[speedimage69]

Has anyone try these spring clip? any review? can this be replacement for the OEM c-clip on the throttle body and charge pipe?

I will be switching Riss Racing charge pipe to ER CP, however, don't have the original c-clip no more, and dealership said the c-clip doesn't sell separately and require to buy a new air filter intake system. And not able to find a used one.....

http://www.ecstuning.com/BMW-E92-335i-N54_3.0l/Engine/Intercooler/ES39182/

[Wedge1967]

Doesn't sound like you have much choice. It looks nice. Good luck and let us know how it works out.

[cn555ic]

Looks like it a perfect match except it looks to be made of copper plated color

[bigdnno98]

This is really your only choice. I never knew this existed. I bought a used CP just to get the C Clip.

[joec500]

Originally Posted by cn555ic

Looks like it a perfect match except it looks to be made of copper plated color

Shoot...it's close enough from what I can tell from the pictures, and if not, I am sure a little bending is all you need to make it work. NICE FIND!

[Jeller]

ECS's site says that is for the intercooler inlet/outlets. Charge pipe clip is bigger correct?

[cwarren]

alot bigger if i remember right ..

[speedimage69]

Is the O-ring supplement of c-clip? See below link for number 26

http://www.realoem.com/bmw/showparts...57&hg=13&fg=20





No. Description Supplement Qty From Up To Part Number Price Notes Photo
01 Air duct without mass airflow sensor 1 13717599286
02 Hot-film air mass meter 1 13627593624
03 O-ring 1 13627532318 $3.11
04 Torx screw 2 13627531817 $0.60
06 Rubber Mounting 2 13717593170
07 Sleeve 2 13717593171
09 Hose clamp 1 13717599289
10 Hose clamp D= 65-72MM 2 11617786528 $5.09
11 Hex bolt 1 07149218232
12 Hex bolt with washer M6X25-U2-ZNS3 1 07119902911 $0.65
13 Hex nut with plate AM6-8-ZNNIV SI 1 07129904553 $0.64
14 Air duct, bottom 1 13717599290
15 Gasket 1 13717599291
16 Charge air induction tract 1 13717599293
17 Preformed seal 1 11617791470 $8.20
18 Charge air induction tract 1 13717590304 $194.37
19 Preformed seal 1 11617791469 $6.65
22 Bracket, charge-air ducting 1 13717599296
23 Charge air induction tract 1 03/2011 13717599294
23 Charge air induction tract 1 03/2011 13717615026
24 Pressure sensor 1 03/2011 13627585493
24 Pressure sensor 1 03/2011 13627599042
25 Fillister head screw TS 5X16 2 51417067920 $0.39
26 O-ring 1 13717568031 $3.75
27 Plug, see part information in 'ZI' colum 1 61133333333 $12.24
28 Plug, see part information in 'ZI' colum 1 61133333333 $12.24
29 Gasket 1 13717599292

[joec500]

Originally Posted by speedimage69

Is the O-ring supplement of c-clip? See below link for number 26

http://www.realoem.com/bmw/showparts...57&hg=13&fg=20





No. Description Supplement Qty From Up To Part Number Price Notes Photo
01 Air duct without mass airflow sensor 1 13717599286
02 Hot-film air mass meter 1 13627593624
03 O-ring 1 13627532318 $3.11
04 Torx screw 2 13627531817 $0.60
06 Rubber Mounting 2 13717593170
07 Sleeve 2 13717593171
09 Hose clamp 1 13717599289
10 Hose clamp D= 65-72MM 2 11617786528 $5.09
11 Hex bolt 1 07149218232
12 Hex bolt with washer M6X25-U2-ZNS3 1 07119902911 $0.65
13 Hex nut with plate AM6-8-ZNNIV SI 1 07129904553 $0.64
14 Air duct, bottom 1 13717599290
15 Gasket 1 13717599291
16 Charge air induction tract 1 13717599293
17 Preformed seal 1 11617791470 $8.20
18 Charge air induction tract 1 13717590304 $194.37
19 Preformed seal 1 11617791469 $6.65
22 Bracket, charge-air ducting 1 13717599296
23 Charge air induction tract 1 03/2011 13717599294
23 Charge air induction tract 1 03/2011 13717615026
24 Pressure sensor 1 03/2011 13627585493
24 Pressure sensor 1 03/2011 13627599042
25 Fillister head screw TS 5X16 2 51417067920 $0.39
26 O-ring 1 13717568031 $3.75
27 Plug, see part information in 'ZI' colum 1 61133333333 $12.24
28 Plug, see part information in 'ZI' colum 1 61133333333 $12.24
29 Gasket 1 13717599292

The clip is part of #23, it's included with the Stock Chargepipe, you cannot buy the clip separately from the dealer.

[Laguna Seca Blue]

Haha Speedimage and I had a phone conversation about this this morning. We weren't able to figure it out so I guess we both came on here and asked the same question in two separate threads! Lol.

[jbarzelatto]

I need a clip too, but its for the charge air induction. the clip that united the turbo outlet, and the plastic tube that goes to the intercooler. but look at this picture attached, it seems this clip is different right?any one have this clip?

[N55Jamaican]

Originally Posted by speedimage69

Has anyone try these spring clip? any review? can this be replacement for the OEM c-clip on the throttle body and charge pipe?

I will be switching Riss Racing charge pipe to ER CP, however, don't have the original c-clip no more, and dealership said the c-clip doesn't sell separately and require to buy a new air filter intake system. And not able to find a used one.....

http://www.ecstuning.com/BMW-E92-335i-N54_3.0l/Engine/Intercooler/ES39182/

Did you get this C-Clip ? Did it do the Job? I am in need of one urgently too. It seems compatible to the N55 as well.

[BQTuning]

I have an OEM for sales $80 , yes I know I'm price gouging, it also come with the o ring

[FL335]

ECS fkn rules for selling these. BMW doesn't sell these separately...you have to buy the CP I believe just to get that C Clip. I swapped my CP a few months ago and this looks exactly like the OEM.

[BQTuning]

Originally Posted by FL335

ECS fkn rules for selling these. BMW doesn't sell these separately...you have to buy the CP I believe just to get that C Clip. I swapped my CP a few months ago and this looks exactly like the OEM.

From what I understood from ECS that is not the c-clip replacement for the charge pipe connection to the throttle body. Maybe it was old news, dunno, but I would recommend to contact them first to confirm

[FL335]

Originally Posted by BuraQ

From what I understood from ECS that is not the c-clip replacement for the charge pipe connection to the throttle body. Maybe it was old news, dunno, but I would recommend to contact them first to confirm

Oh yeah...That bites. Someone needs to make these.

[Jeef]

this clip doesn't work for the charge pipe its too small

[N55Jamaican]

Originally Posted by BuraQ

I have an OEM for sales $80 , yes I know I'm price gouging, it also come with the o ring

I am interested in this C-Clip and o_ring, are they new?. Could you PM me cost to Florida 33126? I see your in Florida so maybe free shipping?

How is it that NO vendor has been able to duplicate these yet...they'd be an easy sell.

[BQTuning]

Originally Posted by Totalelectronics

I am interested in this C-Clip and o_ring, are they new?. Could you PM me cost to Florida 33126? I see your in Florida so maybe free shipping?

I will PM pictures and I need to check to see that the O ring hasnt dried up, they've been in my garage for a while now...lol

Will follow up soon

[N55Jamaican]

Originally Posted by BuraQ

I will PM pictures and I need to check to see that the O ring hasnt dried up, they've been in my garage for a while now...lol

Will follow up soon

No need for it again friend. I have a friend at the dealer who got me a used C-clip from an old bust charge pipe that was already replaced from another car.
Got the O-ring for $8.

[jbarzelatto]

Originally Posted by BuraQ

I will PM pictures and I need to check to see that the O ring hasnt dried up, they've been in my garage for a while now...lol

Will follow up soon

but does anyone have THIS c clip? Please notice its different!!