[JAL0988]

I'm about to order this rear diffuser:

http://www.bimmerkit.com/e92-perform...-diffuser.html

I just wanted to know what is involved in installing it. I am not experienced with cosmetic mods. On a scale from 1 to 10, how hard is it?
Thanks

[kdbryce]

I haven't done it, but I'm about to.

I looked under there and it looks pretty straight forward. There's bound to be a DIY on here too.

if you just take a peak, I'm sure you'll figure it out.

Unless there's something I'm missing

[-Wingman-]

Takes like 10 minutes.

And maybe I'm wrong, but I've heard nothing but bad things about the duke dynamics diffusor....

[JAL0988]

Originally Posted by kdbryce

I haven't done it, but I'm about to.

I looked under there and it looks pretty straight forward. There's bound to be a DIY on here too.

if you just take a peak, I'm sure you'll figure it out.

Unless there's something I'm missing

I couldn't find a DIY on here, would you mind posting it?

[JAL0988]

Originally Posted by -Wingman-

Takes like 10 minutes.

And maybe I'm wrong, but I've heard nothing but bad things about the duke dynamics diffusor....

I heard that in the past and that's why I'm also considering this one from m0d bargains.

http://www.**********s.com/BMW-Perfo...r-Diffuser.htm

[rbtamms]

Here, check this thread...

http://www.e90post.com/forums/showthread.php?t=447947

[JAL0988]

Originally Posted by rbtamms

Here, check this thread...

http://www.e90post.com/forums/showthread.php?t=447947

That's for the e90, I need one for the e92. I saw that earlier but it only shows the e90 instructions and trimming.

[mob17]

Very easy. Get under your rear bumper and you'll see a few metal clips with hex nuts going through them, connecting your stock diffuser and bumper. Unclip these ones. Then you just need to push out on the tabs of your stock diffuser that go through slots in your stock bumper.

To fit the new one just follow the instructions in reverse.