Need longer wheel bolts

Sparky68 · 10-19-2012, 09:14 AM

Want to stick some 10mm spacers on the back of the e90, can anyone recommend a decent supplier?

Phil325i · 10-19-2012, 10:26 AM

Got mine from here:

http://www.performancealloys.com/#

Click on 'Wheel Nuts and Bolts'. But unless you know exactly what you're doing, best phone and ask their advice. There are a lot of variations in bolt types, threads, finishes, etc.

ECSTuning · 10-19-2012, 10:53 AM

The specs you're going to need for the 10mm spacers are 12x1.5x40mm conical bolts, hopefully that'll help you a little!

Sparky68 · 10-19-2012, 11:26 AM

Quote:

Originally Posted by ECSTuning

The specs you're going to need for the 10mm spacers are 12x1.5x40mm conical bolts, hopefully that'll help you a little!

Thanks that should make it a whole lot easier

hobo mofo · 10-20-2012, 05:07 AM

Quote:

Originally Posted by Phil325i

Got mine from here:

http://www.performancealloys.com/#

Click on 'Wheel Nuts and Bolts'. But unless you know exactly what you're doing, best phone and ask their advice. There are a lot of variations in bolt types, threads, finishes, etc.

Thanks this was a big help. Another question i need to ask, I put 20mm rear spacers on the rear and have ordered the correct locking nuts but can i stick the 2 remaining extended nuts on the fronts (no spacers)?.

Otherwise i will have a locking nut key for the fronts and a locking nut key for the rears.

The bolts are 12x1.5 60 degree 42mm long.

Hope i've not confused anyone lol

Phil325i · 10-20-2012, 05:53 AM

You could try it, but if you're running with no spacers at all on the front, I suspect the locking bolts will be too long and may foul on the hub behind the disc.

hobo mofo · 10-20-2012, 06:22 AM

Quote:

Originally Posted by Phil325i

You could try it, but if you're running with no spacers at all on the front, I suspect the locking bolts will be too long and may foul on the hub behind the disc.

I will try and see how i get on. Hopefully they do or i might have to look at getting some spacers for the front. Dont like the idea of having two seperate locking keys.

Sparky68 · 10-20-2012, 08:11 AM

Found a seller on Ebay selling individual bolts so as i only need 8 Perfect!
Next i need to find 40mm locking nuts!

Si-M240i · 10-23-2012, 07:37 AM

I got mine from demontweaks

doughboy · 10-23-2012, 08:06 AM

OP - any reputable seller will sell the bolts with the spacers as they are a must have.

I got a 12mm Eibach set with bolts from Teddy at SSDD he does all combos of bolts / locks with his spacers.

Then my 10mm ones from BMS also came with a full set of bolts by default.

Quote:

Originally Posted by hobo mofo

I will try and see how i get on. Hopefully they do or i might have to look at getting some spacers for the front. Dont like the idea of having two seperate locking keys.

Is it really an issue having 2 keys?? How often do you take your wheels off? every 20 minutes?

I have two keys with my winter setup as then I run 10mm spacers on the rear only, so i use longer ones on the rear only.

But summers are 10mm all round, so only 1 key then

No probs.

10-19-2012, 09:14 AM	#1
Sparky68 Brigadier General 676 Rep 4,260 Posts Drives: 2016 M2 Alpine White Join Date: Oct 2012 Location: Cambs UK iTrader: (11) Garage List 2016 BMW M2 [0.50] 2017 BMW F30 330D [0.00] 2014 M135 [0.00] 2007 BMW 335i [0.00]	Need longer wheel bolts Want to stick some 10mm spacers on the back of the e90, can anyone recommend a decent supplier? __________________ OG M2 7sp DCT Masata FMIC - Masata Boost Pipe - Cobra Catless DP - Powervalve Exhaust - Devilsown Methanol Injection BM3 Stage 2
	Appreciate 0 Tweet Quote

10-19-2012, 10:26 AM	#2
Phil325i Brigadier General 615 Rep 3,192 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	Got mine from here: http://www.performancealloys.com/# Click on 'Wheel Nuts and Bolts'. But unless you know exactly what you're doing, best phone and ask their advice. There are a lot of variations in bolt types, threads, finishes, etc. __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 0 Quote

10-19-2012, 10:53 AM	#3
ECSTuning New Lifetime Replacement Policy 811 Rep 11,738 Posts Drives: Independent Tuning Specialists Join Date: Jul 2008 Location: Ohio iTrader: (18)	The specs you're going to need for the 10mm spacers are 12x1.5x40mm conical bolts, hopefully that'll help you a little!
	Appreciate 0 Quote

10-20-2012, 05:53 AM	#6
Phil325i Brigadier General 615 Rep 3,192 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	You could try it, but if you're running with no spacers at all on the front, I suspect the locking bolts will be too long and may foul on the hub behind the disc. __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 0 Quote

10-20-2012, 08:11 AM	#8
Sparky68 Brigadier General 676 Rep 4,260 Posts Drives: 2016 M2 Alpine White Join Date: Oct 2012 Location: Cambs UK iTrader: (11) Garage List 2016 BMW M2 [0.50] 2017 BMW F30 330D [0.00] 2014 M135 [0.00] 2007 BMW 335i [0.00]	Found a seller on Ebay selling individual bolts so as i only need 8 Perfect! Next i need to find 40mm locking nuts! __________________ OG M2 7sp DCT Masata FMIC - Masata Boost Pipe - Cobra Catless DP - Powervalve Exhaust - Devilsown Methanol Injection BM3 Stage 2
	Appreciate 0 Quote

10-23-2012, 07:37 AM	#9
Si-M240i Major 137 Rep 1,450 Posts Drives: M240i LCI Join Date: Aug 2008 Location: England iTrader: (0)	I got mine from demontweaks __________________ M240i LCI (Mineral Grey):- M2 Door Mirrors, M2 Black Kidney Grills, Lower grille inserts, MP Exhaust, Dinan Carbon Fibre CAI, hot climate intake elbow
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search