|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: OS Giken TCD LSD in Complete 3.08 Final Drive w/ Finned Diff Cover
|
|
03-26-2016, 12:46 AM | #1 |
Major General
422
Rep 8,003
Posts
Drives: '08 E90 335i, '99 E36 M3
Join Date: Apr 2009
Location: Houston, TX & Atlanta, GA
|
FS: OS Giken TCD LSD in Complete 3.08 Final Drive w/ Finned Diff Cover
OS Giken TCD Limited Slip Differential for 135i / 135is & 335i / 335is.
Already installed in "large pumpkin" (all 6MT and some AT cars). Built by VAC Motorsports. Also includes custom finned differential cover for additional cooling! 3.08 ratio. This is a top of the line LSD. It's a 1.5-way clutch type diff with 20 clutch plates, etc. etc. The lock-up is smooth, progressive, and extremely controllable. This was my favorite modification and it totally transformed the car. It has approximately 10,000 miles on it and four track days. Otherwise, it has been subjected to mundane street driving. Meticulously maintained - see below for details. Original differential cover available if you prefer. Finned differential cover has been modified to clear OEM exhaust. During installation, the subframe differential bushing has to be pulled out slightly to mate well with the cover. This doesn't cause any issues whatsoever. You can also find a small spacer to take up the gap instead if you prefer. The differential was dead quiet (absolutely no whining, clunking, or any issues). Asking price: $3100 or best offer (local only, please - not willing to ship). Will meet anywhere in Atlanta, ITP or OTP. I don't need a swap with your OEM final drive. This is a full pumpkin with the OSG LSD already installed in it, preload/backlash set, fluid filled, etc... just "plug-and-play". It will come in a plastic tub with lots of padding for easy and safe transportation. Part Cost ($4725) -------------------- Good/used low mileage housing from VAC: $900 OS Giken TCD installed into the housing by VAC: $3775 Shipping: $50 Maintenance ($1100) ------------------------ Fluid flush after initial break-in at 800 miles: $100 Input pinion seal replacement: $350 Fluid flush with OS-250R fluid at 4,000 miles: $150 Custom finned differential cover and install: $350 Fluid flush with OS-250R fluid at 7,000 miles: $150 ---------------------- Contact via e-mail please: Thanks for looking! ---------------------- |
Bookmarks |
|
|