JB4 left in and dealership updating software

tmo24 · 03-09-2011, 12:11 AM

I have a 2007 335i with JB4 and am out of warranty. It ran out last month. I brought the car in today to have the rear brakes checked out and they said they are going to check the sensors to reset the code. Well, I left the JB4 in and on map 0 since I did not have time to take it out. I read somewhere that you can leave it in on map 0 and it will be fine. Keep in mind, I am not in warranty and do not intend on purchasing one. Well, they called me and said that the car needs a software update. And that they tried once and the car did not take it. They are going to try again. Does anyone know if this is because of the JB4? I was able to read a few threads on procedes and having to have it in a certain mode, but couldn't find too much on JB4. Has anyone with JB4 or even JB3 actually left it in and gotten a software update without problems? I think I also left it autoclearing codes. If I would have known that there was a software update happening, I would have postponed the appointment and took out the tune, but had no idea that a software update would be necessary to check the rear sensors.

GQ335i · 03-09-2011, 01:27 AM

I believe you have to set it on Map 0 with Autoclearing OFF.

robbiw1972 · 03-09-2011, 11:15 AM

have you heard back from dealer?

Bimmer335i07 · 03-09-2011, 12:51 PM

Don't think it has anything to do with the JB4. I had the same issue when I took my car in for the new hpfp, injectors and update software. I left the JB4 in on map 0 and they had a problem updating the software. Then they tried it a second time and it worked. Sometimes they just have to update it twice. The same thing happened once before with no tune in.

GL.

WilliamE92 · 03-09-2011, 12:55 PM

You dun goofed

Mike@N54Tuning.com · 03-09-2011, 01:19 PM

BMW has trouble updating ECUs all the time. With map0 the JB4 is fully off. All CAN stuff is off and its on bypass. Map0 isn't a stock "like" map it is stock. For all intents and purposes map0 is like driving without a tune.

I've had many customers get their software updated with the JB3/4 installed (myself included)

Mike

dlbrooks18 · 03-09-2011, 01:22 PM

Since you are almost out of warranty tell them you'll pass on the software update..

pwrdbynel · 03-09-2011, 01:52 PM

I was at the Dealership last week and this the second time they had to update my software. On my first visit I had the JB3 on and the software update failed once and the second time it went through. On my second/recent visit I had the JB4 and it went through the first time. BTW I left the JB4 on map 0.

Litos · 03-09-2011, 02:52 PM

Quote:

Originally Posted by Mike@N54Tuning.com

BMW has trouble updating ECUs all the time. With map0 the JB4 is fully off. All CAN stuff is off and its on bypass. Map0 isn't a stock "like" map it is stock. For all intents and purposes map0 is like driving without a tune.

I've had many customers get their software updated with the JB3/4 installed (myself included)

Mike

holy crap - i didn't know this - seriously.

so now when i take my car to the dealer and i for some reason cannot remove my JB4, i can at least put it on map 0.

tmo24 · 03-09-2011, 08:24 PM

Just got my car back from the dealer. It took the software the second time. He said he had to something special but either way, it worked out and my tune wasn't affected. He didn't say anything at all about it. Left it on map 0 and it was cool. Thanks everyone for your input and advice.

///M3THOD · 03-09-2011, 08:55 PM

Quote:

Originally Posted by WilliamE92

You dun goofed

LOL

Kuch335 · 04-16-2011, 07:20 PM

so, since the method to activate the JB3/4 is pretty much public knowledge, what if your dealer is smart enough to just try those steps to see if one exists ? you would think bmwna would instruct them to do this prior to any major repair.. or are they just not that intelligent

03-09-2011, 12:11 AM	#1
tmo24 Major 139 Rep 1,271 Posts Drives: 2007 BMW 335i e92 Join Date: Aug 2010 Location: Las Vegas iTrader: (3)	JB4 left in and dealership updating software I have a 2007 335i with JB4 and am out of warranty. It ran out last month. I brought the car in today to have the rear brakes checked out and they said they are going to check the sensors to reset the code. Well, I left the JB4 in and on map 0 since I did not have time to take it out. I read somewhere that you can leave it in on map 0 and it will be fine. Keep in mind, I am not in warranty and do not intend on purchasing one. Well, they called me and said that the car needs a software update. And that they tried once and the car did not take it. They are going to try again. Does anyone know if this is because of the JB4? I was able to read a few threads on procedes and having to have it in a certain mode, but couldn't find too much on JB4. Has anyone with JB4 or even JB3 actually left it in and gotten a software update without problems? I think I also left it autoclearing codes. If I would have known that there was a software update happening, I would have postponed the appointment and took out the tune, but had no idea that a software update would be necessary to check the rear sensors. __________________ 2007 335i Jet Black e92 6AT - VRSF Full street exhaust DP, Chargepipe 7.5 FMIC, MHD, XHP, Koni orange/Eibachs, some other stuff 2007 335i Jet Black e90 6MT - Eibachs, magnaflow exhaust, carbon hood, short shift kit, some other random stuff - being sold somewhere sometime soon probably 2010 335i AW e90 6 AT Msport - The GF took this one over... JB4, PE exhaust, Koni yellows/Eibachs, pink badges, fuzzy steering wheel cover ?
	Appreciate 0 Tweet Quote

03-09-2011, 01:27 AM	#2
GQ335i First Lieutenant 18 Rep 368 Posts Drives: BMW M5 (E60) Join Date: Apr 2010 Location: PA/NJ iTrader: (5)	I believe you have to set it on Map 0 with Autoclearing OFF.
	Appreciate 0 Quote

03-09-2011, 11:15 AM	#3
robbiw1972 Robbie 2 Rep 28 Posts Drives: 2010 X6 5.0 Join Date: Nov 2009 Location: Lorton, va iTrader: (0)	have you heard back from dealer?
	Appreciate 0 Quote

03-09-2011, 12:51 PM	#4
Bimmer335i07 BK Employee of the month! / Moderator 636 Rep 15,795 Posts Drives: BMW 335i Sedan Join Date: Apr 2007 Location: ... iTrader: (9) Garage List 2007 335i [0.00]	Don't think it has anything to do with the JB4. I had the same issue when I took my car in for the new hpfp, injectors and update software. I left the JB4 in on map 0 and they had a problem updating the software. Then they tried it a second time and it worked. Sometimes they just have to update it twice. The same thing happened once before with no tune in. GL.
	Appreciate 0 Quote

03-09-2011, 12:55 PM	#5
WilliamE92 First Lieutenant 21 Rep 318 Posts Drives: 2013 EB F30 335 MT Join Date: Aug 2009 Location: CA iTrader: (1)	You dun goofed
	Appreciate 0 Quote

03-09-2011, 01:19 PM	#6
Mike@N54Tuning.com Joint Chiefs of Staff 4918 Rep 115,980 Posts Drives: 2007 335i, 2015 M3 Join Date: Dec 2008 Location: N54tuning.com iTrader: (89)	BMW has trouble updating ECUs all the time. With map0 the JB4 is fully off. All CAN stuff is off and its on bypass. Map0 isn't a stock "like" map it is stock. For all intents and purposes map0 is like driving without a tune. I've had many customers get their software updated with the JB3/4 installed (myself included) Mike
	Appreciate 0 Quote

03-09-2011, 01:22 PM	#7
dlbrooks18 Brigadier General 161 Rep 3,736 Posts Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles iTrader: (2)	Since you are almost out of warranty tell them you'll pass on the software update.. __________________ 2008 E90 335
	Appreciate 0 Quote

03-09-2011, 01:52 PM	#8
pwrdbynel Private First Class 13 Rep 197 Posts Drives: 335i Coupe Join Date: Apr 2008 Location: SoCal iTrader: (1)	I was at the Dealership last week and this the second time they had to update my software. On my first visit I had the JB3 on and the software update failed once and the second time it went through. On my second/recent visit I had the JB4 and it went through the first time. BTW I left the JB4 on map 0.
	Appreciate 0 Quote

03-09-2011, 08:24 PM	#10
tmo24 Major 139 Rep 1,271 Posts Drives: 2007 BMW 335i e92 Join Date: Aug 2010 Location: Las Vegas iTrader: (3)	Just got my car back from the dealer. It took the software the second time. He said he had to something special but either way, it worked out and my tune wasn't affected. He didn't say anything at all about it. Left it on map 0 and it was cool. Thanks everyone for your input and advice. __________________ 2007 335i Jet Black e92 6AT - VRSF Full street exhaust DP, Chargepipe 7.5 FMIC, MHD, XHP, Koni orange/Eibachs, some other stuff 2007 335i Jet Black e90 6MT - Eibachs, magnaflow exhaust, carbon hood, short shift kit, some other random stuff - being sold somewhere sometime soon probably 2010 335i AW e90 6 AT Msport - The GF took this one over... JB4, PE exhaust, Koni yellows/Eibachs, pink badges, fuzzy steering wheel cover ?
	Appreciate 0 Quote

04-16-2011, 07:20 PM	#12
Kuch335 2007 335i E92 44 Rep 624 Posts Drives: 2007 E92 TiAg, 2011 X3 35i Join Date: Mar 2011 Location: OH iTrader: (4)	so, since the method to activate the JB3/4 is pretty much public knowledge, what if your dealer is smart enough to just try those steps to see if one exists ? you would think bmwna would instruct them to do this prior to any major repair.. or are they just not that intelligent __________________ 2007 335i E92 AT - MHD E85 Flash, xHP Stage 3 , MR5 Intake, VRSF DPs, VRSF 7in FMIC, ER CP, Fuel-It Stage 1, RB PCV, UUC Corsa Exhaust, BL R8 Coils, Sachs SRE Coilovers, M3 Control Arms, H&R Sway, BA Diff Lock, MDF Scoops, Tint, CF Hood, Mini Battery :: 2011 X3 xDrive 35i - MHD Stage 1, Alum Charge Pipe
	Appreciate 0 Quote