[a7med606]

like the title said i was searching for a bov that will fit my injen intake on my 1m i found that one

http://www.bmwgarage.com.au/index.ph...vs-turbosmart/

here is a great write up and comparison to the Tialq BOV

this turbo smart BOV race port is a universal part

can any experienced member help us with giving us more information about it .

maybe some one knows if i can find something different , i want a good quality chargepipe that use the stock c clamp and o ring without elbow and the bov that sit next to the throttle body , i always like the active autowerke chargepipe and bov kit but the sad thing is it wont fit the injen intake .

is it possible to fit the active autowerke bov to the er chargepipe with any universal flange ?

[Flex68]

Turbo smart is very popular here In Australia and are a very reputable company .... You won't go wrong with their products

[E92Carlos]

i am going with Raceport as well , very good reviews on it. I will post a review once its installed later this week.

[DennyD06]

I've spoke with brain may at TFT and he recommends race port over tial.

[jyeah]

Which vendor on E90post carries the raceport?

[still in school]

where's a good place to purchase the race port?

[a7med606]

You can buy it directly from turbosmart ,
Should i get it with er charge pipe instead of the aa bov kit ? I want the injen intake thats why i am doing my searches , btw any one knows if the injen will fit the 1m just like the 135i or not ? Because i read somewhere that the steering bottle is different in the 1m

[a7med606]

One more thing we have to check , what about the bov spring and fluttering issue ? Do we have to change the spring to not get our turbo blown or what ? , i hate the tial because i am not a professional in bov's

[mike@x-ph.com]

We carry turbosmart products

[Game]

Originally Posted by mike@x-ph.com

We carry turbosmart products

Which CP do you recommend using it with? Or is it universal and can work with any CP?

[DennyD06]

It can work with a cp with a tial flange . They're flange is the same specs as tial

[mike@x-ph.com]

Originally Posted by Game

Which CP do you recommend using it with? Or is it universal and can work with any CP?

Originally Posted by DennyD06

It can work with a cp with a tial flange . They're flange is the same specs as tial

That's what i have seen most people do. They usually get a VRSF or ER charge pipe with Tial flange.

[335NJ]

Originally Posted by mike@x-ph.com

We carry turbosmart products

Get a sound clip of the new BOV!

[mike@x-ph.com]

Originally Posted by 335NJ

Get a sound clip of the new BOV!

Unfortunately we do not have any sound clip.

[psmitty95]

Originally Posted by mike@x-ph.com

Unfortunately we do not have any sound clip.

Send me one and i'll do a detailed vid of sound clips. Cowl on, off, window open, closed, outside, etc hahahaha

[Tiago@VRSF]

We've sold a few of these so far and they seem to work pretty well. We also sell the specific Turbosmart BOV that works with the Tial flanges

[335NJ]

Someone needs to get a damn sound clip

I'll donate via PayPal 1 whole USD to the first person who does this. Think about that for a minute, let it soak in, that's (almost) a small Slurpee.

[Tiago@VRSF]

It sounds very similar to the Tial. You can find many Turbosmart sound clips on youtube, a BOV on one application will sound exactly like another

[Game]

Originally Posted by Tiago@VRSF

It sounds very similar to the Tial. You can find many Turbosmart sound clips on youtube, a BOV on one application will sound exactly like another

From sound clips I've found it sounds quite different (same CP).

Also, where are the Turbosmart BOVs on the site? Can't seem to find them.