|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Sold - BMW Carly Bluetooth Adapter Gen 1
|
|
01-19-2017, 03:27 PM | #1 |
First Lieutenant
31
Rep 316
Posts |
Sold - BMW Carly Bluetooth Adapter Gen 1
BMW Carly gen 1 bluetooth adapter for Android only. Works fine for diagnostics and coding, but some models need the gen 2 adapter to get other functions like DPF.
£25 posted. Last edited by half Colin; 02-03-2017 at 04:20 AM.. |
01-21-2017, 05:05 AM | #3 | |
First Lieutenant
31
Rep 316
Posts |
Quote:
Maybe someone with Carly and and folding mirrors on an LCI can help. |
|
Appreciate
0
|
02-01-2017, 02:14 PM | #6 |
First Lieutenant
49
Rep 394
Posts |
I would like to buy this.
Can any expert confirm if I can reset my electric door windows with Carly please. Had battery disconnected for a repair and now can't open or close the windows via Remote. |
Appreciate
0
|
02-01-2017, 02:58 PM | #7 | |
First Lieutenant
31
Rep 316
Posts |
Quote:
But send me a PM if you want to buy it. |
|
Appreciate
0
|
02-01-2017, 03:31 PM | #8 |
First Lieutenant
49
Rep 394
Posts |
can the carly app reset this ?
I tried this method you mentioned.. not sure sure if did it wrong but the window stopped completely and i had a panic. Then the window went back to the stupid manual option. Its a pain when you forget to close the windows after you exit the car |
Appreciate
0
|
02-02-2017, 05:21 AM | #9 | |
First Lieutenant
31
Rep 316
Posts |
Quote:
In the meantime I found this on another site. Courtesy of a BMW tech on another forum, ...with thanks. Initialization is performed on the power window switch of the relevant door. Requirements for correct initialization: • Initialization with engine running • Convertible top, doors and windows closed Initialization comprises: • Erasure of initialization • Reinitialization An initialization must be performed: • In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible • After the power window drive has been replaced • After work is carried out on the power window mechanism • After a power supply interruption, e.g. disconnection of the battery or disconnection of the power supply to the door • After the door window glass has been removed and installed or replaced • After adjustment work on the door window glass • After adjustment work on the convertible top • After replacement of seals Erasure of initialization: • Open door window glass fully • Operate power window switch in "Open" position four times within 10 seconds This erases initialization of the power window, anti-trapping protection and toll function are inactive. Check whether one-touch control (toll) function is inactive, otherwise repeat procedure. Reinitialization: Avoid a break between the two steps! • Open door window glass fully • Operate and hold power window switch in "Close" position (second switch stage) • Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer • Open door window glass fully • Operate and hold power window switch in "Close" position (second switch stage) • Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer |
|
Appreciate
0
|
Bookmarks |
|
|