[Fisenko]

so here is my issue and if anyone wants to help out that would be greatly appreciated. bought a 2007 e90 335, it was hit in the suspension, i changed the suspension got it running and went to drive it i have brake light, dsc, hill assist doesnt work and adaptive headlights dont work. Seems like the common steering angle issue from research, cleaned the disk on the steering angle sensor and lights still on. So i went to local junkyard and got a used steering angle sensor, bought inpa, tool32, winkfr, rheingold, got it downloaded on my laptop. I was gonna try resetting the steering angle sensor with rheingold, and if that didnt work i would change the sensor with the used one i got, so my question is can anyone guide me through of how to code in a new steering angle sensor, or even guide me of how to try to reset the current one i have. because i am completly new to coding and really dont want to screw anyting up and make more issues for myself. thanks alot in advance and excuse my horrible grammer.

[Sensible_]

http://www.e90post.com/forums/showthread.php?t=914544

See half way down for screen shots. Tool32 is fine for this.

[Fisenko]

when i click on the folder in the corner i dont see the dsc87 is there a to get that there? do i have to get the sp daten?

[Sensible_]

Yes of course. Download latest spdaten. Then install with 'BMW Coding Tool'.

[Fisenko]

how exactly do i do that? i mean i know how to download but not sure how to install

[wildcatcrazy]

Originally Posted by Fisenko

how exactly do i do that? i mean i know how to download but not sure how to install

Once you get the DATENs downloaded, BMW Coding tool has you select the Daten folder. Then, right below that button, there are two more. One for NCS and one for WinKFP.