[wtfangry]

Please someone post a list of all the DVDs of a complete isis/ispi 3.1 system.
Thank you in advance.

[wtfangry]

ISIS Wipe DVD 3.1
ISIS Install 3.1 DVD
ISSS Base DVD 3.1
ISPS Full Install DVD 3.1
ISPI ITools Update V3.1
ISTAD DVD 3.38
ISTAP DVD 50.0

[wtfangry]

Advancing well , the ibase is registered and all lights are green

[wtfangry]

iTools DvDs got installed with no problem

What is the next step? making an isss or isps ?? when do i install ista / istap

[wtfangry]

did first tests on isps and isid ... not so good
isps is asking for user name and password that dont coincide with isis (maybe because was not connected to isis when i created it)
isid doesn't like native install on laptop, can make it as VM but not communicating with isis

anyone that can give some info?

[wtfangry]

After few week of testing and installing over and over again i have learned a lot about the system , first is that you need bios for isis and isps if you don't want to mod a lot of files.
The order in which you must install the software is crucial (even if it seems that the software works properly a service might not start if is not installed in the right order).
You have to read lots of log's and must know some programming in java ,c/c++.
After 2 months 3.1 is finally done,now Rheingold is my new project , i do hope i won't take me another 2 moths to make it.

[wtfangry]

please can someone share a license for rheingold ?or is there a way to make it work with out license?

[Sensible_]

Originally Posted by wtfangry

please can someone share a license for rheingold ?or is there a way to make it work with out license?

How about sharing your installation files, then maybe a patch can be developed which bypasses license check...

[wtfangry]

yes i'm on it now , i know what needs to be done there are two ways to do it

[alexxx123]

Originally Posted by Sensible_

How about sharing your installation files, then maybe a patch can be developed which bypasses license check...

Unfortunately, I had already removed the license, because any change hardware, no license is being tested. (I tried to run the image of another PC with installed and activated program)
In version 3.38 is responsible for checking the license file RheingoldCoreFramework.dll.
In the same file if you open it with any hex editor there are a few samples of licenses, ie from what it should consist of.

[wtfangry]

i try and mod RheingoldCoreFramework.dll , not advancing to good

[Sensible_]

Originally Posted by wtfangry

i try and mod RheingoldCoreFramework.dll , not advancing to good

I'll try take a look in the next couple of days

[Sensible_]

So here is what you asked my friend? Note License screenshot. Looking for beta testers - please PM me. Version is 3.39 Rheingold

For those who want to activate their own copy. Just open RheingoldCoreFramework.dll - deobfustcate code - find the license routine and inject your own code. Its not so hard.

[Sensible_]

As you can see, Rheingold can use DCAN USB cable (Omnitec) natively. No emulator needed!

[wtfangry]

grate job

[Sir Pommes]

Hi,


as the ISTA 2.x is not supported anymore i updated my ISID to 3.39 via ISIS but now i stuck at the licensing.
Does you dll also work on a ISID?

Actually the ISID 3.39 is just another Rheingold installation on a windows based device + some WSM and Jetstream software i think.
So i hope it´ll work at the ISID too.


regards SP

[Sensible_]

Of course it works

[Sir Pommes]

Originally Posted by Sensible_

Of course it works

I tried to send a pm but you message box is full.

SP

[AlexSSS]

no licensed version 3.40?