Shop recommendations

tantrumspeed · 02-11-2012, 10:12 AM

Looking for a shop that can do performance work as well as vehicle Maintenance. Also looking for a shop that can work with JB4 as well. Been to a couple of local shops here and there but I'm not impressed with anything I've seen nor was I really satisified with their work. Also looking for a shop that has the right scanner tools that can verify coding that can give me a straight answer as opposed to run arounds, if any suggestions can be made, it will be helpful.

Current Vehicle set up:

2007 335i Coupe
HKS Legamax Titanium exhaust
Cat-less down pipes
JB4
Customer JMR Smax Front mount intercooler
Injen DCI intake
Active Autowerke BOV

KW Variant 2 coilovers
19 Work Gnosis wheels

Busa1 · 02-11-2012, 10:19 AM

I always hear good things about this shop:
http://www.motorcepts.com/

D335NUTZ · 02-11-2012, 12:16 PM

if you dont mind driving to Fairlawn in NJ ACM is an excellent shop for your BMW. They have certified BMW Master Techs working there and the shop is very impressive.

Where in flushing are you? I'm in Fresh meadows.

tantrumspeed · 02-11-2012, 01:26 PM

Quote:

Originally Posted by Wilazn

if you dont mind driving to Fairlawn in NJ ACM is an excellent shop for your BMW. They have certified BMW Master Techs working there and the shop is very repressive.

Where in flushing are you? I'm in Fresh meadows.

I'm in Fresh Meadows as well lol same color car too

D335NUTZ · 02-11-2012, 01:31 PM

Quote:

Originally Posted by tantrumspeed

I'm in Fresh Meadows as well lol same color car too

oh snap

tantrumspeed · 02-11-2012, 01:33 PM

Quote:

Originally Posted by Wilazn

oh snap

LOL surprised we never ran in to each other... u got any parts for sale lol... i guess i'm considered a local pick up

markeh · 02-11-2012, 01:35 PM

ACM is definitely worth the drive, almost everyone on this forum will tell you that

getrich · 02-11-2012, 01:38 PM

Quote:

Originally Posted by tantrumspeed

Looking for a shop that can do performance work as well as vehicle Maintenance. Also looking for a shop that can work with JB4 as well. Been to a couple of local shops here and there but I'm not impressed with anything I've seen nor was I really satisified with their work. Also looking for a shop that has the right scanner tools that can verify coding that can give me a straight answer as opposed to run arounds, if any suggestions can be made, it will be helpful.

Current Vehicle set up:

2007 335i Coupe
HKS Legamax Titanium exhaust
Cat-less down pipes
JB4
Customer JMR Smax Front mount intercooler
Injen DCI intake
Active Autowerke BOV

KW Variant 2 coilovers
19 Work Gnosis wheels

the best mod for your car is a 1 gallon jug of gasoline and a pack of matches, BITCH!

... are we goin drinking tonight btw?

D335NUTZ · 02-11-2012, 01:43 PM

Quote:

Originally Posted by tantrumspeed

LOL surprised we never ran in to each other... u got any parts for sale lol... i guess i'm considered a local pick up

i've always got parts for sale lol. to bad you werent on here sooner. i already went thru 3 bumpers.

SMOKE EM IF U GOT EM!! · 02-11-2012, 04:03 PM

Quote:

Originally Posted by getrich

the best mod for your car is a 1 gallon jug of gasoline and a pack of matches, BITCH!

... are we goin drinking tonight btw?

tantrumspeed · 02-11-2012, 04:32 PM

Quote:

Originally Posted by getrich

the best mod for your car is a 1 gallon jug of gasoline and a pack of matches, BITCH!

... are we goin drinking tonight btw?

AHAHAHHA I WAS LIKE Who da? lol I'll text you when i get off work

tantrumspeed · 02-11-2012, 04:33 PM

Quote:

Originally Posted by Wilazn

i've always got parts for sale lol. to bad you werent on here sooner. i already went thru 3 bumpers.

dammn, i need a front bumper, just picked up my mtech rear... lemme know if you got anything, i'm always interested...

getrich · 02-11-2012, 04:34 PM

Quote:

Originally Posted by tantrumspeed

AHAHAHHA I WAS LIKE Who da? lol I'll text you when i get off work

is this what you do at work all day long?

tantrumspeed · 02-11-2012, 04:43 PM

Quote:

Originally Posted by getrich

is this what you do at work all day long?

nah but that check engine/limp mode is stressing me out... you jinxed me focker

getrich · 02-11-2012, 04:51 PM

Quote:

Originally Posted by tantrumspeed

nah but that check engine/limp mode is stressing me out... you jinxed me focker

i told u, if all else fails, there is always 1 gallon jug of gasoline and a pack of matches to fix your problems

tantrumspeed · 02-11-2012, 05:24 PM

Sounds like ACM has a very good reputation, does anyone have a contact there that I can speak with? thanks so much

D335NUTZ · 02-11-2012, 05:56 PM

Quote:

Originally Posted by tantrumspeed

Sounds like ACM has a very good reputation, does anyone have a contact there that I can speak with? thanks so much

send Sal@AUTOcouture a pm on this forum. or you can call them up:

15-01 Pollitt Drive #6 | Fair Lawn, NJ 07642 | P: 201.666.3500 | Sal@autocouturemotoring.com

http://www.e90post.com/forums/showth...=350239&page=1

02-11-2012, 10:12 AM	#1
tantrumspeed Private First Class 3 Rep 101 Posts Drives: 07 335i Coupe Join Date: Jan 2011 Location: Flushing, NY iTrader: (2)	Shop recommendations Looking for a shop that can do performance work as well as vehicle Maintenance. Also looking for a shop that can work with JB4 as well. Been to a couple of local shops here and there but I'm not impressed with anything I've seen nor was I really satisified with their work. Also looking for a shop that has the right scanner tools that can verify coding that can give me a straight answer as opposed to run arounds, if any suggestions can be made, it will be helpful. Current Vehicle set up: 2007 335i Coupe HKS Legamax Titanium exhaust Cat-less down pipes JB4 Customer JMR Smax Front mount intercooler Injen DCI intake Active Autowerke BOV KW Variant 2 coilovers 19 Work Gnosis wheels
	Appreciate 0 Tweet Quote

02-11-2012, 10:19 AM	#2
Busa1 Captain 275 Rep 799 Posts Drives: M4 and 435i xDrive M-Sport Join Date: Feb 2011 Location: East Coast iTrader: (4)	I always hear good things about this shop: http://www.motorcepts.com/
	Appreciate 0 Quote

02-11-2012, 12:16 PM	#3
D335NUTZ The Blue Beast 142 Rep 5,665 Posts Drives: 2008 E92 335xi in Montego Blue Join Date: Jan 2011 Location: Queens, New York iTrader: (8)	if you dont mind driving to Fairlawn in NJ ACM is an excellent shop for your BMW. They have certified BMW Master Techs working there and the shop is very impressive. Where in flushing are you? I'm in Fresh meadows. __________________ Cobb AP Stage 2+ \| BMS DCI \| UR Catless DP \| UR Chargepipe \| Tial BV 50mm \| BSH OCC \| ETS FMIC \| Eisenmann Race Exhaust \| KWv1 Coilovers \| Volk TE37 TC Kline Ed. Last edited by D335NUTZ; 02-11-2012 at 01:30 PM..
	Appreciate 0 Quote

02-11-2012, 01:35 PM	#7
markeh Second Lieutenant 12 Rep 219 Posts Drives: 2013 CB 650xi GC Join Date: Sep 2010 Location: Fort Lee, NJ iTrader: (0)	ACM is definitely worth the drive, almost everyone on this forum will tell you that
	Appreciate 0 Quote

02-11-2012, 05:24 PM	#16
tantrumspeed Private First Class 3 Rep 101 Posts Drives: 07 335i Coupe Join Date: Jan 2011 Location: Flushing, NY iTrader: (2)	Sounds like ACM has a very good reputation, does anyone have a contact there that I can speak with? thanks so much
	Appreciate 0 Quote