[bmw325i]

Originally Posted by taibanl

Good Point - however wouldn't he need to do something to WRITE his pre-existing VO to the new HU? I am not a coder but I think I remember somebody working a similar issue having to do something to propagate the values back to the 2URAD

You have to reset 2urad and it will get recoded based on the VO.

[BostonBeemah]

I'm looking to do this for my 2010 base to HiFi. I purchased the From-3/09 kit: 65412163268. I am planning on coding to HiFi and switching the switch on the amp to position 1. For the coding, I'm under the impression of adding $676 to the VO and coding the Cas, 2uard, and Cic module in expert mode after adding. Does this seem to be correct before diving into the install??

Thanks

[ctuna]

Cic does not use the 2urad files or there versions.

For cic

First add $676 to VO, then FA_write in FRM and CAS.

Then, using NCS, with the profile "expert", code the following modules :

CHOST
CAPPL
CGATE
CAUDI
CTUNE

to code, you just have to make an "SG_CODIEREN" on the modules, with expert profile. NO BLANK .MAN FILE ! No need to read the modules first, just code...

Then stop the car, wait for a few minutes (useless ?) and enjoy for Hifi !

If you just add an amp for front speaker and sub, the the PDC sounf from the rear will become low, but just enough.

from http://www.e90post.com/forums/showth...hlight=Logic+7

[Technic]

Originally Posted by ctuna

Cic does not use the 2urad files or there versions.

For CCC

First add $676 to VO, then FA_write in FRM and CAS.

Then, using NCS, with the profile "expert", code the following modules :

CHOST
CAPPL
CGATE
CAUDI
CTUNE

to code, you just have to make an "SG_CODIEREN" on the modules, with expert profile. NO BLANK .MAN FILE ! No need to read the modules first, just code...

Then stop the car, wait for a few minutes (useless ?) and enjoy for Hifi !

If you just add an amp for front speaker and sub, the the PDC sounf from the rear will become low, but just enough.

from http://www.e90post.com/forums/showth...hlight=Logic+7

Fixed...

[BostonBeemah]

Originally Posted by ctuna

Cic does not use the 2urad files or there versions.

For cic

First add $676 to VO, then FA_write in FRM and CAS.

Then, using NCS, with the profile "expert", code the following modules :

CHOST
CAPPL
CGATE
CAUDI
CTUNE

to code, you just have to make an "SG_CODIEREN" on the modules, with expert profile. NO BLANK .MAN FILE ! No need to read the modules first, just code...

Then stop the car, wait for a few minutes (useless ?) and enjoy for Hifi !

If you just add an amp for front speaker and sub, the the PDC sounf from the rear will become low, but just enough.

from http://www.e90post.com/forums/showth...hlight=Logic+7

Awesome thanks for the quick reply! Will try it out when I install it and report back!

[ctuna]

Does cic use less or different files, as opposed to ccc?
I think the answer might be less ?

[amdbrutale]

Hi to all,

i have a e91 2008/09 with basic business radio. Is it possible to recode the radio to flatten the radio outpu (high or low)?

Can JBL MS-A1004 amp with its dsp de-EQ the radio outputs?

Best regards

[ctuna]

JBL MS-A1004 only has an electronic crossover not DSP.
Its not a DSP in the sense that it has 32 band of eq and time delay.
It only has electronically adjustable crossover points instead of adjustment
pots. Donwload the manual.
I don't see an evidence that the business radio is reprogrammable
on this forum .

[Pilot1981]

hi,
I have E91 LCI 2011 with idrive 2 (CIC) with radio professional, if I add alpine kit I have to do this?

First add $676 to VO, then FA_write in FRM and CAS.

Then, using NCS, with the profile "expert", code the following modules :

CHOST
CAPPL
CGATE
CAUDI
CTUNE

what I have to do to these ECU's?

It's also valid this procedure?

[BostonBeemah]

Sg_codierden on all the modules after you do the fa_write in expert mode

[Tr1ppy]

Hi,
I have a 2008 E93 with CCC pro nav. How do i go about coding to Hifi from Base please?

Is it the same procedure as CIC above?

Thanks

[ctuna]

http://www.e90post.com/forums/showthread.php?t=802793

Don't know if this will help.

This guy can help but he's is in London and generally very busy.

http://www.e90post.com/forums/showthread.php?t=704363

[Tr1ppy]

Originally Posted by ctuna

http://www.e90post.com/forums/showthread.php?t=802793

Don't know if this will help.

This guy can help but he's is in London and generally very busy.

http://www.e90post.com/forums/showthread.php?t=704363

Thanks I'll have a look into those posts. Yes it seems Makkan is too far away from me since I live in Manchester

[SechszylinderReihen]

Guys I've read through all the threads on recoding the headunit to HIFI but I cannot see the forest for the trees.

Is there any step by step DIY guide for coding to HIFI? I do have ISTA / NCSexpert etc and know my way around a little bit.

My car is a German 2009 E90 with the base "professional" audio system, no navigation.

I'm also installing a DSP amplifier so I might not even have to recode to HIFI, is that correct?