E90Post
 


GetBMWParts
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY: Installing Power Folding Mirrors with Autodimming feature



Reply
 
Thread Tools Search this Thread
      08-08-2015, 01:29 PM   #89
Pilot1981
Enlisted Member
Pilot1981's Avatar
Italy
2
Rep
47
Posts

Drives: Bmw 320d xdrive lci
Join Date: Nov 2014
Location: Italy

iTrader: (0)

in last FRM3 there isn't a value to change to enable LIN BUS?

I found this in FRM3:

ASP_NO_SPIEGEL_LIN_START not enabled

In NCSDUMMY I don't find translation, so I need to enable also it?
Appreciate 0
      11-12-2015, 12:10 PM   #90
KHEETHEM
New Member
0
Rep
6
Posts

Drives: F30 316d
Join Date: Nov 2014
Location: Belgium

iTrader: (0)

Swap to LCI versions

Actually I do have all the function on my car (memory seats, auto folding, auto dimming, park function etc) and they have the 5pins connector

My car is a PRE LCI e93 from 04/2008

I want to go to the LCI mirrors in stead of the PRE LCI's.

Are these compatible, knowing that I want to keep all functions except the dimming function?

Are 3pin LCI versions okay to do this?
Appreciate 0
      05-18-2016, 11:43 AM   #91
cally4x4
New Member
0
Rep
5
Posts

Drives: E90 320d
Join Date: Dec 2015
Location: Uk

iTrader: (0)

I've been searching the Internet for ages for info on wiring mods needed to install folding mirrors on non memory seats but it seems to be the worlds best kept secret so many people say they have done loads of mirror retrofits but once asked how they run for the hills is there no one out there who will share
Appreciate 0
      05-18-2016, 11:50 AM   #92
Augster
Master Gunner
36
Rep
432
Posts

Drives: 2008 335i Sport
Join Date: Aug 2013
Location: Sandy Eggo

iTrader: (0)

Garage List
Quote:
Originally Posted by cally4x4 View Post
I've been searching the Internet for ages for info on wiring mods needed to install folding mirrors on non memory seats but it seems to be the worlds best kept secret so many people say they have done loads of mirror retrofits but once asked how they run for the hills is there no one out there who will share
Or we've done swaps where the wiring was already in place and only required coding.

I certainly would have provided any help if I had to rewire my retrofitting of LCI power folding mirrors to my non-LCI manual fold E90, but it was basically a bolt-on followed by coding.
__________________
2008 335i Alpine White Sport Sedan AT | Avant Garde M364 Staggered 19"
Appreciate 0
      05-18-2016, 11:56 AM   #93
Augster
Master Gunner
36
Rep
432
Posts

Drives: 2008 335i Sport
Join Date: Aug 2013
Location: Sandy Eggo

iTrader: (0)

Garage List
...I should add that it might be helpful for you to compare the wiring schematic of your vehicle to one with power-folding mirrors. Specifically, you want to see if the same color-coded wires are in place and to the same pin positions. If there is no difference, then it should be a bolt-on plus coding.

The old online WDS via BMW-Planet appears to no longer work, but try this: http://www.bmwtech.ru/wds/
__________________
2008 335i Alpine White Sport Sedan AT | Avant Garde M364 Staggered 19"
Appreciate 0
      05-18-2016, 12:34 PM   #94
cally4x4
New Member
0
Rep
5
Posts

Drives: E90 320d
Join Date: Dec 2015
Location: Uk

iTrader: (0)

Quote:
Originally Posted by Augster View Post
...I should add that it might be helpful for you to compare the wiring schematic of your vehicle to one with power-folding mirrors. Specifically, you want to see if the same color-coded wires are in place and to the same pin positions. If there is no difference, then it should be a bolt-on plus coding.

The old online WDS via BMW-Planet appears to no longer work, but try this: http://www.bmwtech.ru/wds/
Cheers for the link dude
I wasn't moaning about anyone in my last post just that's there is so much info out there for the folding mirrors and the coding but it always stops once it gets to the wiring lol
Appreciate 0
      05-18-2016, 12:43 PM   #95
djerik
New Member
Denmark
4
Rep
15
Posts

Drives: E91 LCI 320D 2009
Join Date: Jul 2013
Location: Denmark - Ikast

iTrader: (0)

Garage List
Quote:
Originally Posted by cally4x4 View Post
I've been searching the Internet for ages for info on wiring mods needed to install folding mirrors on non memory seats but it seems to be the worlds best kept secret so many people say they have done loads of mirror retrofits but once asked how they run for the hills is there no one out there who will share
I did a hybrid installation using both standard wires (inside left door) and modified wires (cabin to doors and inside right door). I did not make my own notes, but combined info from existing sources. WDS is very useful here. As a shortcut to WDS you could see this guys pictures, the last picture show the pin number for the lin bus wires that is missing in a non-memory car as yours.

https://drive.google.com/folderview?...VR2M0Y3Q1pIOTQ
Appreciate 0
      05-18-2016, 12:50 PM   #96
cally4x4
New Member
0
Rep
5
Posts

Drives: E90 320d
Join Date: Dec 2015
Location: Uk

iTrader: (0)

Thanks I'm just installing Windows onto a laptop to view the wds website
Thanks for the reply and info guys I haven't ordered the mirrors yet in fear I'd get the wrong ones I'd like to get the lci ones for a better rear view and to fit in with the planned lci front end conversion
Appreciate 0
      05-18-2016, 01:45 PM   #97
djerik
New Member
Denmark
4
Rep
15
Posts

Drives: E91 LCI 320D 2009
Join Date: Jul 2013
Location: Denmark - Ikast

iTrader: (0)

Garage List
More ISTA/WDS screenshots
Attached Images
File Type: pdf Notesforinstallations.pdf (281.7 KB, 181 views)
Appreciate 0
      05-18-2016, 02:49 PM   #98
cally4x4
New Member
0
Rep
5
Posts

Drives: E90 320d
Join Date: Dec 2015
Location: Uk

iTrader: (0)

Quote:
Originally Posted by djerik View Post
More ISTA/WDS screenshots
Thanks djerik
Is that a model with folding mirrors?
Appreciate 0
      05-18-2016, 02:56 PM   #99
djerik
New Member
Denmark
4
Rep
15
Posts

Drives: E91 LCI 320D 2009
Join Date: Jul 2013
Location: Denmark - Ikast

iTrader: (0)

Garage List
Quote:
Originally Posted by cally4x4 View Post
Thanks djerik
Is that a model with folding mirrors?
I remember it as wiring diagrams matching a LCI with folding mirrors
Appreciate 0
      06-22-2016, 03:39 PM   #100
thesanchez
Private
United Kingdom
8
Rep
59
Posts

Drives: E92 325i M Sport
Join Date: Apr 2015
Location: UK

iTrader: (1)

Well a massive thanks to Jose_JN and Augster for their input in this thread. After AGES trying to get this to work and messing around with Carly/crappy ebay cables I finally got this retrofit up and running on my car by using a proper cable and their easy to follow steps. Massive thanks to both of you for your input.
__________________

E92 325i M Sport | Bilstein B14 PSS | 19" Rotiform RSE

Last edited by thesanchez; 06-24-2016 at 07:52 AM.
Appreciate 0
      07-06-2016, 09:50 AM   #101
WonderBang
Private First Class
4
Rep
138
Posts

Drives: 2007, 325i M-Sport, Black
Join Date: Mar 2014
Location: London, UK

iTrader: (0)

Awesome guide I'll be using it later today
Appreciate 0
      04-26-2017, 01:25 AM   #102
Dntone1491
New Member
United_States
0
Rep
24
Posts

Drives: 2011 BMW 335is
Join Date: Mar 2017
Location: Sacramento

iTrader: (0)

Quote:
Originally Posted by Augster View Post
I finally got around to retrofitting the power/heated/dimming mirrors (LCI version) and these are the coding changes I performed (in conjunction with a dimming interior mirror):

VO
  • Fold-in Outsider Mirror: $313
  • Interior/Outside Mirror with Automatic Dip: $430
  • Interior Mirror with Automatic-Dip: $431

NFRM
  • Folding Outside Mirrors: SPIEGEL_EINKLAPPEN = aktiv
  • Automatic Electrochromatic Dimming Mirror: SPIEGEL_ELEKTROCHROM = aktiv
  • Outside Mirrors Heating: SPIEGEL_HEIZUNG = aktiv
  • Comfort Closing Folding Outside Mirrors: SPIEGEL_KOMFORT_EINKLAPP = aktiv

CAS
  • Comfort Opening with Remote Control: KOMFORTOEFFNUNG_FB = aktiv
  • Comfort Closing with Remote Control: KOMFORTSCHLIESSUNG_FB = aktiv

FZD
  • Automatic Electrochromatic Dimming Mirror: EC_SPIEGEL = aktiv

For the Comfort Closing with Remote Control, the mirrors will power fold only after holding the Lock button for the prescribed amount of time. The mirrors will automatically unfold the moment the car is unlocked. Cool stuff!

I did notice that the driver's mirror appears somewhat curved and thus slightly distorts the reflection enough that it sometimes causes my vision to seem crossed. Not sure if this convex curvature is normal with the LCI version, heated glass, both, or perhaps the used glass is defective in some way. My original non-heated pre-LCI mirror is flat with no distortion.

BTW, since I have a sedan, I had to remove the door panels in order to remove the tweeter covers since they are integrated with the wrap-around window frame trim cover.
Ok so I followed this step by step and can't get some code to appear. The code in the NFRM does not show. Any ideas?
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 10:12 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST