it yourself. 1.5yds should be more than enough.

Having worked with a number of products, I'm really not a fan of the di-noc for the interior. It's great for exterior use though. The fabric I use is a semi-gloss black cf and compliments the rest of the interior very well. No complaints so far

How did you wrap the ash tray cover...does the silver piece unscrew? Looking into doing this myself.
Thanks!

[cyphr]

First, remove the lid by unclipping it from the rotating assembly. Turn the lid over and you'll see the silver piece is pressed to fit then glued to the lid. Carefully remove the glue then apply an even force to both of the pegs. It should come right out. Installation is just the reverse. Hope this helps!

[335xiRacer]

I need to do this at some point

[lmoretti]

Sorry to bring up old thread but Ive ordered some 1080 series semi a 5 x 2 roll and plan on doing this. My question, is how do you ensure the vinyl carbon lines all match up on each piece? Meaning, the direction or flow of the vinyl all match? Or am I not thinking of this the right way? Thanks!

[gazosnic]

With the fabric if you apply a resin clear coat is this really any different than doing real carbon fiber trim?

[gazosnic]

Originally Posted by cyphr

First, remove the lid by unclipping it from the rotating assembly. Turn the lid over and you'll see the silver piece is pressed to fit then glued to the lid. Carefully remove the glue then apply an even force to both of the pegs. It should come right out. Installation is just the reverse. Hope this helps!

@ Cyphr - I flipped mine over and you cant see the back of the trim. Mine (from an m3) has a solid black panel. Any idea how to remove the metal trim?

[zero2sixtyZ]

You have to separate the piece from the assembly first.

http://www.e90post.com/forums/showthread.php?t=696290