[myfirstbimmer]

Hey all,

Anyone here used BMW's Paint Scratch Remover? My local dealer carry this new product, it is sold as a kit and includes 2 polishs, buffing cloth, and a few peices of sand paper. Part number is 51 91 0 410 163

Anyone?

THx

Tom

[nhhiep]

how do you remove scratch with sandpaper?

[kobechrome]

Originally Posted by nhhiep

how do you remove scratch with sandpaper?

Must be for wet-sanding down the overpaint on the touchup.

[Asiann]

Originally Posted by myfirstbimmer

Hey all,

Anyone here used BMW's Paint Scratch Remover? My local dealer carry this new product, it is sold as a kit and includes 2 polishs, buffing cloth, and a few peices of sand paper. Part number is 51 91 0 410 163

Anyone?

THx

Tom

Don't buy that shit. Get Langka from Bavarian Auto online. It come with everything you need and fills in scratches and pits like no other. I already repaird 2 paint chips. It is not going to be perfect but there is no sanding and the height is smooth like OEM paint. You still need the paint but thats it.

[tl_boy]

Be careful when doing this. I had bumper holes courtesy of my friendly dealer's license plate install. I bought spot putty, 2000 grit sand paper, and BMW Titanium Silber #354 paint and clearcoat set.

First i filled in the holes with spot putty, smoothed it out. Then i sanded it down, then i put touch up paint on the red spot putty areas. Then i sanded, wet sanded, sanded.

long story short, it was a lot of work, and quite frankly, sanding sucks and you may sand down to the bottom revealing bumper/metal. The paint on the e90 is not very thick from my experience.

[Asiann]

The kit I recommended it easy to do and requires no sanding to the bumper. You would be foolish to sand the paint and make a small repair now more costlier than before.