How to turn on procede valet mode?

Alchem · 01-15-2011, 01:48 PM

Taking the car to the dealer. Is this the 'transport mode' in command center?

I have cleared the codes using the accelerator and put the car to map 0. Its been a few days so the drive cycle test should have been completed.

I just want to make sure the procede doesn't interfere with their computers.

onebadmofo · 01-15-2011, 01:50 PM

Just take it off, it takes 20-30 minutes for everything.

Alchem · 01-15-2011, 01:53 PM

Quote:

Originally Posted by onebadmofo

Just take it off, it takes 20-30 minutes for everything.

My SA is OK with it, but just have to make sure it doesn't interfere.

BrianMN · 01-15-2011, 01:54 PM

Quote:

Originally Posted by onebadmofo

Just take it off, it takes 20-30 minutes for everything.

+1

Once you do it once, it shouldn't be more than 10-15minutes, and you'll feel better with it off while at the dealer.

I timed myself taking it off/installing at a racetrack...about 5 minutes hood open to hood closed.

enrita · 01-15-2011, 01:54 PM

Map 0 is valet mode and it wont interfere but best to remove it.

secretsquirrel · 01-15-2011, 02:20 PM

It looks like the other beat me to the answer, but just to clarify: Valet mode is stock mode, which is accessed by going to map 0. Transport mode is a reduced rpm mode that is accessed via the command center. Two totally different things.

Also if you're fling the car in, be sure to turn off the CAN clearing functionality so the dealer can connect thier tools

AltecBX · 01-15-2011, 02:29 PM

Quote:

Originally Posted by secretsquirrel

It looks like the other beat me to the answer, but just to clarify: Valet mode is stock mode, which is accessed by going to map 0. Transport mode is a reduced rpm mode that is accessed via the command center. Two totally different things.

Also if you're fling the car in, be sure to turn off the CAN clearing functionality so the dealer can connect thier tools

Does CAN clearing work in Map 0?

OpenFlash · 01-15-2011, 02:32 PM

When RPM is equal to 0, there is no CAN activity on ANY map. So realistically, the DME can be reprogrammed no problem since the engine is always off. The only time you really need to go into valet mode (with CANclear off) is when using a diagnostic tool while the engine is running.

Shiv

AltecBX · 01-15-2011, 02:38 PM

Quote:

Originally Posted by shiv@vishnu

When RPM is equal to 0, there is no CAN activity on ANY map. So realistically, the DME can be reprogrammed no problem since the engine is always off. The only time you really need to go into valet mode (with CANclear off) is when using a diagnostic tool while the engine is running.

Shiv

Now it's starting to make sense how this whole CanClear works.
Thanks for clarifying it.

Alchem · 01-15-2011, 04:12 PM

Thanks for the info. All did was leave it on Map 0. I would have taken it out but its 10degrees outside and i would probably end up breaking something in the ECU. I just took the DCI off which was easy.

Just got back from dealer, not a word about tune.
Following was performed:
Standard Scope Software check (Was a bit nervous about this one)
Oil Change
Brake Fluid Change
Wiper Blade Replacement
Air Filter replacement

Thank you shiv for an amazing product.

**335i** · 01-15-2011, 04:31 PM

wonder why u took off the dci can your sa get suspicious or what?

Alchem · 01-15-2011, 04:35 PM

Quote:

Originally Posted by **335i**

wonder why u took off the dci can your sa get suspicious or what?

Just in case in case my SA was not in, i did a walk in not an appointment. Also I wanted to remove the DCI and revert back to stock. I am not a fan of the whoosh noise and did not really feel a difference in power.

**335i** · 01-15-2011, 04:39 PM

Quote:

Originally Posted by Alchem

Just in case in case my SA was not in, i did a walk in not an appointment. Also I wanted to remove the DCI and revert back to stock. I am not a fan of the whoosh noise and did not really feel a difference in power.

okay gotcha

GiRtHyN55 · 04-05-2011, 03:50 PM

Hey guys i know this an old post , just wondering i was test out the valet mode, i turned on the transport mode and the car is still reving past 4k. is there something im not doing right ?

Joe@TopGearSolutions · 04-05-2011, 03:57 PM

Quote:

Originally Posted by GiRtHyN55

Hey guys i know this an old post , just wondering i was test out the valet mode, i turned on the transport mode and the car is still reving past 4k. is there something im not doing right ?

Any reason for transport mode? Wish I could help, never used it.

GiRtHyN55 · 04-05-2011, 04:00 PM

No not really . Just testing out all the features of the procede.

01-15-2011, 01:48 PM	#1
Alchem Lieutenant 43 Rep 420 Posts Drives: 335xi Join Date: Mar 2007 Location: Chicago iTrader: (0)	How to turn on procede valet mode? Taking the car to the dealer. Is this the 'transport mode' in command center? I have cleared the codes using the accelerator and put the car to map 0. Its been a few days so the drive cycle test should have been completed. I just want to make sure the procede doesn't interfere with their computers.
	Appreciate 0 Tweet Quote

01-15-2011, 01:50 PM	#2
onebadmofo Colonel 346 Rep 2,396 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	Just take it off, it takes 20-30 minutes for everything.
	Appreciate 0 Quote

01-15-2011, 01:54 PM	#5
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Map 0 is valet mode and it wont interfere but best to remove it. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

01-15-2011, 02:20 PM	#6
secretsquirrel Colonel 130 Rep 2,291 Posts Drives: f80 Join Date: Dec 2010 Location: Far North Dallas iTrader: (2)	It looks like the other beat me to the answer, but just to clarify: Valet mode is stock mode, which is accessed by going to map 0. Transport mode is a reduced rpm mode that is accessed via the command center. Two totally different things. Also if you're fling the car in, be sure to turn off the CAN clearing functionality so the dealer can connect thier tools
	Appreciate 0 Quote

01-15-2011, 02:32 PM	#8
OpenFlash 1737 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	When RPM is equal to 0, there is no CAN activity on ANY map. So realistically, the DME can be reprogrammed no problem since the engine is always off. The only time you really need to go into valet mode (with CANclear off) is when using a diagnostic tool while the engine is running. Shiv
	Appreciate 0 Quote

01-15-2011, 04:12 PM	#10
Alchem Lieutenant 43 Rep 420 Posts Drives: 335xi Join Date: Mar 2007 Location: Chicago iTrader: (0)	Thanks for the info. All did was leave it on Map 0. I would have taken it out but its 10degrees outside and i would probably end up breaking something in the ECU. I just took the DCI off which was easy. Just got back from dealer, not a word about tune. Following was performed: Standard Scope Software check (Was a bit nervous about this one) Oil Change Brake Fluid Change Wiper Blade Replacement Air Filter replacement Thank you shiv for an amazing product.
	Appreciate 0 Quote

01-15-2011, 04:31 PM	#11
335i Colonel 184 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	wonder why u took off the dci can your sa get suspicious or what? __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote

04-05-2011, 03:50 PM	#14
GiRtHyN55 Private 4 Rep 92 Posts Drives: 2011 335xi Join Date: Dec 2010 Location: white plains, ny iTrader: (0) Garage List 2011 335 x drive [0.00]	Hey guys i know this an old post , just wondering i was test out the valet mode, i turned on the transport mode and the car is still reving past 4k. is there something im not doing right ? __________________ 2011 Black 335 xi MT- M package- Cold weather- BMW Performance Grills-PIAA H8 yellow fogs-Procede V5-Vishnu DP 3.5 inch- CDV delete-Vishnu Charge Pipe - *Waiting on meth kit* - H&R Springs Sport Kit
	Appreciate 0 Quote

04-05-2011, 04:00 PM	#16
GiRtHyN55 Private 4 Rep 92 Posts Drives: 2011 335xi Join Date: Dec 2010 Location: white plains, ny iTrader: (0) Garage List 2011 335 x drive [0.00]	No not really . Just testing out all the features of the procede. __________________ 2011 Black 335 xi MT- M package- Cold weather- BMW Performance Grills-PIAA H8 yellow fogs-Procede V5-Vishnu DP 3.5 inch- CDV delete-Vishnu Charge Pipe - *Waiting on meth kit* - H&R Springs Sport Kit
	Appreciate 0 Quote