[Pseudo Nim]

Originally Posted by BeWide

Sorry, I'm french, so sometimes my vocabulary is wrong...

Then I try to explain more , when we change the engine mapping of a vehicle, we must log the data engine to check the variable (turbo pressure, injection,...) I wondering if anyone here knew a logging software for bmw (like VCDS for Volkswagen )

Am I more clear?

Ahh, sorry, my bad - I see what you mean now. You want to do the same level of logging as the chip tunes, or the Cobb tune does, but WITHOUT having one of those, eh...

Hmm. Well, it's definitely POSSIBLE, since the Bavarian Technic BT Tool can do it.... but I'm afraid that's where my knowledge runs out. I hope someone can comment on this!

Btw: there are definitely some "generic" OBD-II readers out there, for example, even in Centrafuse (the car PC frontend by Flux Media). Not sure how useful they are to BMWs, though, since from what I understand BMW has its own sub-set of the OBD-II protocol, so there's plenty of things that you'd have to specifically code FOR the BMW.

Anyway, hope someone can comment, that'd be interesting to know

[BeWide]

Originally Posted by onebadmofo

Hooray! I got the SSS talk to the car finally. Only thing is that my SSS is too old. Updating it now

Where did you get SSS ? It fully work ? Please tell us

[txusa03]

Originally Posted by BeWide

Just added your code in the spreadsheet for you .

Can you make a little video to show the sound difference ? Thx

Thanks, you quoted me b4 I can correct myself. I just tried the
wert_04
wert_05
wert_06
and it does not lower the sound, I loose the chirp completely both lock and unlock. So if you want lound, leave it at
wert_04
wert_05

No need for video, sorry I have no video camera and no iphone/smart phone (Still uses the old 5yr motorolla v330). It does not take long to change these values and test yourself.

Originally Posted by Neutrino45

Here you go!

https://spreadsheets.google.com/ccc?...CPqY7sEC#gid=0

Page 1, directly below the 2 pictures in the 1st post.

Thanks! Dont know how I missed that...Just requested access for it.

[Pseudo Nim]

Hey Be-Wide, just read your blog -- does the eLight module really allow you to do completely custom sequences? Like, can you create "waves" - fade in headlights, then fade them out and fade in tail lights or something?

[BeWide]

Originally Posted by Pseudo Nim

Hey Be-Wide, just read your blog -- does the eLight module really allow you to do completely custom sequences? Like, can you create "waves" - fade in headlights, then fade them out and fade in tail lights or something?

Exactly ! I had to take this module to have daytime running lights Permanent (Angel eyes) without turning on parking lights.

It also allows the activation of cornering-light.

And since you ask, when locking, unlocking it is possible to program any sequence. I use it for a year now and have never had a problem.

[Toshi]

Sorry to jump in.

Finally I was able to turn on only AE's as DRL on Japan-spec pre-LCI E90/E91 models.

[Control unit: NFRM]

TAGFAHRLICHT_ECE_1
nicht_aktiv > aktiv

VERHALTEN_DRL_TFL
drl_tfl_off > tfl_s

Is there anybody who wants to try these codes on the US/EU-spec models?

Somebody said "TAGFAHRLICHT_ECE_1 = nicht_aktiv" deletes the high-beam DRLs but as far as I've tried, it disables the DRL itself. This value must be "aktiv".

[el-drifot]

Originally Posted by spazticrecords

Thanks @El-Drifto. Nice find I am going to test this later. (What year is your car? Do you know if you can use DVD in motion in Germany stock?)


.

@spazticrecords
My 318d is build in 2008, Pre LCI. In germany you cannot watch DVD while in motion.. Also no TV

Found something else:

If you dont want to have climate turned on, when you press the "auto" button on climate controll, Change this

Module: IHK

KLIMA_MIT_AUTO_0
nicht_aktiv
KLIMA_MIT_AUTO_1
nicht_aktiv
KLIMA_MIT_AUTO_10/15
nicht_aktiv
KLIMA_MIT_AUTO_2
nicht_aktiv
Change all4 from aktiv to nicht_aktiv

When you press the Auto Button on climatecontroll, you can turn on Climate just when you want it, not automaticly by the climatecontroll itself.

Greetz
El-Drifto

[The_DDub]

Originally Posted by Toshi

Sorry to jump in.

Finally I was able to turn on only AE's as DRL on Japan-spec pre-LCI E90/E91 models.

[Control unit: NFRM]

TAGFAHRLICHT_ECE_1
nicht_aktiv > aktiv

VERHALTEN_DRL_TFL
drl_tfl_off > tfl_s

Is there anybody who wants to try these codes on the US/EU-spec models?

Somebody said "TAGFAHRLICHT_ECE_1 = nicht_aktiv" deletes the high-beam DRLs but as far as I've tried, it disables the DRL itself. This value must be "aktiv".

Nice, you beat me to it. I'll try this on my US spec preLCI E90. I already have DRL enabled in the iDrive, so all I need to code is the VERHALTEN_DRL_TFL.

I just checked a printout of my NRFM trace and my value is as follows:

VERHALTEN_DRL_TFL
drl_h

Does "h" possibly mean high-beam? I wonder how they reference AE?

There is also another VERHALTEN line in my NFRM:

VERHALTEN_DRL_TFL_3R
drl_h

I'll try the non-3R value first!

Stay tuned...

[BeWide]

Toshi and El-Drifto I have added your code to the spreadsheet

[The_DDub]

IT WORKS!!! Big arigato Toshisan! I will post a youtube vid up sometime. Pre LCI E90 AE as DRL!!

[Pseudo Nim]

Originally Posted by The_DDub

IT WORKS!!! Big arigato Toshisan! I will post a youtube vid up sometime. Pre LCI E90 AE as DRL!!

WHAAT!!!!! details!! or .. <scrolls up>?

[edit] duh. scrolled up. will try this!!!!!!!

[Neutrino45]

Originally Posted by The_DDub

IT WORKS!!! Big arigato Toshisan! I will post a youtube vid up sometime. Pre LCI E90 AE as DRL!!

This is a big win for us!!! Do post videos. I don't have time to code my car yet. I've got to do some house work...

[AW128i]

Originally Posted by The_DDub

IT WORKS!!! Big arigato Toshisan! I will post a youtube vid up sometime. Pre LCI E90 AE as DRL!!

Yes, please post a vid. Also, can you please detail the changes that you made to make this happen, that way we have all the required changes in one post? Add it to the Google spreadsheet too, please!

[The_DDub]

Originally Posted by Neutrino45

This is a big win for us!!! Do post videos. I don't have time to code my car yet. I've got to do some house work...

Vid is up. Here it is the vid taken on my iphone4.

[BeWide]

I have adrealy added to the spreadsheet.

But then, what the TAGFAHRLICHT_ECE_1 do so ?

The DDub we dont see your video, please check your code.

[Pseudo Nim]

nice. nice flicker too what are your AEs running on?

[The_DDub]

Originally Posted by Pseudo Nim

nice. nice flicker too what are your AEs running on?

Those are Depo headlamps running LED AE bulbs from ledwholesalers.com.

I can't figure out the embed

[Pseudo Nim]

Originally Posted by The_DDub

Those are Depo headlamps running LED AE bulbs from ledwholesalers.com.

I can't figure out the embed

Instead of pasting a Youtube link, take the video ID (i.e. XXaasdASDasd) and use (U2B) ... (/U2B) and just put the ID in it. Replace with square brackets though.

[rubdom]

Works for me too! I have Angel Eyes running as DRLs. I can completely remove my Daeos harness now! WooHoo! That is $60 and 2 hour install down the drain.

[The_DDub]

Originally Posted by Pseudo Nim

Instead of pasting a Youtube link, take the video ID (i.e. XXaasdASDasd) and use (U2B) ... (/U2B) and just put the ID in it. Replace with square brackets though.

Got it, thanks.

[BeWide]

Just a detail, I see you have the Idrive, but I think these code dont work on a pre-lci without Idrive...

[AW128i]

Originally Posted by The_DDub

Vid is up. Here it is the vid taken on my iphone4.

Excellent, and even better that you're running Depo lights as I thought you were running retrofitted OE xenons. On the Google spreadsheet, I noticed there are two entries for the AE DRLs, TAGFAHRLICHT_ECE_1 and VERHALTEN_DRL_TFL. Do we know which it is that enabled your functionality?