[RuskiBimmer]

How do you change maps on the JB3? I heard that you have to push the gas pedel or something?

[Sal G@Camber-Toe]

Originally Posted by RuskiBimmer

How do you change maps on the JB3? I heard that you have to push the gas pedel or something?

accessory on, hold gas pedal down for 4-5 seconds, then push it down to whatever map you want. 5 pumps= map 5

[RuskiBimmer]

So by accessory you mean the jb tune itself or is there some other kind of accessory that it is supposed to come with?

[Kevin@AKMotorwerk]

Originally Posted by RuskiBimmer

So by accessory you mean the jb tune itself or is there some other kind of accessory that it is supposed to come with?

put key in, dont put your foot on the brake, push the start button once- accessory on

[Mike@N54Tuning.com]

Originally Posted by RuskiBimmer

How do you change maps on the JB3? I heard that you have to push the gas pedel or something?

Open door and put the key in the ignition and press the start button without touching any of the pedals. Once the dash lights up press and hold the gas pedal for 4-5 seconds to initiate map changing mode. The release and pump the gas once for map1, twice for map2, etc.

Mike

[Jeff@TopGearSolutions]

Press the unlock button on your remote.
Open door via door handle.
Sit in passenger seat.
Call friend to drive you to nearest Toyota Dealer.
Trade in BMW for Toyota.
Go back Home.
Read instructions for operating Jb3.
Drink away your pain because you bought a Camry that wont stop.

In all seriousness, you should not be map switching if you read the instructions and still dont know how. Let alone if you dont know what accessory means via the ignition.

Please please, stay on a default map.

Map switching directions:
Insert keyfob and press start button to turn ignition on (lights on dash, but engine not running).
Press and hold the gas pedal down to the floor for 4 or more seconds, and then release pedal. This
puts the JB3 in to listen mode. If you start the engine at this point you will be on map 0. For
performance maps press the gas pedal to the floor and quickly release one time for each map you
would like to select. For example for map 3 press and release the gas 3 times, and start the engine.
Your map setting will be saved until changed. If you forget what map you are on, turn engine off
and reset the map selection. When burning a chip map 3 is always selected by default.

www.burgertuning.com/support

[cotmfk]

I agree he should do more research, but maybe he hasn't bought the product yet and was just trying to learn. Sometimes I feel people are a little quick to jump on others.

However, I do not agree that all kids should get trophies just for competing. First place, yes. Second and third, maybe. /Random tangent.

[RuskiBimmer]

Almost funny....

I did not recieve the tune yet so I was just a little confused on how to switch the maps. Thanks to those who helped.

Originally Posted by JPSlick

Press the unlock button on your remote.
Open door via door handle.
Sit in passenger seat.
Call friend to drive you to nearest Toyota Dealer.
Trade in BMW for Toyota.
Go back Home.
Read instructions for operating Jb3.
Drink away your pain because you bought a Camry that wont stop.

In all seriousness, you should not be map switching if you read the instructions and still dont know how. Let alone if you dont know what accessory means via the ignition.

Please please, stay on a default map.



www.burgertuning.com/support

[burberry]

Doesnt "accessory" come on once you stick the key in the fob? or do you have to push start once?

[Syndicategt]

Search Youtube for JB3 map switching. It will show you exactly what to do. FYI you cannot see what map you are on unless you have a boost guage.

[jonerik26]

Originally Posted by burberry

Doesnt "accessory" come on once you stick the key in the fob? or do you have to push start once?

push it once