[starbai]

Hey guys... I PMed JTSherri for 1/4" Underseat Kicker SMB8 spacers...

I haven't heard back from him and I know that I read something a while back about the fact that he may not be offering these anymore.

Does anyone know any other ways to get a hold of him? (his account says he hasn't been on the forum since 2/11)

If that wont work I dont have the tools needed to make spacers... can anyone suggest anywhere else I can get these or something similar that will work?

[taibanl]

[forumname]@gmail.com

[starbai]

Originally Posted by taibanl

[forumname]@gmail.com

thanks, sent.

[sunmans]

I'm quite sure he is still making them. I checked in March 2013.

[ctuna]

It would be nice to be able to 3d print these.

Both the door and floor speaker adapters.

Also small design changes could be made easily .

[X.X.I.V]

Yes JTsherri is still making speaker adapters
The gmail address above is how I got to him (sent him an email this morning)
He's makings a set for my kicker SSMB underseat subs
Send him an email he usually will answer back within a day

[taibanl]

Originally Posted by mario0573

Yes JTsherri is still making speaker adapters
The gmail address above is how I got to him (sent him an email this morning)
He's makings a set for my kicker SSMB underseat subs
Send him an email he usually will answer back within a day

Make sure the opening is 7.25 and also that the thickness is increased to 3/4" if you have a base stereo system

[sunmans]

I've been in contact with 808MGuy. He doesn't make the spacers for the front doors now.

[sunmans]

I just got my spacers in the mail today. They look really nice!

[starbai]

Originally Posted by sunmans

I just my spacers in the mail today. They look really nice!

sent JTSherri an email on March 1st with no reply... sent another one again a moment ago... hopefully hes okay and does reply.

[starbai]

he just replied and I sent payment. I will update thread when I receive em'

[sunmans]

His spacers are top quality. I'm one happy customer!

[Ml3456]

Sent a request in to via gmail. Hope they are still made??

[starbai]

Originally Posted by starbai

he just replied and I sent payment. I will update thread when I receive em'

Just got them this past week... quality is awesome.. very impressed so far.

I haven't (nor will have) had the time to install just yet... but will do so shortly.

[bmw325i]

Originally Posted by SpdRcer43

Here's a list of my newbie questions:[LIST][*]Does anyone know how to calculate what the ohm-age will be to each speaker? Does it even matter?

Since all of your speakers are 4 ohms, if you only wire one speaker per channel they will all be 4 ohms. So look at the 4 ohm rating on your amps. If money isn't a factor, look at Alpine PDX and JL HD series.

If you were to connect more than one of the same speaker to the same channel then it depends on how you wire it. In parallel, i.e. both positives together both negatives together, the impedance is cut in half since the power travels the same distance through two equally sized paths. So for two 4 ohm speakers in parallel your impedance at the amp is 2 ohms.

If you wire them in series, positive from amp to positive on 1st speaker, negative on the 1st speaker to the positive on the 2nd speaker, and the negative on the second speaker connected to the negative on the amp. The impedance would double, so two 4 ohm speakers would be 8 ohms.

[scramjet]

Just e-mailed jtsherri and ordered through PayPal today! jtsherri -/- gmail

[williaM-Sport]

Well the spacers are definitely available I just ordered a set today! Gmail and a little forum member assistance was the route I went to get in contact with jtsherri. Very helpful and responsive once contact was made.

With that said, I heard the install is pretty simple if you do it yourself can anyone here confirm that?

[MRR11]

I can also confirm the best way to contact JTSherri is via the email address provided above. I emailed JTSherri this morning and have already received a response -- and the order has been placed and paid for.

[sunmans]

He's a great person to do business with. I have no problem recommending him to anyone and will do business with him again.

[jeremyp111]

Thanks to this thread I was able to contact JTSherri and order a set of spacers. Thanks for the info on how to reach him.

These spacers will make the sub upgrade a piece of cake!

JP

PS - yeah this is my first post here on e90post. I've been on bimmerforums and bimmerfest for about a year. Great forum you have here...TONS of great info!

[Pete22]

I'm looking to order a set of underseat spacers as well. Is he also making the front door speaker spacers?

[sunmans]

From what I know, he only makes underseat spacers.