Ista-d_2.36_ista-p_2.5.40

Sensible_ · 09-27-2013, 11:53 PM

Hi,

Once again i'll share what i'm using

This is an ISID Virtual Machine with both ISTA-D and ISTA-P installed. ISTA-P has been updated to 50.4 and I-LEVELS corrected.

What is unique about this VM is that it has an ICOM EMULATOR built into it. Of course you need an ICOM EMU dongle to use it, unless you want to replace the files with the free version

Thats up to you...

Anyway, to use this - there a 3 network adapters installed. Only eth0 is connected at start up. If you wish to use the emulator you must then turn on the second net adapter eth1 and wait until device configuring messages clear. Then disconnect eth0. Once complete you can start the emulator process as normal.

Also, I made printing easy with quick links to dedicated folder. Hope its useful.

Oh, and download latest winrar as i use RAR5 compression. Sadly 41GB download

MAGNET LINK ISTA-D_2.36_ISTA-P_2.5.40

kris1973 · 09-28-2013, 08:08 AM

This is a full version ??

tinkerman · 09-28-2013, 02:37 PM

Thanks again for sharing your work!

Please seed torrent.

Sensible_ · 09-28-2013, 02:38 PM

Yes, full version. My system is updating. Will be back online tonight.

PichaDis11 · 09-29-2013, 04:32 AM

Thanks for sharing! Now I gotta go get another HD for all this stuff. lol

tinkerman · 09-30-2013, 03:50 AM

Is there a way to boost the 'download speed'? I realize that due to a lack of possible seeders initially, this will initially be a relatively slow download, but less than 1kb/sec download speed makes the ETA at over 2 years!

Are any of you all 'throttling' your upload perhaps?

Update: Thank you all that have been seeding without 'throttling' uploads.

At one point a source was providing 2-3MB/sec! Although that was briefly, still thank you for keeping the uploads 'open'!

B12 · 10-01-2013, 01:20 AM

Quote:

Originally Posted by Sensible_

Yes, full version...

Thank you for this work!

Sensible_ · 10-02-2013, 12:47 PM

Anyone finished the download? Just for information - the RAM is set at 2GB. If you have 6 - 8GB RAM on your host system I suggest setting it to 4GB.

My Work system which is 8GB RAM loaded the VM in approximately 7 - 10 minutes. compared to 20mins with the VM RAM set at 2GB.

B12 · 10-03-2013, 06:21 AM

Quote:

Originally Posted by Sensible_

Anyone finished the download? Just for information - the RAM is set at 2GB. If you have 6 - 8GB RAM on your host system I suggest setting it to 4GB.

My Work system which is 8GB RAM loaded the VM in approximately 7 - 10 minutes. compared to 20mins with the VM RAM set at 2GB.

Hi, still downloading. I will test it asap, one question can you update ISTA/D to 2.37. Do you have the DVD´s? if not I will send you a download via PM.

What is the max RAM I can give the system 8? Notebook has 16GB RAM.

Thank You!

cn555ic · 10-03-2013, 06:30 AM

4 is fine 8 is a bit overkill but it's more than enough. No need to go higher

Sensible_ · 10-03-2013, 01:00 PM

Quote:

Originally Posted by B12

Hi, still downloading. I will test it asap, one question can you update ISTA/D to 2.37. Do you have the DVD´s? if not I will send you a download via PM.

What is the max RAM I can give the system 8? Notebook has 16GB RAM.

Thank You!

Link would be appreciated.

ISTA /D is at 3.39 now though I believe - using a completely different database system.

Sensible_ · 10-03-2013, 01:02 PM

Quote:

Originally Posted by cn555ic

4 is fine 8 is a bit overkill but it's more than enough. No need to go higher

Lol indeed.

alexxx123 · 10-04-2013, 01:43 PM

Quote:

Originally Posted by Sensible_

Link would be appreciated.

ISTA /D is at 3.39 now though I believe - using a completely different database system.

Yes, indeed

But nevertheless if you could share diagnostics 2.37 or 2.38, we would be very grateful to you. Thanks

tinkerman · 10-04-2013, 07:54 PM

I wonder if it is possible to just update the newer ISTA-D files by 'mounting' the appropriate partition of the VM in Windows Explorer? If so, that would save us all from having to redownload a 40+GB via torrent (I'm still downloading at 6 days / 58% downloaded).

B12 · 10-05-2013, 07:05 AM

Quote:

Originally Posted by tinkerman

I'm still downloading at 6 days / 58% downloaded).

Download finished since 2 hours, checked it, but without connected car.
First of all I had to disable the virtualize Intel VT..., because my CPU cant handle it. Check on the car tomorrow.

Thanks again to Sensible, ISTA-D DVD 2.37 download was send yesterday.

hanselfransel · 10-05-2013, 11:58 AM

Thank you very much for your work and upload.Very nice

tinkerman · 10-07-2013, 03:08 AM

Great work indeed. Thank you!

kris1973 · 10-07-2013, 12:29 PM

It works great, thanks

alexxx123 · 10-08-2013, 02:22 PM

Hello everyone. If there is anyone can share information. Tell me how to activate the EXPERT mode ISTA P.
thanks

Sensible_ · 10-09-2013, 04:48 AM

Quote:

Originally Posted by alexxx123

Hello everyone. If there is anyone can share information. Tell me how to activate the EXPERT mode ISTA P.
thanks

Which expert mode? There are 2...are you asking about single module programming?

alexxx123 · 10-09-2013, 09:15 AM

yes, about single module programming, not XP

Sensible_ · 10-10-2013, 05:22 AM

Quote:

Originally Posted by alexxx123

yes, about single module programming, not XP

I havent had a moment to research this although I here the author of ICOM Emulator has enabled it already?

As soon as I get a moment of free time I'll take a look.

09-27-2013, 11:53 PM	#1
Sensible_ Colonel 529 Rep 2,504 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	Ista-d_2.36_ista-p_2.5.40 Hi, Once again i'll share what i'm using This is an ISID Virtual Machine with both ISTA-D and ISTA-P installed. ISTA-P has been updated to 50.4 and I-LEVELS corrected. What is unique about this VM is that it has an ICOM EMULATOR built into it. Of course you need an ICOM EMU dongle to use it, unless you want to replace the files with the free version Thats up to you... Anyway, to use this - there a 3 network adapters installed. Only eth0 is connected at start up. If you wish to use the emulator you must then turn on the second net adapter eth1 and wait until device configuring messages clear. Then disconnect eth0. Once complete you can start the emulator process as normal. Also, I made printing easy with quick links to dedicated folder. Hope its useful. Oh, and download latest winrar as i use RAR5 compression. Sadly 41GB download MAGNET LINK ISTA-D_2.36_ISTA-P_2.5.40 Attached Images
	Appreciate 0 Tweet Quote

09-28-2013, 08:08 AM	#2
kris1973 Enlisted Member 0 Rep 38 Posts Drives: BMW F34 GT 320dA Sport 2014 Join Date: Jan 2010 Location: Poland iTrader: (0)	This is a full version ??
	Appreciate 0 Quote

09-28-2013, 02:37 PM	#3
tinkerman Private First Class 57 Rep 104 Posts Drives: '07 320i (E90) Join Date: May 2013 Location: Korea iTrader: (0)	Thanks again for sharing your work! Please seed torrent.
	Appreciate 0 Quote

09-28-2013, 02:38 PM	#4
Sensible_ Colonel 529 Rep 2,504 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	Yes, full version. My system is updating. Will be back online tonight.
	Appreciate 0 Quote

09-29-2013, 04:32 AM	#5
PichaDis11 Colonel 295 Rep 2,202 Posts Drives: E90 N52 Join Date: Mar 2013 Location: NY iTrader: (3)	Thanks for sharing! Now I gotta go get another HD for all this stuff. lol
	Appreciate 0 Quote

09-30-2013, 03:50 AM	#6
tinkerman Private First Class 57 Rep 104 Posts Drives: '07 320i (E90) Join Date: May 2013 Location: Korea iTrader: (0)	Is there a way to boost the 'download speed'? I realize that due to a lack of possible seeders initially, this will initially be a relatively slow download, but less than 1kb/sec download speed makes the ETA at over 2 years! Are any of you all 'throttling' your upload perhaps? Update: Thank you all that have been seeding without 'throttling' uploads. At one point a source was providing 2-3MB/sec! Although that was briefly, still thank you for keeping the uploads 'open'! Last edited by tinkerman; 10-04-2013 at 10:30 AM..
	Appreciate 0 Quote

10-02-2013, 12:47 PM	#8
Sensible_ Colonel 529 Rep 2,504 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	Anyone finished the download? Just for information - the RAM is set at 2GB. If you have 6 - 8GB RAM on your host system I suggest setting it to 4GB. My Work system which is 8GB RAM loaded the VM in approximately 7 - 10 minutes. compared to 20mins with the VM RAM set at 2GB.
	Appreciate 0 Quote

10-03-2013, 06:30 AM	#10
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	4 is fine 8 is a bit overkill but it's more than enough. No need to go higher
	Appreciate 0 Quote

10-04-2013, 07:54 PM	#14
tinkerman Private First Class 57 Rep 104 Posts Drives: '07 320i (E90) Join Date: May 2013 Location: Korea iTrader: (0)	I wonder if it is possible to just update the newer ISTA-D files by 'mounting' the appropriate partition of the VM in Windows Explorer? If so, that would save us all from having to redownload a 40+GB via torrent (I'm still downloading at 6 days / 58% downloaded).
	Appreciate 0 Quote

10-05-2013, 11:58 AM	#16
hanselfransel Private 27 Rep 83 Posts Drives: BMW Join Date: Oct 2013 Location: EU iTrader: (0)	Thank you very much for your work and upload.Very nice
	Appreciate 0 Quote

10-07-2013, 03:08 AM	#17
tinkerman Private First Class 57 Rep 104 Posts Drives: '07 320i (E90) Join Date: May 2013 Location: Korea iTrader: (0)	Great work indeed. Thank you!
	Appreciate 0 Quote

10-07-2013, 12:29 PM	#18
kris1973 Enlisted Member 0 Rep 38 Posts Drives: BMW F34 GT 320dA Sport 2014 Join Date: Jan 2010 Location: Poland iTrader: (0)	It works great, thanks
	Appreciate 0 Quote

10-08-2013, 02:22 PM	#19
alexxx123 New Member 2 Rep 15 Posts Drives: e87 Join Date: Oct 2013 Location: US iTrader: (0)	Hello everyone. If there is anyone can share information. Tell me how to activate the EXPERT mode ISTA P. thanks
	Appreciate 0 Quote

10-09-2013, 09:15 AM	#21
alexxx123 New Member 2 Rep 15 Posts Drives: e87 Join Date: Oct 2013 Location: US iTrader: (0)	yes, about single module programming, not XP
	Appreciate 0 Quote