VRSF Exhaust Installed. Pictures Inside

3000GT MR · 06-07-2013, 11:31 PM

well I got a new camera and mount so i took the best video i could. Sorry about my voice, Ive been yelling at the TV for the last 2 hours watching my Bruins. Its at night so there isnt much to see but it has good audio. I hope this ends the video request's. Hope you like it.

Tiago@VRSF · 06-08-2013, 08:53 AM

Great video man, thanks a ton for taking the time

dlbrooks18 · 06-08-2013, 12:44 PM

Great sound!

robc1976 · 06-08-2013, 01:09 PM

Quote:

Originally Posted by dlbrooks18

Great sound!

I am seriously considering this, trying to decide if it is aggressive enough.

3000GT MR · 06-08-2013, 03:34 PM

No problem guys. I have a few PMs about mods. As it stands in the video the current mods are as follows.
Afe stage 2
Procede (18.5psi)
Vrsf cat back
Meth
Intercooler
And a bunch of misc items that won't effect exhaust

Camera is a Nikkon aw110 with wind noise reduction enabled . Which obviously works great and better than expected for me.

dfjaws · 06-08-2013, 05:35 PM

Quote:

Originally Posted by robc1976

I am seriously considering this, trying to decide if it is aggressive enough.

I'm in the same boat as you but I'd imagine, with catless downpipes, it would be a little more aggressive.

robc1976 · 06-08-2013, 05:53 PM

So no

Quote:

Originally Posted by 3000GT MR

No problem guys. I have a few PMs about mods. As it stands in the video the current mods are as follows.
Afe stage 2
Procede (18.5psi)
Vrsf cat back
Meth
Intercooler
And a bunch of misc items that won't effect exhaust

Camera is a Nikkon aw110 with wind noise reduction enabled . Which obviously works great and better than expected for me.

so no kitty less pipes? This system replaces from dps back correct?

3000GT MR · 06-08-2013, 05:58 PM

Quote:

Originally Posted by robc1976

So no

Quote:

Originally Posted by 3000GT MR

No problem guys. I have a few PMs about mods. As it stands in the video the current mods are as follows.
Afe stage 2
Procede (18.5psi)
Vrsf cat back
Meth
Intercooler
And a bunch of misc items that won't effect exhaust

Camera is a Nikkon aw110 with wind noise reduction enabled . Which obviously works great and better than expected for me.

so no kitty less pipes? This system replaces from dps back correct?

Yup. That's with kittens installed. I won't have any in between. Hopefully if i ever get this turbo back from FFTec i can install the whole kit next weekend

robc1976 · 06-08-2013, 05:58 PM

Quote:

Originally Posted by dfjaws

I'm in the same boat as you but I'd imagine, with catless downpipes, it would be a little more aggressive.

I wonder with my RB'S and miss if it would be aggressive...I have my fully catless/muffler delete system sounding pretty damn good, no drone and not much rasp. Will say the vid sounded great...hard decision! Such a great price!

psmitty95 · 06-08-2013, 06:16 PM

I'll have some catless video's for you guys soon! Exhaust came in today and dropped it off at the shop to have that installed along with a bunch of other stuff. Picking it up next weekend. I'll take a quick video when I get it but i'm gonna wait for a long video until it's fully broken in. New tips do look awesome though

Edit: Also just a heads up that's not the normal y-pipe. Tiago ran out of stock so instead of waiting for one to come he sent me the one they used to test fit the exhaust so I wouldn't have to wait. I have to wait anyway so I guess there was no point but that's why there's a discoloration

robc1976 · 06-08-2013, 06:48 PM

Quote:

Originally Posted by psmitty95

I'll have some catless video's for you guys soon! Exhaust came in today and dropped it off at the shop to have that installed along with a bunch of other stuff. Picking it up next weekend. I'll take a quick video when I get it but i'm gonna wait for a long video until it's fully broken in. New tips do look awesome though

Edit: Also just a heads up that's not the normal y-pipe. Tiago ran out of stock so instead of waiting for one to come he sent me the one they used to test fit the exhaust so I wouldn't have to wait. I have to wait anyway so I guess there was no point but that's why there's a discoloration

it is pretty amazing the quality you get for the price

psmitty95 · 06-08-2013, 06:53 PM

Quote:

Originally Posted by robc1976

it is pretty amazing the quality you get for the price

Yea I know. The tips look awesome in person with the laser etching

skyguy · 06-08-2013, 08:16 PM

So far sounds good, v1 with vrsf DPs. I'll get a video when my car is done with this round of installs.

robc1976 · 06-09-2013, 02:25 AM

Quote:

Originally Posted by 3000GT MR

well I got a new camera and mount so i took the best video i could. Sorry about my voice, Ive been yelling at the TV for the last 2 hours watching my Bruins. Its at night so there isnt much to see but it has good audio. I hope this ends the video request's. Hope you like it.

How much louder than stock would you gauge this?

3000GT MR · 06-09-2013, 08:34 AM

Quote:

Originally Posted by robc1976

Quote:

Originally Posted by 3000GT MR

well I got a new camera and mount so i took the best video i could. Sorry about my voice, Ive been yelling at the TV for the last 2 hours watching my Bruins. Its at night so there isnt much to see but it has good audio. I hope this ends the video request's. Hope you like it.

How much louder than stock would you gauge this?

Low rpms is say 40-60% louder/deeper. Higher rpm id say 25% over stock but that's gauging from inside the car can't vouch for outside

robc1976 · 06-09-2013, 12:32 PM

Quote:

Originally Posted by 3000GT MR

Low rpms is say 40-60% louder/deeper. Higher rpm id say 25% over stock but that's gauging from inside the car can't vouch for outside

lower RPMS are what matter most, I have a muffler delete wich is pretty loud....just don't like quite exhaust lol! I think with me having over 500 Hp will sound pretty good with this exhaust. It is $1,800 less than the one I was looking at

robc1976 · 06-09-2013, 12:42 PM

Quote:

Originally Posted by Tiago@VRSF

Great video man, thanks a ton for taking the time

pm me best price shipped to 62236....can I get burnt tips or black tips?

alexx03 · 06-09-2013, 01:40 PM

Quote:

Originally Posted by turborevdboy11

Video???

click it

psmitty95 · 06-09-2013, 10:36 PM

Quote:

Originally Posted by alexx03

click it

I think that sounds pretty good... Any chance you can have someone hold the camera and post a video driving away doing like a 1st-3rd pull?

robc1976 · 06-09-2013, 10:55 PM

Quote:

Originally Posted by alexx03

click it

Won't work for me...click it and I go to photobucket and no vid?

nitehawk · 06-09-2013, 10:55 PM

Quote:

Originally Posted by skyguy

So far sounds good, v1 with vrsf DPs. I'll get a video when my car is done with this round of installs.

OT, but where are those toe arms from?

TurboSid · 06-10-2013, 10:08 AM

finally got my downpipes and exhaust done. Will post up some vids soon

06-07-2013, 11:31 PM	#375
3000GT MR Major 265 Rep 1,392 Posts Drives: 09 335i/3000gt vr4 Join Date: Jun 2012 Location: Sav GA iTrader: (6)	well I got a new camera and mount so i took the best video i could. Sorry about my voice, Ive been yelling at the TV for the last 2 hours watching my Bruins. Its at night so there isnt much to see but it has good audio. I hope this ends the video request's. Hope you like it. __________________ Have a single turbo and/or tired of burning up O2 sensors? Ask me about the new ADV O2 sensor retro kits! 335i 2010 e92 M-sport Mods: VM Top mount 6466, Aquamist HSF4 w/custom direct port. VRSF IC + Exhaust 335i 2009 e90 665RWHP VFF900 ST RIP .
	Appreciate 0 Quote

06-08-2013, 08:53 AM	#376
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	Great video man, thanks a ton for taking the time
	Appreciate 0 Quote

06-08-2013, 12:44 PM	#377
dlbrooks18 Brigadier General 161 Rep 3,736 Posts Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles iTrader: (2)	Great sound! __________________ 2008 E90 335
	Appreciate 0 Quote

06-08-2013, 03:34 PM	#379
3000GT MR Major 265 Rep 1,392 Posts Drives: 09 335i/3000gt vr4 Join Date: Jun 2012 Location: Sav GA iTrader: (6)	No problem guys. I have a few PMs about mods. As it stands in the video the current mods are as follows. Afe stage 2 Procede (18.5psi) Vrsf cat back Meth Intercooler And a bunch of misc items that won't effect exhaust Camera is a Nikkon aw110 with wind noise reduction enabled . Which obviously works great and better than expected for me. __________________ Have a single turbo and/or tired of burning up O2 sensors? Ask me about the new ADV O2 sensor retro kits! 335i 2010 e92 M-sport Mods: VM Top mount 6466, Aquamist HSF4 w/custom direct port. VRSF IC + Exhaust 335i 2009 e90 665RWHP VFF900 ST RIP .
	Appreciate 0 Quote

06-08-2013, 06:16 PM	#384
psmitty95 Brigadier General 578 Rep 4,393 Posts Drives: '23 M340i xDrive Join Date: Jan 2012 Location: Boston, MA iTrader: (11)	I'll have some catless video's for you guys soon! Exhaust came in today and dropped it off at the shop to have that installed along with a bunch of other stuff. Picking it up next weekend. I'll take a quick video when I get it but i'm gonna wait for a long video until it's fully broken in. New tips do look awesome though Edit: Also just a heads up that's not the normal y-pipe. Tiago ran out of stock so instead of waiting for one to come he sent me the one they used to test fit the exhaust so I wouldn't have to wait. I have to wait anyway so I guess there was no point but that's why there's a discoloration __________________ < Click picture for photoshoot E90 335i xDrive 6spd, Nav, Prem, Cold Weather, & Sports package - Msport Conversion Mods: JB4 + MHD, Doc Race ST, Pure 6266, AD-Eng PI/Mounts, Fuel-It st. 3, Custom Exhaust, Tuned by TwistedTuning More Pictures: Build Thread /// 683AWHP/675AWTQ
	Appreciate 0 Quote

06-08-2013, 08:16 PM	#387
skyguy Private 2 Rep 93 Posts Drives: 2007 e90 335i 6MT Join Date: May 2012 Location: NH iTrader: (0)	So far sounds good, v1 with vrsf DPs. I'll get a video when my car is done with this round of installs. Attached Images
	Appreciate 0 Quote

06-10-2013, 10:08 AM	#396
TurboSid Brigadier General 1112 Rep 3,261 Posts Drives: 2022 M4Cx BSM/FR Join Date: Apr 2008 Location: Florida iTrader: (4) Garage List 2008 335i [0.00]	finally got my downpipes and exhaust done. Will post up some vids soon __________________ 2022 BSM/FR M4 Competition X-Drive 2017 MW/SO M4 ZCP [SOLD] • 2015 MW/SO M4 M-DCT FBO [SOLD] • 2011 AW/CR 335is DCT FBO [SOLD] • 2008 AW/CR 335i 6MT FBO [SOLD]
	Appreciate 0 Quote