catless dp install ?

twin3 · 12-01-2013, 12:08 AM

Anyone know a good place for a catless dp install ? Tried turner motorsports but said because its catless they cant do it...also wat type of price quote am I looking at ? Any info would be appreciated thank you

j23a45m · 12-01-2013, 12:15 AM

don't know about your area but, price should be in the $250-300 range and an independent shop/ local installer.

amr_e90 · 12-01-2013, 12:57 AM

call up Rayteam automotive in Waltham and ask for frank. tell him alex sent you. I used to work for him and all we worked on was bmw's and Audi's . He will give u a reasonable price .

alex911 · 12-01-2013, 05:50 AM

The shop in Fall River, Ma that did mine charged me $200!

CSM3 · 12-01-2013, 12:59 PM

I had mine done at German Performance Service. They are very experienced and charged me $300 including new BMW gaskets. Look for Rob and tell him Joel sent you.

I suggest you drop off your car the night before, so they can start work on it first thing in the morning when its cold.

twin3 · 12-01-2013, 02:51 PM

Quote:

Originally Posted by bimmer35

I had mine done at German Performance Service. They are very experienced and charged me $300 including new BMW gaskets. Look for Rob and tell him Joel sent you.

I suggest you drop off your car the night before, so they can start work on it first thing in the morning when its cold.

Ok thank you , il be giving them a call

twin3 · 12-01-2013, 05:18 PM

Quote:

Originally Posted by distracted24x7

Did you already buy the downpipes and are bringing them to Turner or are you buying something they sell?

I am having the CP-E catless DPs bought from and installed at Turner on Friday. The issue is the CEL codes that will be thrown and that your car will fail inspection in this lovely state if you don't have the O2 simulator installed at the same time.

Do you have all that covered and Turner still told you no?

No I bought my dps somewhere else and wanted them to install, how can I get rid of the cel light after instal ?

bimmer72 · 12-02-2013, 12:18 AM

Quote:

Originally Posted by twin3

No I bought my dps somewhere else and wanted them to install, how can I get rid of the cel light after instal ?

Your stage 2 tune should turn off the cel. In order to get an inspection just buy an o2 sim from burger. I've been catless for about 3 years and never had a problem getting a sticker with dps.

twin3 · 12-02-2013, 08:19 AM

Quote:

Originally Posted by bimmer72

Your stage 2 tune should turn off the cel. In order to get an inspection just buy an o2 sim from burger. I've been catless for about 3 years and never had a problem getting a sticker with dps.

Thanks for the info I will looj into the 02 simulator

Hadley · 12-02-2013, 08:51 AM

Quote:

Originally Posted by twin3

Quote:

Originally Posted by bimmer72

Your stage 2 tune should turn off the cel. In order to get an inspection just buy an o2 sim from burger. I've been catless for about 3 years and never had a problem getting a sticker with dps.

Thanks for the info I will looj into the 02 simulator

What engine do you have? Last I checked there is no dp fix available for an n55

twin3 · 12-02-2013, 11:45 AM

Quote:

Originally Posted by Hadley

What engine do you have? Last I checked there is no dp fix available for an n55

I have the n54

Hadley · 12-02-2013, 12:14 PM

Reach out to Tiago at vrsf, he can get you the dp fix and do the install as well

E36graduate · 12-08-2013, 10:47 PM

Quote:

Originally Posted by alex911

The shop in Fall River, Ma that did mine charged me $200!

What shop is in Fall River?

Tiago@VRSF · 12-09-2013, 12:55 PM

Pricing for install generally varies depending on whether you have an XI or RWD model

alex911 · 12-09-2013, 05:19 PM

Quote:

Originally Posted by E36graduate

What shop is in Fall River?

Message me

K19BMW · 12-09-2013, 07:35 PM

Quote:

Originally Posted by Tiago@VRSF

Pricing for install generally varies depending on whether you have an XI or RWD model

what would be an average instal price for n54 xi model?

Tiago@VRSF · 12-09-2013, 07:54 PM

$250-350 for most shops in the area, generally a bit more than RWD DP's.

Mrida335 · 12-11-2013, 03:43 PM

I spoke to Lou's Custom Exhaust and they said they would do mine. Waiting until it gets a little warmer before I go for it... besides Holidays mean less me funds.....

Envuks · 12-15-2013, 03:43 PM

Call theo at banchwerks in providence. Awesome work at great prices

Envuks · 12-15-2013, 03:44 PM

I got mine done at banchwerks and I'm an xi too

12-01-2013, 12:08 AM	#1
twin3 Lieutenant 22 Rep 418 Posts Drives: e92 Join Date: May 2013 Location: Medford iTrader: (1)	catless dp install ? Anyone know a good place for a catless dp install ? Tried turner motorsports but said because its catless they cant do it...also wat type of price quote am I looking at ? Any info would be appreciated thank you
	Appreciate 0 Tweet Quote

12-01-2013, 12:15 AM	#2
j23a45m Captain 44 Rep 696 Posts Drives: 2012 E70 X5 Join Date: Aug 2013 Location: Lancaster, Pa iTrader: (9) Garage List 2016 Jeep grand che ... [0.00] 2016 S1000RR [0.00] 2012 Bmw X5 35i [0.00]	don't know about your area but, price should be in the $250-300 range and an independent shop/ local installer. __________________ 2011 BSM 335i E90 MTECH 6MT • JB4 stage 2 iso 5.3 FF wire• BMS Intake • Vishnu DP • Cyba Scoops • LUX V4 • 6000K Headlight/Fog light Philips Ultinon • Euro headlight switch • ACS roof wing • 35% tint • Performance Grilles • Misc coding • Cobb charge pipe • ///M3 fenders • 335is pedals • BC Coilovers • Vrsf 7" IC • ///M3 mirrors •
	Appreciate 0 Quote

12-01-2013, 12:57 AM	#3
amr_e90 Captain 203 Rep 801 Posts Drives: e90 335xi 6mt Join Date: Apr 2012 Location: boston,Ma iTrader: (2)	call up Rayteam automotive in Waltham and ask for frank. tell him alex sent you. I used to work for him and all we worked on was bmw's and Audi's . He will give u a reasonable price . __________________ 14 M5 / comp / CCBs / alpine white PG intakes Evolve tune Switzer exhaust Fabworx pipes
	Appreciate 0 Quote

12-01-2013, 05:50 AM	#4
alex911 New Member 1 Rep 27 Posts Drives: 2011 e90 Mtech Join Date: Nov 2013 Location: northeast iTrader: (0)	The shop in Fall River, Ma that did mine charged me $200!
	Appreciate 0 Quote

12-01-2013, 12:59 PM	#5
CSM3 Captain 130 Rep 645 Posts Drives: E86 Z4M, F80 M3CS Join Date: Sep 2011 Location: MA iTrader: (8)	I had mine done at German Performance Service. They are very experienced and charged me $300 including new BMW gaskets. Look for Rob and tell him Joel sent you. I suggest you drop off your car the night before, so they can start work on it first thing in the morning when its cold.
	Appreciate 0 Quote

12-02-2013, 12:14 PM	#12
Hadley Major 254 Rep 1,033 Posts Drives: 2011 E90 M Sport Join Date: Jan 2011 Location: MA iTrader: (5) Garage List 2011 BMW 335xi [10.00]	Reach out to Tiago at vrsf, he can get you the dp fix and do the install as well
	Appreciate 0 Quote

12-09-2013, 12:55 PM	#14
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	Pricing for install generally varies depending on whether you have an XI or RWD model
	Appreciate 0 Quote

12-09-2013, 07:54 PM	#17
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	$250-350 for most shops in the area, generally a bit more than RWD DP's.
	Appreciate 0 Quote

12-11-2013, 03:43 PM	#18
Mrida335 Private First Class 88 Rep 135 Posts Drives: E90 335xi Join Date: Apr 2013 Location: Boston, Ma iTrader: (0)	I spoke to Lou's Custom Exhaust and they said they would do mine. Waiting until it gets a little warmer before I go for it... besides Holidays mean less me funds..... __________________ Current Garage 2018 M3 ZCP - Sakhir Orange 2019 x3 M40 - Glacier Silver 2002 745i - Kalahari Beige
	Appreciate 0 Quote

12-15-2013, 03:43 PM	#19
Envuks Captain 26 Rep 741 Posts Drives: '08 e92 335xi Join Date: Apr 2012 Location: MA iTrader: (2)	Call theo at banchwerks in providence. Awesome work at great prices __________________ Jet black e92 6mt 335xi: 18" BBS RGRs, KW v1, ESS Stage 2 flash, VRSF 7" FMIC, VRSF downpipes, JG Mods m-tech front, mtec V3 AEs, BMS OCC, hardwired valentine 1, p3cars gauge, amber delete, sport seats, factory oil cooler.
	Appreciate 0 Quote

12-15-2013, 03:44 PM	#20
Envuks Captain 26 Rep 741 Posts Drives: '08 e92 335xi Join Date: Apr 2012 Location: MA iTrader: (2)	I got mine done at banchwerks and I'm an xi too __________________ Jet black e92 6mt 335xi: 18" BBS RGRs, KW v1, ESS Stage 2 flash, VRSF 7" FMIC, VRSF downpipes, JG Mods m-tech front, mtec V3 AEs, BMS OCC, hardwired valentine 1, p3cars gauge, amber delete, sport seats, factory oil cooler.
	Appreciate 0 Quote