|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Battery change/registration
|
|
08-02-2014, 11:59 PM | #1 |
Banned
55
Rep 591
Posts |
Battery change/registration
I am installing a new battery tomorrow with a different cca rating. My new battery is 900, the original is 720. What do I need to change?
I have a BT cable, and will just register with the wrong cca otherwise. Thanks in advance! |
08-03-2014, 03:50 AM | #2 | |
Colonel
529
Rep 2,503
Posts |
Quote:
Tool32 INPA ISTA DIS If its just the cold cranking amps difference I don't believe you'll need to code it. However if its a different AH rating you'll need to change your VO to reflect this then code to default. E B046 BATT_46AH //46 Ah-Batterie E B055 BATT_55AH //55 Ah-Batterie E B070 BATT_70AH //70 Ah-Batterie E B080 BATT_80AH //80 Ah-Batterie E B090 BATT_90AH //90 Ah-Batterie E A070 BATT_AGM_70AH //70 Ah-AGM Batterie E A080 BATT_AGM_80AH //80 Ah-AGM Batterie E A090 BATT_AGM_90AH //90 Ah-AGM Batterie e.g. if your current battery is rated at 70Ah you'd need to add A090 to the VO for a 90Ah one. |
|
Appreciate
0
|
08-03-2014, 08:34 AM | #3 | |
Banned
55
Rep 591
Posts |
So just change the VO? What else.
Thanks Quote:
|
|
Appreciate
0
|
08-03-2014, 09:09 AM | #4 |
Colonel
529
Rep 2,503
Posts |
1 - Remove old battery entry from VO e.g. -B090 and add new entry e.g. -A090 to VO/FA and code to CAS and FRM using NCSexpert.
2 - Code module to default VO 3 - Register new battery using toolset32 4 - Read IBS code pages using INPA where it will indicate the mileage the battery was replaced (verifying registration). That is just a summary. There are detailed guides all over the net. |
Appreciate
0
|
Bookmarks |
|
|