[Beemw335]

Throw that jb+ kn the garbage.
Clear codes.
Look at the left tail pipe inside the bumper you should see the rubber tube, your shop tucked it in there. Plug that tube and plug in the fise in the trunk.
If problem reoccurs go to a new dealership.

[335(EX)(EYE)]

Originally Posted by BES335xi

Had that code and had 2fbc...so i replaced my hpfp last week, no coded atm after 100miles, will report back as i scan my car almost every week or so. might be hpfp idk just saying, i didnt even get ses limp modes or what not, if it wasnt for the 2fbc code they wouldnt of even changed my hpfp...

I plugged the exhaust vacume line and still getting half engine light. My buddy is a tech at BMW he came to my house and looked over everything he doesn't know and I don't know what's going on. I am really furius I can't even drive the car how its meant to be driven due to a problem BMW can't figure out. If anybody has insight please help

[335(EX)(EYE)]

Originally Posted by Beemw335

Throw that jb+ kn the garbage.
Clear codes.
Look at the left tail pipe inside the bumper you should see the rubber tube, your shop tucked it in there. Plug that tube and plug in the fise in the trunk.
If problem reoccurs go to a new dealership.

Yeah I found it. It was plugged. I can't go to another dealership. It's mad far away. I'm taking it to a tuner shop on the ninth of next month. What should I tell them to do? I have a bav tech cable is there anything I can do wit the cable to further diagnose 30ff ?? Is there anyway I can see boost levels wit the bav tech cable? If so can somebody chime in with detailed steps?

[BES335xi]

Tell ur dealer to check or test the hpfp idk what else...