E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > heat issue???



Reply
 
Thread Tools Search this Thread
      04-06-2011, 11:33 AM   #1
klaasjoe
Enlisted Member
4
Rep
47
Posts

Drives: 2007 bmw 335i sedan
Join Date: Mar 2011
Location: los angeles

iTrader: (1)

heat issue???

Hey guys pretty new here and just started modding my 07 335. last month I put on the jb4 with no issues and running map 1 which raises the boost a little. Yesterday I did an afe intake and cpe/tial bov and it seemed like after I installed it and drove the car the temps went up about 20 degrees??? I dont really remember what they were before but now it is like 230-240. I am pretty sure it was running at 220 or less before. Any advice would be greatly appreciated
__________________
2007 335I sedan (jb4,tial bov,afe intake)
01 cobra (novi 2000,nos,aftercooler,550rwp)
92 supra (1jz,regulus body kit 353 rwhp)
99 disco2 dd
93 probe
Appreciate 0
      04-06-2011, 11:50 AM   #2
phazedkid
e92
4
Rep
391
Posts

Drives: e92
Join Date: May 2007
Location: Bay Area

iTrader: (14)

maybe it's hotter in LA recently than it was a month ago? Or maybe now you run your car harder to hear all the glorious noises your intake/bov make? Or maybe you did a couple of hard pulls, which will raise your engine temp higher than if you were just cruising?

it's hard to point to one factor without holding everything else constant. but 230-240 is well within the n54's normal operating temperature, especially in warm/hot weather. So I don't really think you have much to worry about here.
Appreciate 0
      04-06-2011, 02:36 PM   #3
klaasjoe
Enlisted Member
4
Rep
47
Posts

Drives: 2007 bmw 335i sedan
Join Date: Mar 2011
Location: los angeles

iTrader: (1)

thanks for the advice....Are there any cooling mods besides the oil cooler. I cant seem to find any radiators or fan upgrades???
__________________
2007 335I sedan (jb4,tial bov,afe intake)
01 cobra (novi 2000,nos,aftercooler,550rwp)
92 supra (1jz,regulus body kit 353 rwhp)
99 disco2 dd
93 probe
Appreciate 0
      04-06-2011, 02:39 PM   #4
blacknbean
Major
14
Rep
1,044
Posts

Drives: e92 335i 6MT
Join Date: Jul 2007
Location: LA

iTrader: (2)

240 is right in the middle and 100% normal. when you get close to 300 thats when the ECU starts complaining and will put the car in limp mode before you can damage anything. nothing to worry about.
Appreciate 0
      04-06-2011, 02:44 PM   #5
Bobble
Major
Bobble's Avatar
No_Country
56
Rep
1,232
Posts

Drives: Whatever POS the wife leaves
Join Date: Oct 2008
Location: SoCal

iTrader: (1)

BMW power pack includes an extra radiator and cooling pieces but that's part of the package. MR 5 was toying with retrofitting just the cooling bits but not sure how far or what success he's had with so I defer to him. At one time I thought I remember AMS bringing an upgraded radiator to the platform but have not seen that either so hit either of those two sources up. BTW the temps you are referring to on the gauge cluster are oil temps which I assume you knew so to get cooling temps to read out you'd need the performance wheel or be data logging and displaying which your JB can do for you.
Appreciate 0
      04-06-2011, 02:51 PM   #6
jdbretz
Captain
jdbretz's Avatar
50
Rep
923
Posts

Drives: '18 X5d, '12 M3 ZCP, '12 F30
Join Date: Dec 2010
Location: FL Panhandle

iTrader: (10)

Quote:
Originally Posted by klaasjoe View Post
thanks for the advice....Are there any cooling mods besides the oil cooler. I cant seem to find any radiators or fan upgrades???
The temperature you seeing is not your coolant temp, it is your oil temp. You don't need any radiator/fan upgrade. That is why you can't find any because they are not necessary for daily driving. The stock ones are effective. If you plan on tracking your car, you may consider upgrading your oil cooler (assuming you have the stock one install). If you don't have a stock oil cooler, and you are seeing oil temps consistantly around 270 or above, then you probably want to consider buying one if you plan on pushing the car.
Appreciate 0
      04-06-2011, 03:30 PM   #7
Jeff@TopGearSolutions
Jeff@TopGearSolutions's Avatar
United_States
3441
Rep
79,212
Posts

Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com

iTrader: (37)

230-240 is normal operating temp
Appreciate 0
      04-06-2011, 03:40 PM   #8
marv85
Colonel
marv85's Avatar
70
Rep
2,626
Posts

Drives: '07 E92 335i MT
Join Date: Jun 2010
Location: Bay Area

iTrader: (7)

What you're seeing is not excessive... and probably you're pushing your car harder
__________________
'07 E92 335i 6MT- HP650, inlets/outlets, ER FMIC, VRSF CP, LPFP stg2, CSF rad, 'is Aux rad, ER OC, Ohlins, M control arms, eibach front sway bar.
'05 C55 AMG
SOLD - '22 Tesla M3P | '10 E92 335i M, 6MT COBB, FBO, st2 LPFP, Mfactory LSD | '07 E90 335i, PTF COBB E50, FBO, HFS4
Appreciate 0
      04-06-2011, 04:09 PM   #9
klaasjoe
Enlisted Member
4
Rep
47
Posts

Drives: 2007 bmw 335i sedan
Join Date: Mar 2011
Location: los angeles

iTrader: (1)

Sweet thanks for all the advice you put my mind at ease. I will log it with my jb. totally forgot about that feature. sorry for the lame question but all my other cars the temp needle always stays at halfway so when I saw it yesterday i was freakin out since it is my wifes dd
__________________
2007 335I sedan (jb4,tial bov,afe intake)
01 cobra (novi 2000,nos,aftercooler,550rwp)
92 supra (1jz,regulus body kit 353 rwhp)
99 disco2 dd
93 probe
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:37 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST