|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Software update E89X-13-03-504 and a scratch.. :-(
|
|
05-27-2013, 10:48 AM | #1 |
New Member
3
Rep 28
Posts |
Software update E89X-13-03-504 and a scratch.. :-(
Went to the dealer with SIB 12-09-12 in hand for low speed intermittent loss of power. I have the PPK installed with previous integration version E89X-12-03-502. Left the dealer with a 1in long scratch on the door and a gutless E90. They upgraded the software to E89X-13-03-504. Final report shows ISTA/P version 49.4. The car seems to have lost a bit of power. Does anyone have any insite as to what this software version has done to the DME? I have an appointment at the dealer again to have the car door resprayed at an indepentant bodyshop. What can I mention to them about the car's lack of performance? Is it possible that the PPK did not make it back in the DME?
|
05-28-2013, 12:25 PM | #5 |
New Member
3
Rep 28
Posts |
Brought the car to Bill Jacobs in Naperville. They seem really nice there are were willing to take care of the scratch. I hope you guys are right about the software because the car feels gutless after the upadate. I keep asking for some kind of paperwork/printout showing that the PPK is actually installed in the car but they say it cant be done?
|
Appreciate
0
|
05-28-2013, 10:51 PM | #8 |
New Member
3
Rep 28
Posts |
Update was done under warrenty since I had a SIB.
As far as the PPK is concerned, they state your VIN is registered in the system and all updates are downloaded with PPK. however, everytime I ask for a printout they say their system cant print out anything but a final report. The report has no mention of PPK programming. |
Appreciate
0
|
05-28-2013, 10:54 PM | #9 |
Brigadier General
89
Rep 3,732
Posts
Drives: BMW S1000XR
Join Date: Jun 2011
Location: Gilbert, AZ
|
Borrow a boost gauge. The stock boost is about 8-9 psi and PPK should be higher.
__________________
BMWCCA member |
Appreciate
0
|
05-28-2013, 11:09 PM | #10 |
First Lieutenant
14
Rep 308
Posts |
Does anyone know if the PPK option is reflected in the VO? If so, what is the option code? And how do you read the firmware version on the DME? I assume the PPK has its own firmware versions.
|
Appreciate
0
|
05-31-2013, 11:52 PM | #11 | |
Banned
125
Rep 2,172
Posts |
Quote:
|
|
Appreciate
0
|
06-01-2013, 05:56 PM | #13 | |
Banned
125
Rep 2,172
Posts |
Quote:
As for the transmission, 7615835 is the assembly number for the Alpina flash on module GKE215. I actually had the base PROcede flash on my car and it was causing low boost codes after I had the turbos replace. I didn't put the PROcede back in because I'm doing some flash testing so I ended up just flashing my MSD80 back to stock myself. Funny part is the flash only takes a few minutes and it fixed the low boost issue, but at the dealership they say it takes more than an hour. WTF? I also have an MSD81 sitting on the shelf waiting for swap out as I plan on testing both MSD80 and MSD81 Alpina DME assembly numbers to see which one works well with our AT 335's... So move over PPK lovers, Alpina flash should blow your socks off performance wise. |
|
Appreciate
0
|
06-01-2013, 06:29 PM | #14 |
New Member
3
Rep 28
Posts |
See now I am really confused.. I just pulled my info below?
ZB number for the DME/DDE 12 DME/DDE OKAY 8615786 MYVIN# 24.05.2013 But you said I should be at 7626438 ??? I cant find the zb in WinKFP? Any thoughts? What am I running? Is it a PPK flash cus I have my doubts that the dealer did it right?? |
Appreciate
0
|
06-01-2013, 06:33 PM | #15 |
New Member
3
Rep 28
Posts |
Date: 01.06.2013 09:14:22
Model: E89X Scope: all control module JobStatus: OKAY Quantity: 27-----------------------------------------------------------------ADR Gen. name JobStatus 50 SINE ERROR_ECU_SUBFUNCTION_NOT_SUPPORTED__INVALID_FORMA T-----------------------------------------------------------------ADR Gen. name JobStatus ZB No. VIN No. Date 00 JBBF OKAY 9298946 MYVIN# 24.05.2013 01 MRS OKAY 9184433 ÿÿÿÿÿÿÿ 07.03.2011 12 DME/DDE OKAY 8615786 MYVIN# 24.05.2013 17 EKP OKAY 7276046 0000000 01.03.2011 18 EGS OKAY 7624276 MYVIN# 09.03.2011 19 VGSG OKAY 7607980 ÿÿÿÿÿÿÿ 04.01.2010 20 RDC OKAY 6793122 ÿÿÿÿÿÿÿ 15.02.2010 27 PGS OKAY 9134708 0000000 06.06.2006 29 DSC OKAY 6780162 0000000 01.07.2009 36 TEL/MULF OKAY 9257165 ÿÿÿÿÿÿÿ 28.02.2011 37 AMP OKAY 9218086 ÿÿÿÿÿÿÿ 21.02.2011 40 CAS OKAY 9287534 MYVIN# 24.05.2013 41 DWA OKAY 9244134 ÿÿÿÿÿÿÿ 17.06.2010 56 FZD OKAY 9225464 0000000 10.01.2008 60 KOMBI OKAY 9242370 MYVIN# 20.02.2011 61 FBI OKAY 9257168 MYVIN# 28.02.2011 62 MOSTGW OKAY 9284327 MYVIN# 20.04.2012 63 MASK/CCC OKAY 9283420 MYVIN# 20.04.2012 64 PDC OKAY 9252639 ÿÿÿÿÿÿÿ 01.03.2011 67 ZBE OKAY 9249439 0000000 10.11.2011 6D FAS OKAY 9264974 MYVIN# 24.05.2013 72 FRM OKAY 9308370 MYVIN# 24.05.2013 73 CID OKAY 9211969 ÿÿÿÿÿÿÿ 25.02.2011 78 KLIMA OKAY 9292262 MYVIN# 24.05.2013 92 VIRTSG92 OKAY 9180490 0000000 25.02.2011 A0 CCC OKAY 9284329 MYVIN# 20.04.2012 ================================================== == |
Appreciate
0
|
06-01-2013, 11:43 PM | #16 | |
Captain
105
Rep 955
Posts |
Quote:
It should also be register with your dealer under service history |
|
Appreciate
0
|
06-01-2013, 11:46 PM | #17 | |
Captain
105
Rep 955
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|